Kidney Injury Caused by Preeclamptic Pregnancy Recovers Postpartum in a Transgenic Rat Model

Preeclampsia (PE) is characterized by the onset of hypertension (≥140/90 mmHg) and presence of proteinuria (>300 mg/L/24 h urine) or other maternal organ dysfunctions. During human PE, renal injuries have been observed. Some studies suggest that women with PE diagnosis have an increased risk to develop renal diseases later in life. However, in human studies PE as a single cause of this development cannot be investigated. Here, we aimed to investigate the effect of PE on postpartum renal damage in an established transgenic PE rat model. Female rats harboring the human-angiotensinogen gene develop a preeclamptic phenotype after mating with male rats harboring the human-renin gene, but are normotensive before and after pregnancy. During pregnancy PE rats developed mild tubular and glomerular changes assessed by histologic analysis, increased gene expression of renal damage markers such as kidney injury marker 1 and connective-tissue growth factor, and albuminuria compared to female wild-type rats (WT). However, four weeks postpartum, most PE-related renal pathologies were absent, including albuminuria and elevated biomarker expression. Only mild enlargement of the glomerular tuft could be detected. Overall, the glomerular and tubular function were affected during pregnancy in the transgenic PE rat. However, almost all these pathologies observed during PE recovered postpartum.     

Biosynthesis of unsaturated fatty acids in the diatomPhaeodactylum tricornutum

The biosynthesis of fatty acids in the diatomPhaeodactylum tricornutum was studied. The diatom was incubated with sodium [1¹⁴C] acetate and the acids [1-¹⁴C] palmitic, [1-¹⁴C] stearic, [1-¹⁴C] linoleic and [1-¹⁴C] α-linolenic. The distribution of radioactivity in the products was determined by gas liquid radiochromatography. The diatom synthesized “de novo” not only saturated and monounsaturated fatty acids, but also linoleic, α-linolenic and other fatty acids including the highly polyunsaturated 20∶5ω3 and 22∶6ω3. When labeled acetate, stearic, α-linolenic or even linoleic acid were incubated with the diatom, the polyunsaturated C₂₀ fatty acids synthesized belonged predominantly to the ω 3 family. The existence of Δ9, Δ6, Δ5, Δ4, ω6 and possibly ω3 desaturases inP. tricornutum is suggested. Member of the Carrera del Investigador Científico of the Comisión de Investigaciones Científicas de la Provincia de Buenos Aires. Member of the Carrera del Investigador Cientifico of the Consejo Nacional de Investigaciones Cientificas y Técnicas.     

Rancidity development during the chilled storage of farmed Coho salmon (Oncorhynchus kisutch)

Coho salmon (Oncorhynchus kisutch) is a fatty fish species whose farming production has greatly increased in recent years. Lipid damage produced during Coho salmon chilled storage was studied for up to 24 d. Lipid hydrolysis (free fatty acids, FFA) and oxidation (conjugated dienes; peroxide value, PV; thiobarbituric acid index, TBA‐i; fluorescent compounds formation, FR; browning development) were determined and compared to lipid composition (polyene index, PI; astaxanthin, AX) changes and sensory assessment (rancid odour development) results. Most lipid damage indices developed slowly during storage; thus, values obtained for FFA, PV, TBA‐i and FR were in all cases under 1.5 g/100 g, 4.0 meq oxygen/kg lipid, 0.40 mg malondialdehyde/kg muscle and 0.40, respectively. Odour assessment showed a significant (p <0.05) rancidity development at day 10, when compared to starting fish material; then, non‐acceptable values were obtained at days 19 and 24. The PI analysis showed not many differences during the storage time, with the lowest mean value at day 19. AX analysis indicated a relatively high content in the white muscle, which was maintained till the end of the experiment. A low oxidation development is concluded for Coho salmon lipids when compared to other fatty fish species under the same chilling conditions. AX was found to contribute to the oxidation stability of Coho salmon lipids, due to its free radical scavenger properties.     

Modelling of solvent positions around polar groups in proteins

Previous analysis of the distribution of experimental solventmolecule positions around amino acid side chains showed thatdistinct clustering occurred close to polar or charged atomsin proteins. We have used those data to predict likely solventpositions around proteins not used in our initial analysis.We envisage that this algorithm, AQUARIUS, will be useful forfinding solvent positions in electron density maps generatedby protein crystallography and as useful starting positionsfor solvent molecules in computer simulation studies of macromolecules.     

Tensile modulus modeling of carbon‐filled nylon 6,6 and polycarbonate‐based resins

Electrically and thermally conductive resins can be produced by adding conductive fillers to insulating polymers. Mechanical properties, such as tensile modulus, are also important. This research focused on performing compounding runs followed by injection molding and tensile testing of carbon‐filled nylon 6,6 and polycarbonate‐based resins. The three carbon fillers investigated included an electrically conductive carbon black, synthetic graphite particles, and a milled pitch–based carbon fiber. For each polymer, resins were produced and tested that contained varying amounts of these single‐carbon fillers. In addition, combinations of fillers were investigated by conducting a full 2³ factorial design and a complete replicate in each polymer. These tensile modulus experimental results were then compared to results predicted by several different models. For the composites containing only one filler type, the Nielsen model with the modified Ψ term provided the best prediction of the actual experimental values. For the composites containing more than one filler type, a new parameter, which includes the vibrated bulk density (VBD) of the fillers, was incorporated into the Nielsen model with the modified Ψ term. This model with the new VBD parameter provided the best estimate of experimental tensile modulus for composites containing multiple‐filler types. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1716–1728, 2003     

Kinetics of Solid-State Reactions in Heterogeneous Catalysis from Time-Resolved X-Ray Absorption Spectroscopy

The potentials of X-ray absorption spectroscopy (XAS) (quantitative phase composition and average valence together with a short-range order structure analysis) combined with a time-resolution in the second range make time-resolved (TR-) XAS a powerful tool for investigating the reactivity of solids in catalysis and solid-state chemistry. General aspects of TR-XAS investigations are discussed (i.e., instrumentation, data analysis). In addition, some experiments illustrate how the kinetics of solid-state reactions in heterogeneous catalysis can be elucidated from TR-XAS studies.     

Nanoscratch testing to assess the fiber adhesion of short‐carbon‐fiber composites

In a composite material, the degree of adhesion between the fiber and the matrix plays an important role in the overall performance of the material. Because the load between the fiber and the matrix is realized throughout the interphase region material, a lot of effort has gone into characterizing the strength of the interphase. In this study, nanoscratch tests on the composite samples were used to provide a relative measure of adhesion in different composite materials. Carbon‐filled nylon 6,6 and polycarbonate resins were evaluated with this method. The carbon fillers we used were polyacrylonitrile‐based carbon fibers sized and surface‐treated for the respective matrix and pitch‐based carbon fibers without any sizing or surface treatment. Tensile and X‐ray photoelectron spectroscopy data for the composites we considered are also presented to compare to the nanoscratch results. It is shown that nanoscratch testing on the composites, with the proposed data analysis, can be an effective tool for determining the relative degree of adhesion between different composites. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 328–335, 2007     

Spezifische Bedarfe bei zahnärztlichen Patienten mit Demenz und ihre ethischen Implikationen

Definition of the problem

The central foundations of successful dental treatment consist of a trustful patient-dentist relationship, the professional and psychosocial expertise of the team treating the patient, and consideration of ethical aspects both during the therapeutic decision-making process and during the subsequent execution of therapy. This is especially true of the dental treatment of (mostly elder) persons with dementia, calling for an in-depth assessment of the various normative implications.

Arguments

In geriatric dentistry in particular, situational dilemmas regarding treatment often arise from specific constellations (e.?g. greatly reduced potential for dental therapy, lack of ability regarding oral hygiene and lack of individual patient responsibility) combined with an acute need for treatment and the necessary involvement of third parties. These dilemmas frequently place additional professional and normative demands on the dentist. The current contribution discusses this specific situation, first by way of theoretical discourse and subsequently with a case-related approach on the basis of two case histories.

Conclusion

It becomes clear here that classic state-of-the-art therapies are replaced by “compromise treatment” in many cases in geriatric dentistry. Such treatment follows divergent diagnostic and therapeutic rules, poses changed requirements in terms of communication and presents specific ethical challenges and pitfalls.

     

Impact of processing conditions and sizing on the thermomechanical and morphological properties of polypropylene/carbon fiber composites fabricated by material extrusion additive manufacturing

For the 3D printed composites, fiber alignment is affected by the direction of melt-flow during extrusion of filaments and subsequently through the printing nozzle. The resulting fibers orientation and the fiber-matrix compatibility have a direct correlation with mechanical properties. This study investigates the impact of processing conditions on the state of the carbon fiber types and their orientation on the mechanical properties of 3D-printed composites. Short and long carbon fibers were used as starting reinforcing materials, and the state of fibers at the beginning and on the printed parts were evaluated. Strong anisotropy in terms of mechanical properties (flexural and impact properties) was observed for the samples printed with different printing orientations. Interestingly, the number of voids in the printed composites was found to be correlated with the fiber types. The present work provides a step towards the optimization of tailored composite properties by additive manufacturing.