Microstructure and anodic polarization behavior of experimental Ag–18Cu–15Pd–12Au alloy in aqueous sulfide solution

The anodic corrosion behavior of an experimental Ag–15Pd–18Cu–12Au alloy in 0.1% Na₂S solution in relation to its microstructure was investigated using potentiodynamic and potentiostatic polarization techniques with analyses of corrosion products by X-ray diffractometry, Auger electron spectroscopy, and X-ray photoelectron spectroscopy. The role of Pd in improvement of the corrosion resistance was also investigated. In the potential/current density curve, three distinct current peaks, at –520 mV (peak I), –425 mV (peak II) and –175 mV (peak III), were observed. The Ag-rich ₂ matrix with coarse Cu and Pd-rich lamellae was the most corrosion-susceptible region, and this region was preferentially corroded at peak I with the formation of granular deposits of Ag₂S. A small amount of Ag–Cu mixed sulfide deposited on the Cu and Pd-rich coarse particles and dissolution of Ag as AgO^– might have occurred in parallel with Ag₂S formation at peak II. Enrichment of Pd on the alloy surface occurred at peak III due to preferential dissolution of Ag and Cu. A high level of corrosion resistance was attained with the formation of a thin Pd-rich sulfide film, which enhanced the passivity of the alloy in an alkaline sulfide solution. It was found that passivity is an important phenomenon not only for base metal alloys but also for noble metal alloys to maintain high levels of resistance to corrosion and tarnishing in sulfide environments.     

Analysis and Design of a Dynamic Predistorter for WCDMA Handset Power Amplifiers

This paper presents a dynamic predistorter (PD), which linearizes the dynamic AM-AM and AM-PM of a wideband code division multiple access handset power amplifier (PA). The dynamic PD allows an adjacent channel leakage power ratio (ACPR) improvement of 15.7 dB, which is superior to conventional PDs that linearize static AM-AM and AM-PM. The dynamic PD was designed using an HBT generating nonlinearity, a short circuit at the baseband (les4 MHz), and a load circuit for the HBT at the RF fundamental band (ap1.95 GHz). Volterra-series analysis was performed to understand the mechanism of the dynamic PD. The analysis revealed that the short circuit at the baseband enabled the dynamic PD generating third-order intermodulation distortion (IMD3) with opposite phase to the fundamental tone (i.e., antiphase IMD3). The antiphase IMD3 allows dynamic gain compression, which linearizes the dynamic gain expansion of a PA with low quiescent current. The analysis also revealed that the IMD3 amplitude of the dynamic PD can be adjusted by load impedance at the RF fundamental band, which enables the gradient of dynamic AM-AM and AM-PM to be optimized to linearize the PA. The fabricated two-stage InGaP/GaAs HBT PA module with the dynamic PD exhibited an ACPR of -40 dBc and a power-added efficiency of 50% at an average output power of 26.8 dBm with a quiescent current of 20 mA     

Investigation of gas-liquid interface in atmospheric-pressure micro plasma with solution

An atmospheric-pressure glow-discharge micro plasma in contact with liquid paraffin is stably generated by using a capacitively coupled plasma method with a mesh electrode. When characteristics of the plasma are measured in the boundary between the micro plasma (gas-phase) and liquid paraffin (liquid-phase) using optical emission spectroscopy, spectrum peaks of the emission of CH and C₂ which dissociate from paraffin are observed. The result indicates that solution can feed particles to the plasma at gas-liquid interface and this plasma is accordingly expected to promote an attractive plasma process for creating materials consisting of elements in various solutions.     

定向反射管束对辐照均匀性的影响

为使多孔陶瓷板燃气辐射器加热物体能量定向集中，减少向周围环境散失的热量，在辐射器的前方，设计了定向反射管束，并进行了被加热物体表面辐照度分布特性数值计算研究。利用蒙特卡罗法中的辐射分配因子计算并分析了相关参数，例如管束布置(顺排、叉排及节距)、加热距离、管间距及管长与半径比等对被加热物体表面辐照度均匀性的影响。通过计算得出定向反射管间距是影响均匀加热面积大小的主要因素，管束布置方式对辐照度均匀性影响较小；随管长与半径比增加，物体表面辐照度均匀时，对应的加热距离增加。计算结果为实际装置的优化设计提供了理论依据。     

Lateral Inhomogeneity in the Electronic Structure of a Conjugated Poly(3‐hexylthiophene) Thin Film

How annealing influences the morphology of a highly regioregular poly(3‐hexylthiophene) (RR‐P3HT) film at the substrate interface as well as the lateral inhomogeneity in the electronic structure of the film are elucidated. Whereas previous studies have reported that high‐molecular‐weight (MW) RR‐P3HT films tend to show low crystallinity even after annealing, it is found that high‐MW RR‐P3HT does show high crystallinity after annealing at high temperature for a long time. Photoemission electron microscopy (PEEM), X‐ray photoemission spectroscopy, and ultraviolet photoemission spectroscopy results clearly resolve a considerable lateral inhomogeneity in the morphology of RR‐P3HT film, which results in a variation of the electronic structure depending on the local crystallinity. The PEEM results show how annealing facilitates crystal growth in a high‐MW RR‐P3HT film.     

Design of plant safety model in plant enterprise engineering environment

Plant enterprise engineering environment (PEEE) is an approach aiming to manage the plant through its lifecycle. In such environment, safety is considered as the common objective for all activities throughout the plant lifecycle. One approach to achieve plant safety is to embed safety aspects within each function and activity within such environment. One ideal way to enable safety aspects within each automated function is through modeling. This paper proposes a theoretical approach to design plant safety model as integrated with the plant lifecycle model within such environment. Object-oriented modeling approach is used to construct the plant safety model using OO CASE tool on the basis of unified modeling language (UML). Multiple views are defined for plant objects to express static, dynamic, and functional semantics of these objects. Process safety aspects are mapped to each model element and inherited from design to operation stage, as it is naturally embedded within plant's objects. By developing and realizing the plant safety model, safer plant operation can be achieved and plant safety can be assured.     

Phospholipid polymer hydrogel formed by the photodimerization of cinnamoyl groups in the polymer side chain

We synthesized new polymers with both photocrosslinkability and biocompatibility by a random copolymerization of 4‐(4‐methoxycinnamoyl)phenyl methacrylate and 2‐methacryloyloxyethyl phosphorylcholine. These polymers were used as prepolymers to make a hydrogel by photoirradiation. Gelation began with 5 s of photoirradiation and reached an equilibrium state after 360 s of photoirradiation. The absorption maximum at 347 nm, attributed to the cinnamoyl group, disappeared with the photoirradiation time. That is, dimerization between cinnamoyl groups in the polymer proceeded and formed a hydrogel. The equilibrium water concentration of the hydrogels was more than 90%. Moreover, we succeeded in making a microshape hydrogel on glass by photoirradiation through a photomask. The window shape of the photomask was transferred to the hydrogel that was formed. We concluded that these photocrosslinkable polymers could be useful in preparing microfluidic devices for separating or immobilizing biomolecules and cells. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 44–50, 2007     

New fabrication technique for single-phase unidirectional SAW filter (EMUDT) in UHF range

New fabrication techniques for single-phase unidirectional SAW filters (EMUDT) utilising the self-aligned angle-evaporation technique are described. The experimental results show a directivity of 10.0 dB/transducer at 483 MHz.     

Intensely irradiated steel components: Plastic and fracture properties, and a new concept of structural design criteria for assuring the structural integrity

In order to develop a systematic and reasonable concept assuring the structural integrity of components under intense neutron irradiation, two basic tensile properties, true stress-true strain (TS-TS) curves and fracture strain, were investigated on an austenitic stainless steel and martensitic steel. Application of Swift equation is confirmed to a large plastic strain range of TS-TS curves. Fracture strain ?_f data were well correlated as ?_f + ?₀ = const. where ?₀ is the pre-strain representing the irradiation hardening.Based on those formulations and available experimental information, several critical issues to be dealt with in developing the concept were identified possible reduction in ductility, significant change in mechanical properties, remarkable cyclic softening and other unique cyclic properties observed during a high-cycle fatigue testing, and the redundancy of the plastic collapse concept to bending. Existing structural codes are all based on the assumption that there will be no significant changes in mechanical properties during operation, and of high ductility. Therefore, a new concept for assuring structural integrity is required for application not only to components with high ductility but also components with reduced ductility. First, potential failure modes were identified, and a new and systematic concept was proposed for preventing these modes of failure, introducing a new concept of categorizing the loadings by stability of deformation process to fracture (as type F and M loadings). Based on the basic concept, a detailed concept of how to protect against ductile fracture was given, and loading type-dependent limiting parameters were set.Finally, application of the detailed concept was presented, especially on determination of loading type (in numerical approach, the formulation of TS-TS curves and fracture strain derived above are needed), and on how to determine the limiting parameters as allowable limits. Experiments were done to identify the loading type of a tensile loading acting on a structure with a discontinuity. Tensile loadings acting on an intensely neutron-irradiated flat plate with a hole in the center cause plastic tensile instability and necking at the minimum ligament section but do not initiate any surface crack at the initiation of necking.