Formation of a protective layer against corrosion on Mg alloy via alkali pretreatment followed by vanillic acid treatment

Although Mg alloy possesses high specific strength, low density, and good biocompatibility, poor corrosion resistance hinders its further applications. In the present study, an innovative protective layer against corrosion was prepared on the AZ31 Mg alloy via alkali pretreatment followed by vanillic acid treatment. The alkali pretreatment supplied –OH for the AZ31 Mg alloy surface to react with vanillic acid. The vanillic acid treatment played a crucial role in enhancing the corrosion resistance due to the excellent ability to act as a barrier and retard aqueous solution penetration, which effectively isolated the underlying Mg alloy from the corrosive environment. The corrosion current density of alkali and vanillic acid-treated Mg alloy (AZ31V) almost showed two orders of magnitude lower values in comparison with that of the AZ31 Mg alloy, and the corrosion potential of AZ31V Mg alloy increased from −1.41 to −1.25 V. The immersion tests proved that there was no occurrence of severe corrosion. Hence, the alkali pretreatment and vanillic acid treatment may represent a promising method to improve the corrosion resistance of Mg alloy.     

制导炸弹半实物仿真系统误差对仿真结果的影响

在制导炸弹半实物仿真试验中经常发现,同一发制导炸弹多次仿真的俯仰角差别较大,同一批次制导炸弹投弹试验的遥测俯仰角与仿真俯仰角差别也较大,但是俯仰角的收敛趋势均一致,实测脱靶量与仿真脱靶量都合格,且具有一致性。为了分析出现上述现象的原因,基于协方差分析描述函数法(CADFT),建立了制导炸弹半实物仿真系统的误差传播理论,计算了仿真姿态角和姿态角速度的误差。分析了仿真姿态角和姿态角速度的误差对仿真结果的影响。结果表明,在仿真系统各种误差中,气动力和气动力矩误差是主要误差,是引起仿真俯仰角差别的重要原因; 姿态角的动态验模方法不适用于制导炸弹仿真模型,而脱靶量的静态验模方法适用于制导炸弹仿真模型。     

Computational Fluid Dynamics Study on a Top-Blown Smelting Process with Lance Failure in an Isa Furnace

JOM - The Isa/Ausmelt smelting technology with a top submerged lance (TSL) has been extensively used in copper smelting processes. However, the TSL is extremely vulnerable to damage and failure...     

Owner’s Risk Allocation and Contractor’s Role Behavior in a Project: A Parallel-mediation Model

Risk allocation decisions are of critical importance in project management. The present study proposes an explanation for how risk allocation in a contract motivates a contractor to cooperate with a project owner. Theories of risk allocation and trust were used to motivate the research. Using a survey methodology, we collected data concerning 124 construction projects in China. We found that risk allocation influenced the contractor’s role behavior through the contractor’s feeling of being trusted but not the contractor’s trust in the owner. Feeling of being trusted partially mediated the effect of risk allocation on the contractor’s in-role (i.e., contractual) behavior and fully mediated the effect on extra-role behavior. The study introduces a social and psychological view of the impacts of risk allocation to the project and engineering management literature. We contribute to theory by arguing and demonstrating the mediating effect of trust on the relationship between risk allocation and contractor behavior. From a practical standpoint, we conclude that contractual risk allocation has a significant impact on building a trusting relationship between owners and contractors and that contractors who feel trusted perform both contractually mandated actions and actions external to the contract more diligently, resulting in the likelihood of improved outcomes for both parties.     

埋地管道在冻土带的热力变形分析

埋地油气管道通过永冻土地带时,由于管内介质与周围的冻土发生了热力作用,使冰土解冻,在管道周围形成融化圈。文章分析了永冻土的特点,建立了永冻土地带土壤传热数学模型:融化圈内外传热方程、管道向土壤和土壤表面向大气所放热量的守恒关系、融化圈界面处土壤温度、相变界面处固相变为液相的传热条件。还建立了埋地管道模型,并以穿过永冻土地带土壤的输油管道为例,分析并计算了各种应力的最大值所在的位置和大小,提出了在永冻土地带减小管道热力变形的措施。     

Colloidal Synthesis of Hollow Cobalt Sulfide Nanocrystals

Formation of cobalt sulfide hollow nanocrystals through a mechanism similar to the Kirkendall Effect has been investigated in detail. It is found that performing the reaction at > 120 °C leads to fast formation of a single void inside each shell, whereas at room temperature multiple voids are formed within each shell, which can be attributed to strongly temperature‐dependent diffusivities for vacancies. The void formation process is dominated by outward diffusion of cobalt cations; still, the occurrence of significant inward transport of sulfur anions can be inferred as the final voids are smaller in diameter than the original cobalt nanocrystals. Comparison of volume distributions for initial and final nanostructures indicates excess apparent volume in shells, implying significant porosity and/or a defective structure. Indirect evidence for fracture of shells during growth at lower temperatures was observed in shell‐size statistics and transmission electron microscopy images of as‐grown shells. An idealized model of the diffusional process imposes two minimal requirements on material parameters for shell growth to be obtainable within a specific synthetic system.     

基于进化策略的BP神经网络匹配算法研究

研究了利用BP神经网络理论进行景象匹配的方法,将灰度不变矩和边缘不变矩同时作为匹配特征应用于BP神经网络景象匹配中,并对经典的进化策略进行改进,提出并实现了一种高效的基于进化策略的BP神经网络景象匹配算法.实验结果证明了算法寻优的全局性和精确性.     

Fenton试剂降低采油污水CODCr的研究与应用

针对辽河油区超稠油采油污水的特点，采用Fenton试剂催化氧化，对采油污水处理进行研究。实验研究及现场应用结果表明，此方法对污水的CODCr具有良好的去除效果。处理后污水经过简单生化，进一步降解污染物，能够实现稳定迭标排放，且具有能耗低、运行成本低和操作简单等特点。     

气动贯通式潜孔锤反循环连续取心取样钻进新技术在河南钼矿中应用

三道庄钼矿勘探生产中钻遇的地层非常复杂，采用其他方法均无法实现钻进，经过分析比较，决定采用贯通式潜孔锤反循环连续取心（样）钻进新技术来解决该地层钻进难、成孔难、取样难等三大问题。文章从钻进技术特点、工作原理等方面对该技术进行详细分析，得出其具有钻进效率高、岩心（样）采取率高、成孔质量好等突出优点。并介绍了钻进主要设备机具的配套、施工工序、操作要点、遇到问题的解决方法等。在河南钼矿露天采石场应用该项技术，有效避免了塌孔和卡钻事故，工程进展顺利、质量好、岩心（样）采取率在98％以上，取得了良好的效果。针对在生产试验中遇到的某些问题，作者提出了一些改进建议。     

动感像素全息母版图案的设计制作研究

本文介绍了一种新颖的数码像素全息高速拍摄装置来实现全息母版的制作。提出和介绍了运用Photoshop软件一些特殊的图像处理功能设计制作动感像素全息图的方法,并结合多种防伪技术,使产生的图案具有不可仿制的图形畸变特点,并列举了设计实例。