Influence of heat-stable filler on the thermal shielding performance of water-based intumescent fire-resistive coating for structural steel applications

Intumescent coatings are the newest passive fireproofing materials which maintain structural integrity of high-rise buildings in fire events. The present work focuses on the influence of zirconium silicate as a heat-stable filler in intumescent coatings. Different coatings were formulated by varying the zirconium silicate concentration from 1, 3, 5, 8, and 10 on parts per hundred basis (phr). Fire performance of the coatings was then determined by fire test using a Bunsen burner fire flame at 950°C for 1 h. The degradation of coatings was examined by thermogravimetric analysis (TGA). The morphology of the intumescent chars was analyzed by environmental scanning electron microscopy. The char was also examined by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy. XRD confirmed the inertness of zirconium silicate with intumescent ingredients at high temperatures. TGA showed an increase in the weight residue of char at high temperature. The incorporation of zirconium silicate into intumescent coating forms a thermally stable char with better substrate adhesion. EDS analysis confirmed an increase in the antioxidation property of the char, and the fire test also confirmed an increase in char strength of coatings by the incorporation of zirconium silicate.     

Rapid enumeration of water bacteria

The research reported in this paper is devoted towards the development of a rapid bacteriological test for water. The proposed technique consists in measuring “Cold T.C.A. insoluble portion” of metabolized phosphorus in multiplying bacterial cells with recourse to radioactive phosphorus-32 as a tracer and enumerates bacteria in 1 h incubation time. A linear correlation (coefficient of correlation = +0·989) has been shown to exist between this portion of phosphorus and cell population for bacterial species of public-health significance, thereby providing a point d'appui for this approach of enumerating water bacteria.The data reported in the paper reveal a promise for the differential enumeration of Grams positive and negative cells by incorporating suitable chemical inhibitors in appropriate concentrations in the test portions for rapid test.The technique has been exhibited to be applicable to field samples drawn from surface and underground sources of water. Its reproducibility and economics are comparable with “Standard Method” procedures.     

Direct alloreactivity by human cytotoxic T lymphocytes can Be inhibited by altered peptide ligand antagonism

Alloreactive T lymphocytes that respond directly to foreign major histocompatibility complex (MHC) molecules and bound peptide are known to be central mediators of graft-versus-host disease (GVHD) and allograft rejection. We have recently identified a peptide from the human protein, cytochrome P450 (isotypes IIC9, 10, or 18), that is recognized in association with human leukocyte antigen (HLA) B*3501 by alloreactive cytotoxic T lymphocytes (CTLs). These CTLs with this specificity were isolated from several unrelated individuals and were found to express a common T-cell receptor (TCR). Synthetic analogs of the cytochrome P450 peptide were generated by introducing single amino acid substitutions at putative TCR contact positions. Four altered peptide ligands were powerful competitive antagonists of these CTL clones, reducing lysis levels of target cells expressing the alloantigen HLA B*3501 by over 80%. This first demonstration that it is possible to suppress CTL alloreactivity with structural variants of allodeterminants raises the prospect that such TCR antagonists could be exploited within the clinical arena to specifically modulate GVHD and allograft rejection.     

Secondary electron imaging in the variable pressure scanning electron microscope

Secondary electron imaging is not possible in the variable pressure scanning electron microscope because the mean free path of the secondaries in the gas is too short to permit them to reach the detector. This paper therefore investigates an alternative strategy for producing an image containing significant amounts of secondary electron contrast. This involves modifying the microscope by the addition of a biased electrode above the sample and then collecting a specimen current signal. This system, originally described by Farley and Shah (1988), is found to produce true secondary electron detail over a wide range of conditions.     

Fixed bed and reduced lumped diffusion model parameter estimation of copper biosorption using Aspergillus niger biomass

In this study, fixed bed model and reduced lumped diffusion model were used to explain biosorption behaviour of Cu (II) in a continuous column of Aspergillus niger biomass. The breakthrough time was evaluated for both models as a function of influent flow rate and bed height for a feed solution at 10 mg/L metal ion concentration and compared with experimental results. MATLAB was used to solve the partial differential equations and breakthrough curve was plotted. The breakthrough time obtained experimentally was comparable with data evaluated by these models. It was observed that fixed bed model and reduced lumped diffusion model can predict column dynamics more accurately at high flow rate, that is, at 9.8 mL/min for all (2.1, 3.1, and 4.1 cm) bed heights. © 2011 Canadian Society for Chemical Engineering     

Single Step Synthesis of Nitro‐Functionalized Hydroxyl‐Terminated Polybutadiene

The paper reports the energization of Hydroxyl‐Terminated Polybutadiene (HTPB) by functionalizing explosophore  NO₂ over the HTPB backbone, resulting in the formation of conjugated nitro‐alkene derivative of HTPB. A convenient, inexpensive and efficient “one pot” procedure of synthesizing Nitro‐Functionalized Hydroxyl‐Terminated Polybutadiene (Nitro‐HTPB) is reported. The reaction was carried out with sodium nitrite and iodine. To retain the unique physico‐chemical properties of HTPB, functionalization by  NO₂ group was restricted to 10 to 15 % of double bonds. The Nitro‐HTPB was characterized by FTIR, ¹H NMR, VPO, DSC, TGA etc. The polymer has shown good thermal stability for practical applications. The kinetic parameters for the decomposition of Nitro‐HTPB at 150–300 °C were obtained from non‐isothermal DSC data.     

Surveillance of the quality of turmeric powders from city markets of India on the basis of curcumin content and the presence of extraneous colours

Curcumin, the principal curcuminoid of turmeric, is responsible for its yellow colour and serves as a measure of turmeric quality. The Prevention of Food Adulteration (PFA) Act of India allows only Curcuma longa L. for the production of turmeric powder and prohibits addition of any foreign matter/artificial colour, but it does not specify a minimum curcumin content. The present surveillance was undertaken to study the quality of loose versus branded turmeric powders vis-à-vis curcumin content and the presence of unwarranted extraneous colours from city markets in India using a newly developed two-dimensional high-performance thin-layer chromatography (2D-HPTLC) method. The results show that curcumin content in branded samples ranged from 2.2% to 3.7%, while non-branded samples had from 0.3% to 2.6%. Though none of the branded turmeric powders contained artificial colours, 17% of loose powders showed the presence of extraneous colour metanil yellow, in the range 1.0–8.5 mg g^?1, which may pose health threats. Low curcumin content in the analysed samples may be due to mixing of other curcuma species or their curcumin-depleted matrices and foreign starches as cheaper alternatives. This is supported by the fact that major Indian turmeric trade types are known to possess curcumin contents ranging from 2.1% to 8.6%, with an average of 4.8%. There is thus an urgent need to prescribe realistic curcumin limits for turmeric powder, otherwise there is no obligation on the part of traders to stick to any minimum levels and consumers will keep on getting this nutrient-depleted household spice.     

Analysis of LDPC with optimum combining

Low density parity check (LDPC) codes have shown exceptionally good performance for single antenna systems over a wide class of channels. LDPC when implemented with a single input multiple output system with maximum ratio combining is optimum from the standpoint of maximising signal-to-noise ratio at combiner output without the presence of interferer. Optimum combining outperforms maximal ratio combining (MRC) in the presence of interferer(s). In this article, the performance of the LDPC codes with multiple receiver antennas with optimum combining in the presence of single interferer is investigated. The simulation results showed that LDPC codes of irregular construction are able to give high coding and diversity gain with optimum combining. The proposed LDPC optimum combined (LDPC–OC) system in Rayleigh fading channel in the presence of a single interferer improves the signal to interferer plus noise ratio by 2.62 dB with four receiver antennas and by 1.98 dB when the number of receiver antennas is three.     

New developments in the melt rheology of nylons. I: Effect of moisture and molecular weight

Peculiar observations on the melt rheology of ultra-dry nylon resins, nylon 6 in particular, are reported. One aspect of this study deals with a sharp increase in zero shear melt viscosity (e.g. 2 to 5 times) as the nylon 6 resin moisture is taken from 0.10 down to 0.00%; the effect being reversible. Changes of such magnitude are unexpected considering that there are no detectable variations of the chemical/compositional/molecular weight type in the starting resin, when subjected to the imposed drying conditions. Another aspect of this study deals with a deviation of nylons (6, 6,6, and 12) from the Bueche (1952) relationship, well accepted for polymers to date. Under moderate drying conditions (e.g. 50°C/17 h/110 millitorr), the molecular weight exponent is found to be 3.8, which is within the range of 3.4 to 3.8 reported for nylon 6. However, under more severe drying conditions (e.g. 110°C/17 h/110 millitorr), the molecular weight exponents for nylon 6, nylon 66, and nylon 12 are 4.8, 5.4, and 4.6, respectively. We are proposing that a sharp increase in melt viscosity of ultra-dry nylon 6 is partly due to an increase in the molecular weight of the melt (extrudate) which then, has a more pronounced impact on melt viscosity in view of the 4.8 exponent. Such unique results, in contrast to polyethylene (free radical polymer) and poly(ethylene terephthalate) (condensation polymer) are tentatively attributed to H-bonding in nylon melts. Yet another aspect of this study deals with the rheology of supercooled molten polymers that can offer advantages for analytical characterization.     

Numerical simulation and modelling of a novel MEMS capacitive accelerometer based microphone for fully implantable hearing aid

Microsystem Technologies - The present work proposes a novel MEMS capacitive accelerometer based microphone with enhanced sensitivity. The accelerometer design is simulated in COMSOL MULTIPHYSICS...