Selective potentiometric determination of uric acid with uricase immobilized on ZnO nanowires

In this study, a potentiometric uric acid biosensor was fabricated by immobilization of uricase onto zinc oxide (ZnO) nanowires. Zinc oxide nanowires with 80-150 nm in diameter and 900 nm to 1.5 μm in lengths were grown on the surface of a gold coated flexible plastic substrate. Uricase was electrostatically immobilized on the surface of well aligned ZnO nanowires resulting in a sensitive, selective, stable and reproducible uric acid biosensor. The potentiometric response of the ZnO sensor vs Ag/AgCl reference electrode was found to be linear over a relatively wide logarithmic concentration range (1-650 μM) suitable for human blood serum. By applying a Nafion^® membrane on the sensor the linear range could be extended to 1-1000 μM at the expense of an increased response time from 6.25 s to less than 9 s. On the other hand the membrane increased the sensor durability considerably. The sensor response was unaffected by normal concentrations of common interferents such as ascorbic acid, glucose, and urea.     

Selective determination of urea using urease immobilized on ZnO nanowires

Well-aligned zinc oxide (ZnO) nanowire arrays were fabricated on gold-coated plastic substrates using a low-temperature aqueous chemical growth (ACG) method. The ZnO nanowire arrays with 50–130 nm diameters and ∼1 μm in lengths were used in an enzyme-based urea sensor through immobilization of the enzyme urease that was found to be sensitive to urea concentrations from 0.1 mM to 100 mM. Two linear sensitivity regions were observed when the electrochemical responses (EMF) of the sensors were plotted vs. the logarithmic concentration range of urea from 0.1 mM to 100 mM. The proposed sensor showed a sensitivity of 52.8 mV/decade for 0.1–40 mM urea and a fast response time less than 4 s was achieved with good selectivity, reproducibility and negligible response to common interferents such as ascorbic acid and uric acid, glucose, K⁺ and Na⁺ ions.     

Analyzing CAD competence with univariate and multivariate learning curve models

Understanding how learning occurs, and what improves or impedes the learning process is of importance to academicians and practitioners; however, empirical research on validating learning curves is sparse. This paper contributes to this line of research by collecting and analyzing CAD (computer-aided design) procedural and cognitive performance data for novice trainees during 16-weeks of training. The declarative performance is measured by time, and the procedural performance by the number of features used to construct a design part. These data were analyzed using declarative or procedural performance separately as predictors (univariate), or a combination of declarative or procedural predictors (multivariate). Furthermore, a method to separate the declarative and procedural components from learning curve data is suggested.     

Efficient single-pass frequent pattern mining using a prefix-tree

The FP-growth algorithm using the FP-tree has been widely studied for frequent pattern mining because it can dramatically improve performance compared to the candidate generation-and-test paradigm of Apriori. However, it still requires two database scans, which are not consistent with efficient data stream processing. In this paper, we present a novel tree structure, called CP-tree (compact pattern tree), that captures database information with one scan (insertion phase) and provides the same mining performance as the FP-growth method (restructuring phase). The CP-tree introduces the concept of dynamic tree restructuring to produce a highly compact frequency-descending tree structure at runtime. An efficient tree restructuring method, called the branch sorting method, that restructures a prefix-tree branch-by-branch, is also proposed in this paper. Moreover, the CP-tree provides full functionality for interactive and incremental mining. Extensive experimental results show that the CP-tree is efficient for frequent pattern mining, interactive, and incremental mining with a single database scan.     

Numerical study of asymmetric laminar flow of micropolar fluids in a porous channel

A numerical study is presented for the two-dimensional flow of a micropolar fluid in a porous channel. The channel walls are of different permeability. The fluid motion is superimposed by the large injection at the two walls and is assumed to be steady, laminar and incompressible. The micropolar model due to Eringen is used to describe the working fluid. The governing equations of motion are reduced to a set of non-linear coupled ordinary differential equations (ODEs) in dimensionless form by using an extension of Berman’s similarity transformations. A numerical algorithm based on finite difference discretization is employed to solve these ODEs. The results obtained are further improved by Richardson’s extrapolation for higher order accuracy. Comparisons with the previously published work are performed and are found to be in a good agreement. It has been observed that the velocity and microrotation profiles change from the most asymmetric shape to the symmetric shape across the channel as the parameter R or the permeability parameter A are varied between their extreme values. The results indicate that larger the injection velocity at a wall relative to the other is, smaller will be the shear stress at it than that at the other. The position of viscous layer has been found to be more sensitive to the permeability parameter A than to the parameter R. The micropolar fluids reduce shear stress and increase couple stress at the walls as compared to the Newtonian fluids.     

Dynamic hybrid automatic repeat request (DHARQ) for WiMAX – Mobile multihop relay using adaptive power control

Wireless multihop network is currently attracting much attention as a new wireless broadband access technology due to numerous benefits. This work proposes a power control scheme for WiMAX multihop relay system. In contrast to existing power control and optimization approaches, our proposed method uses an adaptive Channel Quality Measurement for a relay station to reduce interferences to other mobile station (MS) or relay station (RS) within the same cell and hence increase the number of hops per link and consequently maximize the spatial reuse. The proposed power control is applied to a new dynamic HARQ algorithm for adaptive channel quality enhancement. Simulation results have indicated that the proposed approach achieves superior BER/PER performance enhancement in comparison to previous related works.     

On partial-information optimal singular control problem for mean-field stochastic differential equations driven by Teugels martingales measures

This paper is concerned with partial-information mixed optimal stochastic continuous–singular control problem for mean-field stochastic differential equation driven by Teugels martingales and an independent Brownian motion, where the Teugels martingales are a family of pairwise strongly orthonormal martingales associated with Lévy processes. The control variable has two components; the first being absolutely continuous, and the second singular. Partial-information necessary and sufficient conditions of optimal continuous–singular control for these mean-field models are investigated. As an illustration, this paper studies a partial-information linear quadratic control problem of mean-field type involving continuous–singular control.     

H∞ state estimation of generalised neural networks with interval time-varying delays

This paper focuses on studying the H_∞ state estimation of generalised neural networks with interval time-varying delays. The integral terms in the time derivative of the Lyapunov–Krasovskii functional are handled by the Jensen’s inequality, reciprocally convex combination approach and a new Wirtinger-based double integral inequality. A delay-dependent criterion is derived under which the estimation error system is globally asymptotically stable with H_∞ performance. The proposed conditions are represented by linear matrix inequalities. Optimal H_∞ norm bounds are obtained easily by solving convex problems in terms of linear matrix inequalities. The advantage of employing the proposed inequalities is illustrated by numerical examples.     

Application of several non-linear prediction tools for estimating uniaxial compressive strength of granitic rocks and comparison of their performances

Uniaxial compressive strength (UCS) of rock is crucial for any type of projects constructed in/on rock mass. The test that is conducted to measure the UCS of rock is expensive, time consuming and having sample restriction. For this reason, the UCS of rock may be estimated using simple rock tests such as point load index (I _s(50)), Schmidt hammer (R _n) and p-wave velocity (V _p) tests. To estimate the UCS of granitic rock as a function of relevant rock properties like R _n, p-wave and I _s(50), the rock cores were collected from the face of the Pahang–Selangor fresh water tunnel in Malaysia. Afterwards, 124 samples are prepared and tested in accordance with relevant standards and the dataset is obtained. Further an established dataset is used for estimating the UCS of rock via three-nonlinear prediction tools, namely non-linear multiple regression (NLMR), artificial neural network (ANN) and adaptive neuro-fuzzy inference system (ANFIS). After conducting the mentioned models, considering several performance indices including coefficient of determination (R ²), variance account for and root mean squared error and also using simple ranking procedure, the models were examined and the best prediction model was selected. It is concluded that the R ² equal to 0.951 for testing dataset suggests the superiority of the ANFIS model, while these values are 0.651 and 0.886 for NLMR and ANN techniques, respectively. The results pointed out that the ANFIS model can be used for predicting UCS of rocks with higher capacity in comparison with others. However, the developed model may be useful at a preliminary stage of design; it should be used with caution and only for the specified rock types.     

A New Fast Backup Method for Bidirectional Multicast Traffic in MPLS Networks: Control Plane Procedures and Evaluation by Simulations

Bidirectional multicast mechanisms are used to support multi-point to multi-point (MP2MP) traffic such as video-conferencing. These mechanisms are deployed today in multi-protocol label switching (MPLS) networks using the connectionless mode in which traffic engineering (TE) features such as bandwidth reservation and fast reroute in case of link and/or node failure are not defined. Indeed, TE procedures are defined in MPLS for unicast and multicast point-to-multipoint (P2MP) traffic only. Hence, MP2MP traffic that requires TE procedures is carried out using a full mesh of P2P or P2MP paths. Similarly, a full mesh of P2P and P2MP backup paths should be predefined in order to fast reroute traffic in case of a node failure. This leads to a major scalability problem since MPLS TE paths incur heavy overhead burden on MPLS nodes (CPU and memory). In this paper, we emphasize on fast reroute procedures using MP2MP TE paths. In particular, we define the control plane procedures that should be established. In addition, we present a simulation study that demonstrates the scalability amelioration when using MP2MP TE paths for fast rerouting instead of full mesh P2P and/or P2MP paths.