Know by a handful the whole sack: efficient sampling for top-k influential user identification in large graphs

Influence Maximization aims to find the top-K influential individuals to maximize the influence spread within a social network, which remains an important yet challenging problem. Most existing greedy algorithms mainly focus on computing the exact influence spread, leading to low computational efficiency and limiting their application to real-world social networks. While in this paper we show that through supervised sampling, we can efficiently estimate the influence spread at only negligible cost of precision, thus significantly reducing the execution time. Motivated by this, we propose ESMCE, a power-law exponent supervised Monte Carlo estimation method. In particular, ESMCE exploits the power-law exponent of the social network to guide the sampling, and employs multiple iterative steps to guarantee the estimation accuracy. Moreover, ESMCE shows excellent scalability and well suits large-scale social networks. Extensive experiments on six real-world social networks demonstrate that, compared with state-of-the-art greedy algorithms, ESMCE is able to achieve almost two orders of magnitude speedup in execution time with only negligible error (2.21 % on average) in influence spread.     

管材超声波分层缺陷检测中盲区的构成探析

管材超声波分层检测作为控制产品质量的关键步骤,必须引起相关从业人员的重视,特别是要重点分析分层缺陷检测中盲区的构成原因和分布特征。只有这样,才能切实保证检测结果的准确性,更好地控制管材质量。通过对超声波分层缺陷检测的重要性进行阐释,分析了其中盲区的构成和分布等问题。     

壳聚糖固定化脲酶生物传感器选择性测定铜离子

基于重金属对脲酶的抑制作用,研制了用于测定铜离子的生物传感器。该生物传感器的制备以壳聚糖为载体,将脲酶固定于pH电极表面。由于壳聚糖对Cu2+的富集,该生物传感器展现出高灵敏度。在样品溶液中加入5 mmol/L NaI,可以消除Hg2+和Ag+的干扰,从而实现Cu2+的选择性检测。在0.005～0.5μg/mL的浓度范围内,脲酶活性的抑制率与Cu2+浓度的对数呈良好的线性响应关系,其检出限为0.002μg/mL。将使用后的生物传感器浸泡于0.5 mmol/L的EDTA溶液再生5 min,被Cu2+抑制的脲酶的活性可以得到恢复。     

无患子表面活性物及其复配体系的性质研究

对天然植物原料无患子提取物中的表面活性物的性质（临界胶束浓度、表面张力和起泡性能）及其影响因素（温度、pH、水硬度和盐度等）进行了系统的研究，结果表明无患子表面活性物具有很低的cmc和γcmc，且在一定范围内受一些因素的影响也不大，是一种理想的香波原料；同时也研究了无患子活性物与其他温和型的阴离子表面活性剂的复配体系，表明具有明显的协同增效效果。     

Photoelectric conversion of photosynthetic reaction center in multilayered films fabricated by layer-by-layer assembly

Multilayered protein films which contained ordered layers of photosynthetic reaction center (RC) from Rhodobacter Sphaeroides (RS601) were assembled by means of alternate electrostatic adsorption with positively charged poly(diallyldimethylammonium chloride) (PDDA). The assembly of RC was monitored by spectrometry and photocurrent measurement. Linear film growth was observed up to about 20 cycles of adsorption. For the monolayer film, the photocurrent was about 8.5 nA cm⁻². For the multilayered film, the total photocurrent was about 77 nA cm⁻² for the 24-layer RC film, while the average photocurrent increment per adsorption cycle was about 3.2 nA cm⁻². The overall light-to-electricity conversion efficiency for a 24-layer film was about eight times higher than that for the monolayer one. The effects of electrode potential and pH on the photocurrent were also measured to illustrate the light-to-electric converting mechanism.     

Coordination between strategic forest management and tactical logistic and production planning in the forestry supply chain

In this paper, we study the coordination mechanism in the forestry supply chain between strategic forest management and tactical production planning. We first formulate an integrated model to establish a theoretical benchmark for performance of the entire supply chain. It is a mixed integer programming model that involves harvesting, bucking, transportation, production, and sales decisions for both tactical and strategic planning levels. We then present two sequential approaches S‐A and S‐B where the coordination is done through internal pricing. S‐A is the approach currently used in practice where harvesting in the forest is the main driver of the supply chain activities and internal pricing is introduced to control bucking decision in a separate stage. In contrast, S‐B takes downstream demand information into consideration and internal pricing directly influences harvesting decision in the first stage. In order to find the appropriate setting of internal pricing that leads to the system optimum, we suggest two heuristics H‐I and H‐II. The internal pricing in H‐I is based on dual values and in H‐II, it is derived from a Lagrangian decomposition. A real‐life case study in the Chilean forestry industry is used to compare the results of different approaches. It is shown that the new sequential approach S‐B generates as good feasible solution as that obtained from the integrated approach but in much less time. Both heuristics H‐I and H‐II bring about near‐optimal feasible solutions. H‐II also provides optimistic bound of the optimal objective function value, which can be used as a measure of the solution quality.     

基于ECSS平台的板式换热器计算软件

以"面向对象的通用化工流程模拟软件ECSS"为平台,在其原来模块计算父类基础上设计了板式换热器模块计算子类,做出了板式换热器计算的数学模型,开发出了基于ECSS平台的板式换热器计算软件.可以对板片形式为等边三角形波纹板、不等边三角形波纹板、带褶三角形波纹板和不带褶三角形波纹板,流体的流道形式为1/1、1/2、1/3、1/4、2/2、3/3、4/4等流形的板式换热器进行计算.通过实例表明该软件具有较高的精确度,可以应用于实际的工程计算中.     

Modeling of photocatalytic oxidation of VOCs in a packed bed reactor under continuous and discontinuous illuminations

In this paper, a mathematical model is presented to describe the photocatalytic degradation of VOCs in a packed bed reactor. Here, the adsorption of VOCs on the wall of the reactor is taken into account and the diffusion of VOCs in the axial direction is neglected. First-order kinetics is used to describe the photocatalytic oxidation of VOCs. The analytical solution of the present model is obtained by traveling wave method. The solution shows that the reactor performance is totally dependent on the inlet concentration of VOCs when the time is large enough. The present model is validated through the experimental result of the photocatalytic oxidation of trichloroethylene in a packed bed and the predicted results accord well with the experimental data. The influence of flow rate and inlet concentration on the performance of the reactor is discussed in detail. High flow rate offers high reaction rate and low conversion efficiency. The different inlet conditions and different reaction patterns are also investigated. The model would be useful to estimate the rate constant and help to the design of the reactor.     

数据加密技术在计算机安全中的应用

随着计算机网络技术的不断发展,计算机互联网在人们的生活中应用越来越广泛,网络安全问题也随之而来。目前的计算机安全存在着诸多因素的威胁,研究人员也在致力于这方面的研究与发展,应用先进的技术来保证计算机安全,为计算机用户的信息安全提供更高的保障。本文将针对计算机安全问题进行分析,探讨数据加密技术在计算机安全中的应用。     

无线传感器网络的路灯远程控制系统设计

本设计基于TI公司的CC2480/ZigBee开发系统,设计了无线控制平台,论证了网络的组成、软件流程以及节能模式,旨在提供一种基于ZigBee无线技术的城市路灯照明系统解决方案,从而设计出低成本、高效能、全自动化的城市照明系统。