Theory of soliton stability in asynchronous modelocking

A new type of fiber laser modelocking is examined where a phase modulator is driven asynchronously with respect to a harmonic of the roundtrip cavity frequency. An asynchronous drive is able to produce high repetition rate (>1 GHz) soliton pulses that are shorter than the classic, active modelocking pulse width limit. It is shown that with a proper choice of fiber parameters, noise cleanup and soliton pulse shaping can be obtained using filtering and asynchronous phase modulation. Limits of asynchronous detuning are derived and a comparison with the parameters ranges for synchronous phase modulation is also presented     

As,Sb,Sn对30CrMnSiA钢力学性能的影响

在３０ＣｒＭｎＳｉＡ钢中加入不同量的Ａｓ，Ｓｂ，Ｓｎ元素，研究了这些元素单独存在及复合存在时对钢的强度，塑性，冲击韧度及韧脆转变温度的影响规律，并用扫描电镜及俄歇能谱分析了Ａｓ，Ｓｂ，Ｓｎ导致晶界脆化的机理。     

Diagnosis and treatment of iatrogenic ureteral injury

Diagnosis and treatment of 17 patients who sustained 20 iatrogenic ureteral injuries were analyzed. Primary operations in which ureteral injury occurred are almost gynecologic procedures and general surgery. Injuries were managed by ureteroureterostomy in four, ureteral stent in one, removal suture ligation and ureteral double J-catheter in one, ureteroneocystostomy in ten, psoas-hitch technique and ureteroneocystostomy in one, nephrectomy in two. All patients with appropriate repair were followed-up periods of three to five years. Renal function of these patients had optimal results. When ureteral injury occurs, B-US, IVU, cystoscopy, retrograde ureterography or infusion of dye may be useful. An appropriate repair should be chosen according to length and position of ureteral injuries. Reoperation was optimal in two to three weeks. Immediate recognition of accidental ureteral injury provides optimal results. Patients with unrecognized injuries had suboptimal results.     

Probability-confidence-kernel-based localized multiple kernel learning with lp norm

Localized multiple kernel learning (LMKL) is an attractive strategy for combining multiple heterogeneous features in terms of their discriminative power for each individual sample. However, models excessively fitting to a specific sample would obstacle the extension to unseen data, while a more general form is often insufficient for diverse locality characterization. Hence, both learning sample-specific local models for each training datum and extending the learned models to unseen test data should be equally addressed in designing LMKL algorithm. In this paper, for an integrative solution, we propose a probability confidence kernel (PCK), which measures per-sample similarity with respect to probabilistic-prediction-based class attribute: The class attribute similarity complements the spatial-similarity-based base kernels for more reasonable locality characterization, and the predefined form of involved class probability density function facilitates the extension to the whole input space and ensures its statistical meaning. Incorporating PCK into support-vectormachine-based LMKL framework, we propose a new PCK-LMKL with arbitrary l(p)-norm constraint implied in the definition of PCKs, where both the parameters in PCK and the final classifier can be efficiently optimized in a joint manner. Evaluations of PCK-LMKL on both benchmark machine learning data sets (ten University of California Irvine (UCI) data sets) and challenging computer vision data sets (15-scene data set and Caltech-101 data set) have shown to achieve state-of-the-art performances.     

An Analytical Model Including Interface Traps and Temperature Effects in Negative Capacitance Double Gate Field Effect Transistor

Silicon - In this paper, an analytical model for negative capacitance double gate field effect transistor (NC-DG-FET) is proposed. This model includes interface traps and temperature effects, which...     

Effect of surface free energy on the adhesion of biofouling and crystalline fouling

Pipelines and heat exchangers using seawater as coolant suffer from biofouling. Biofouling not only reduces heat transfer performance significantly, but also causes considerable pressure drop, calling for higher pumping requirements. It would be much more desirable if surfaces with an inherently lower stickability for biofouling could be developed. In this paper, a cost-effective autocatalytic graded Ni-Cu-P-PTFE composite coating with corrosion-resistant properties was applied to reduce biofouling formation. The experimental results showed that the surface free energy of the Ni-Cu-P-PTFE coatings, which were altered by changing the PTFE content in the coatings, had a significant influence on the adhesion of microbial and mineral deposits. The Ni-Cu-P-PTFE coatings with defined surface free energy reduced the adhesion of these deposits significantly. The anti-bacterial mechanism of the composite coatings was explained with the extended DLVO theory.     

无芯胶管的研制、工艺现状和发展建议

20世纪60年代初,我国胶管领域自主开发创新研制了无芯胶管制造技术,并且形成定型技术,一直沿用至今,笔者参与、见证了该产品从试验到投产的全过程。本文对该产品的工艺进行了新旧对比,提出了今后发展的建议。     

二次盐水精制采用5台树脂塔流程简介

介绍了国内首创的离子膜盐水二次精制塔工艺,运行6 a证明本工艺是投资省、见 效快,生产能力大,又切实可行的工艺方法。     

Catalytic activities and properties of mesoporous sulfated Al2O3–ZrO2

Mesoporous sulfated Al₂O₃–ZrO₂ (MSAZ) catalysts with large surface areas and pore volumes after calcination at high temperature (650 °C) and with higher Al₂O₃ content than 20wt% were successfully prepared from a template of block copolymer (P84). The MSAZ catalysts were characterized by X-ray diffraction (XRD), N₂ adsorption, transmission electron microscopy (TEM), ²⁷Al magic-angle spinning nuclear magnetic resonance (MAS NMR), thermogravimetric analysis (TG–DTG), temperature-programmed desorption of ammonia (NH₃-TPD) and infrared spectra (IR) of adsorbed pyridine. It is shown that the resulting mesostructured sulfated Al₂O₃–ZrO₂ samples have a well-developed textural mesoporosity. The number of acid sites present on MSAZ catalysts is higher than that on conventional sulfated zirconia, and the former catalysts are more active than the latter one for various acid-catalyzed reactions.     

以显微荧光检验法检测常用盖印材料

显微荧光检验法是显微检验的一个重要角度,由于缺少基础性研究,这一方法在文件检验中的运用并不广泛.着重考虑曝光时间这一因素,以盖印材料的荧光特性为观察角度,运用显微荧光检验法对大量常用盖印材料进行系统、全面的观察和研究.研究表明,绝大部分盖印材料可被激发出荧光,每种盖印材料的荧光特性都有各自的规律性特点.