Change in molecular weight distribution by elution of polymers from PVA cast gel

Poly(vinyl alcohol) (PVA) cast gels with high degrees of polymerization and hydrolysis were prepared at room temperature. After sufficient exchange of the outer solvent by fresh pure water, the gel was re-dissolved in pure water at a high temperature. Using this solution, the cast gel was prepared again. This re-dissolution process was repeated again, and a third cast gel was prepared. During each swelling process after each cast-drying process, the amount of elution from the gel was measured and the molecular weight distributions of PVA in the gel as well as in the outer solvent were quantitatively evaluated. The molecular weight distribution of the eluted PVA was found to depend on that of the PVA in the gel; the average molecular weight gradually increased as the re-dissolution process was repeated, while the polydispersity indices of both the PVA from the gel and the eluted PVA decreased.     

Determination of dissolved natural thorium and uranium in Horonobe and Mizunami Underground Research Laboratory groundwater and its thermodynamic analysis

At two underground research laboratories situated at Horonobe and Mizunami, Japan, trace amounts of natural thorium and uranium dissolved in deep groundwater were investigated with the help of chemical pre-concentration method. The groundwater was sampled from underground boreholes under the geochemical condition of no atmospheric exposure, and the colloid contribution was checked by in situ two size-fractionated ultrafiltration systems. A rough decrease by half in the concentration after in situ filtration suggested the presence of natural colloids and suspended matter that were carriers of a portion of the elements. The Th and U concentrations in groundwater after 10 kDa filtration was evaluated as dissolved species, and was identified thermodynamically using existing hydrogeological and geochemical data, such as the mineral components in the groundwater at a given pH, ionic strength, concentration of co-existing ions, redox potential, and a hypothetical solubility-limiting solid phase. The crystalline solid phase of tetravalent thorium and uranium dioxides made the solubility very low compared with that of the amorphous phase.     

Experiments and simulations of uniaxial ratchetting deformation of Sn–3Ag–0.5Cu and Sn–37Pb solder alloys

This paper discusses uniaxial ratchetting deformation of lead-free solder alloy Sn–3Ag–0.5Cu and lead-containing solder alloy Sn–37Pb, which were subjected to tension–compression loading with several stress amplitudes and stress ratios, minimum stress over maximum stress. First the uniaxial ratchetting tests were conducted with three maximum stresses and four stress ratios. All tests were conducted using cylindrical bulk specimens of the solder alloys at 313 K. The test results show that there are differences in the ratchetting deformation behavior of the two solder alloys; the larger ratchetting strain occurs in the lead-containing solder alloy than in the lead-free solder alloy. The ratchetting deformation was simulated by the dislocation based constitutive model proposed by Estrin et al. (J Eng Mater Technol 118:441, 1996). The evolution equation of the back stress employed in the constitutive model was modified considering a dynamic recovery term. The effect of the modification of the back stress evolution is discussed by comparing the simulations with the corresponding experimental results. The simulations suggest that the recovery term in the kinematic hardening rule plays an important role in fitting the simulation to the experimental results of the ratchetting deformation of the solder alloys.     

Effect of Cation Doping on the Superplastic Flow in Yttria-Stabilized Tetragonal Zirconia Polycrystals

The superplastic characteristics of various cation-doped yttria-stabilized tetragonal zirconia polycrystals (Y-TZP) were examined. For 1 mol% cation doping the true stress of Y-TZP is very dependent on the ionic radii of the doped cations; for instance, smaller cation radii give rise to lower true stress when compared with the other compositions for the same grain size, strain rate, and testing temperature. The altered true stress level must be due to the change in diffusivity of the accommodation process for grain boundary sliding caused by the addition of cations in ZrO₂. The strain to failure of the doped zirconia is affected by both ionic radius and valence of the dopant cations.     

Simplified method for determining cadmium concentrations in rice foliage and soil by using a biosensor kit with immunochromatography

BACKGROUND: The behavior of cadmium in ecosystems needs to be monitored because of the human toxicity of this heavy metal. The need recently arose for a simple and quick on‐site test for trace levels of Cd in food and environmental samples. In response, an immunochromatographic assay kit for detecting Cd was manufactured by Kansai Electric Power Co. of Japan. This kit uses the antigen–antibody complex reaction between the Cd–EDTA complex and an anti‐Cd–EDTA antibody and shows the results in terms of the degree of color developed on a test paper. We previously reported the successful use of this kit to determine Cd concentrations in brown rice. Here, we applied the kit to the determination of Cd concentrations in rice foliage and soil. RESULTS: Cadmium in rice foliage was not extracted successfully by the method used for brown rice. However, it was successfully extracted by 0.1 mol L^?1 HCl solution at a rice foliage:HCl ratio of 1:20, and coexisting metals were removed sufficiently by the column treatment. The Cd concentrations determined by immunochromatographic assay were well correlated with the values obtained by acid decomposition and inductively coupled plasma mass spectrometry. The 0.1 mol L^?1 HCl‐extractable Cd concentration in soil was also determined successfully with the kit. CONCLUSION: Approximate Cd concentrations in rice plants and 0.1 mol L^?1 HCl‐extractable Cd concentrations in soil can be monitored easily and quickly by this method at locations where facilities for acid digestion and precision analysis are not available. Copyright © 2009 Society of Chemical Industry     

Formation of a Network Structure in the Gaseous Reduction of Magnetite Doped with Alumina

Reduction of un-doped magnetite is developed topochemically with the formation of a dense iron shell. However, the reduction of alumina-doped magnetite to wüstite proceeds with the formation of a network-like structure which consists of criss-crossed horizontal and vertical plates of wüstite. Reduction of magnetite includes the conversion of Fe³⁺ to Fe²⁺ and the movement of iron cations from the tetrahedral sites on the {400} and {220} planes of magnetite to the octahedral sites on the {200} planes of wüstite. Alumina has a negligibly small solubility in wüstite. In the reduction of magnetite doped with Al₂O₃, rejected Al³⁺ cations from wüstite diffuse to the magnetite–hercynite solid solution. Enrichment of the Fe₃O₄–FeAl₂O₄ solution with alumina in the vicinity of the reduction interface restricts the growth of {220} planes of wüstite and nucleation of {220} planes adjusted to the existing planes, preventing the merging of wüstite plates during the reduction process. Reduction of magnetite from the magnetite–hercynite solid solution practically stops when the Al³⁺ content at the interface approaches the solubility limit. Wüstite in the separated plates is reduced further to iron.     

Measurement and calculation of neutron densities in BWR high burn-up fuels

A neutron-scanning device was developed for measuring accurate neutron densities of BWR high burn-up fuels up to 65 GWd tU⁻¹. Characteristic test of this device was done with a ²⁵²Cf source and adopted to measure axial distributions of neutron densities of BWR spent fuels with various enrichments (2.0–3.4%), which had been irradiated up to 60 GWd tU⁻¹ at Fukushima Daini Nuclear Power Station Unit 2(2F-2). We found the measured neutron densities were proportional to about fourth power of the corresponding burn-up values. The neutron densities calculated by the ORIGEN2.1 code and various cross section libraries showed good agreements with the measured ones in profile and absolute value except for BWR-UE file mainly based on ENDF/B-IV. The BS240J32 library based on JENDL3.2 was the best among the investigated libraries.     

直流分量电流作CV电缆老化诊断方法的现场运用探讨

介绍在实际敷设电缆时如何有效消除杂散电流以期提高直流分量电流进行ＣＶ电缆老化监测的测试精度。     

Two-wavelength laser diode interferometer with time-sharing sinusoidal phase modulation

We describe an interferometer system that uses two separate wavelengths to measure step height. The overlapping interference images detected by a CCD camera are easily separated by an ordinary integrating-bucket method and time-sharing sinusoidal phase modulation, in which two laser diodes are alternately modulated with a sinusoidal signal. A phase map is obtained only for the laser diode into which the modulation signal is injected. In this instance, a 1-microm step height was accurately detected.