The transient-state,multiple-species biofilm model for biofiltration processes

We describe the transient-state, multiple-species biofilm model (TSMSBM), which is a novel synthesis of key modeling features needed to describe multiple-species biofilms that experience time-varying conditions, particularly including periodic detachment by backwashing. The TSMSBM includes six features that are essential for describing multiple-species biofilms that undergo changes over time: (1) four biomass types: heterotrophs, ammonia oxidizers, nitrite oxidizers, and inert biomass; (2) seven chemical species: input biodegradable organic material (BOM), NH4(+)-N, NO2(-)-N, NO3(-)-N, utilization-associated products, biomass-associated products, and dissolved oxygen; (3) eight reactions that describe the rates of consumption or production of the different species, as well as the stoichiometric linkages among the rates; (4) reaction with diffusion of all the soluble species in the biofilm; (5) growth, decay, detachment, and flux of each biomass type by location in the biofilm; and (6) constant or periodic detachment of biofilm, both of which allow for protection of biomass deep inside the biofilm. The last two features of the TSMSBM provide novel additions to biofilm modeling, and the synthesis of all features is a unique advancement. A series of examples illustrates insights that the TSMSBM can provide about the transient development of multiple-species biofilms; the roles of soluble microbial products and detachment in controlling the distribution of biomass types and process performance; and how backwashing affects the biofilm in drinking-water biofiltration.     

Standardized evaluation of chemical compositions of LiTaO3 single crystals for SAW devices using the LFB ultrasonic material characterization system

The line-focus-beam ultrasonic material characterization (LIFB-UMC) system is applied to compare and evaluate tolerances provided independently for the Curie temperature T/sub C/ and lattice constant /spl alpha/ to evaluate commercial LiTaO/sub 3/ single crystals by measuring the Rayleigh-type leaky surface acoustic wave (LSAW) velocities V/sub LSAW/. The relationships between VLSAW, and T/sub C/ and /spl alpha/ measured by individual manufacturers were obtained experimentally using 42/spl deg/YX-LiTaO/sub 3/ wafers as specimens from three crystal manufacturers. In addition, the relationship between VLSAW and SH-type SAW velocities V/sub SAW/ that are actually used for the SAW device wafers was obtained through calculations, using the chemical composition dependences of the acoustical physical constants for LiTaO/sub 3/ crystals reported previously. The result of a comparison between the T/sub C/ tolerance of /spl plusmn/3/spl deg/C and the /spl alpha/ tolerance of /spl plusmn/0.00002 nm through the common scale of VLSAW or VSAW demonstrated that the /spl alpha/ tolerance is 1.6 times larger than the T/sub C/ tolerance. Furthermore, we performed a standardized comparison of statistical data of T/sub C/ and /spl alpha/ for LiTaO/sub 3/ crystals grown by two manufacturers during 1999 and 2000, using VLSAW. The results clarified the differences of the average chemical compositions and of the chemical composition distributions among the crystal ingots between the two manufacturers. A guideline for the standardized evaluation procedure has been established for the SAW-device wafer specifications by the LFB-UMC system.     

Proportional hazards models with random effects to examine centre effects in multicentre cancer clinical trials

In randomized clinical trials comparing treatment effects on diseases such as cancer, a multicentre trial is usually conducted to accrue the required number of patients within a reasonable period of time. The fundamental point of conducting a multicentre trial is that all participating investigators must agree to follow the common study protocol. However, even with every attempt having been made to standardize the methods for diagnosing severity of disease and evaluating response to treatment, for example, they might be applied differently at different centres, and these may vary from comprehensive cancer centres to university hospitals to community hospitals. Therefore, in multicentre trials there is likely to be some degree of variation (heterogeneity) among centres in both the baseline risks and the treatment effects. While we estimate the overall treatment effect using a summary measure such as hazard ratio and usually interpret it as an average treatment effect over the centre, it is necessary to examine the homogeneity of the observed treatment effects across centres, that is, treatment-by-centre interaction. If the data are reasonably consistent with homogeneity of the observed treatment effects across centres, a single summary measure is adequate to describe the trial results and those results will contribute to the scientific generalization, the process of synthesizing knowledge from observations. On the other hand, if heterogeneity of treatment effects is found, we should carefully interpret the trial results and investigate the reason why the variation is seen. In the analyses of multicentre trials, a random effects approach is often used to model the centre effects. In this article, we focus on the proportional hazards models with random effects to examine centre variation in the treatment effects as well as the baseline risks, and review the parameter estimation procedures, frequentist approach-penalized maximum likelihood method--and Bayesian approach--Gibbs sampling method. We also briefly review the models for bivariate responses. We present a few real data examples from the biometrical literature to highlight the issues.     

Color‐conversion method for a multi‐primary display to reduce power consumption and conversion time

Abstract— A color‐conversion method for a light‐emitting multi‐primary‐color display is proposed. While amulti‐primary‐color display uses four or more primary colors to reproduce a wide color gamut, multiple sets of primary‐color signals are needed to reproduce one color. Therefore, linear programming, which results in low power consumption, was adopted to uniquely determine the set of primary‐color signals. Although a highly accurate color conversion was achieved by using linear programming with low power consumption, it requires a very long time to convert colors of high‐resolution images. Therefore, by categorizing the color conversion of linear programming as a classification problem, colors are converted by using the decision‐tree method, which is a classification method. As a result, color conversion with high accuracy, low power consumption, and short conversion time was achieved.     

Evaluation and selection of LiNbO(3) and LiTaO(3) substrates for SAW devices by the LFB ultrasonic material characterization system

This paper demonstrates the evaluation and selection of commercially available LiNbO(3) and LiTaO(3) single crystals and wafers for surface acoustic wave (SAW) devices using the line-focus-beam ultrasonic material characterization (LFB-UMC) system. This system enables measuring leaky-SAW (LSAW) propagation characteristics precisely and efficiently for a number of specimens. The wafers are prepared from the top, middle, and bottom parts of four 128 degrees YX LiNbO(3) and seven X-112 degrees Y LiTaO(3) single crystals. For both series of crystals, the measured LSAW velocities increase from top to bottom in the crystals and with the increasing crystal growth number. The velocity changes for all wafers are 0.036% for 128 degrees YX LiNbO(3) and 0.035% for X-112 degrees Y LiTaO(3), corresponding to changes of 0.038 mol% and 0.075 mol% in Li(2)O concentration, respectively. Moreover, the inhomogeneity in the first X-112 degrees Y LiTaO(3) single crystal caused by some undesirable wafer fabrication processes can be detected precisely, although it is difficult for the conventional methods to obtain such information.     

Loss factors of mirrors for a gravitational wave antenna

Low-loss mirrors fabricated by ion-beam-sputtering machines for possible application in an interferometric gravitational wave antenna were evaluated by use of Nd:YAG laser light (lambda = 1064 nm) with two distinct measurements: a tabletop experiment that used a short cavity with a small beam with a beam waist of approximately 2w(0) = 0.82 mm, and an optical test that used a 20-m prototypical gravitational-wave detector with a large beam with a beam waist of approximately 2w(0) = 4.4 mm. A multilayer coating comprised 29 layers of SiO(2)/Ta(2)O(5) and one protective coating of SiO(2). The best values obtained as a result of these measurements were 16 ppm (parts in 10(6)) and 30 ppm in total loss, respectively. Also, a two-dimensional loss map generated by use of a small beam successfully revealed the existence of a loss structure within the coating surface. These results imply that a high-reflectance multilayer coating has some inhomogeneities and a loss distribution with a typical scale of a few millimeters and that the total measured losses depend on the beam spot size.     

Scattering property of fluorine-doped silica glasses

The Rayleigh scattering coefficients of fluorine (F) doped silica glasses are investigated experimentally and theoretically. They are measured for F-doped silica glass preforms fabricated by the VAD method. It is clarified that the Rayleigh scattering coefficients of F-doped silica glasses increase with increasing F concentration because the concentration fluctuation increases.<>     

The measurement of hydrogen activities in molten copper using an oxide protonic conductor

We have developed a hydrogen sensor for in situ measurements of hydrogen activities in molten copper. The sensor consists of a concentration cell utilizing a proton conductor, CaZr_0.9In_0.1O_3-δ, as the solid electrolyte. The electromotive force (emf) of the cell was generated by both hydrogen and oxygen activity gradients across the cell in a high-temperature region simulating the fire refining processes of copper. However, accurate hydrogen activity in molten copper could be evaluated from the emf if oxygen activity in molten copper was determined simultaneously by another concentration cell and if the hydrogen and the oxygen activities at the reference electrode were known. The performance of the sensor was studied under various conditions. The observed good response and reliability of the sensor show that it should be a powerful tool for improvement of the fire refining process of the molten copper. Theoretical treatment of the calculation of the emf of the concentration cells using a mixed ionic conductor, i.e., protonic and oxide ionic conductor, as solid electrolytes is also discussed briefly.     

A monoarthritis model in rabbits induced by repeated intra-articular injections of lipopolysaccharide

In recent years, states have increasingly turned to managed care arrangements for financing and delivering health services to Medicaid beneficiaries. In 1996, approximately 40% of all Medicaid recipients were enrolled in some form of managed care. The rapid escalation of managed care in this population has been fueled by states' desire to slow the growth of Medicaid expenditures and by the trend toward managed care enrollment in the private health insurance industry. The effect of managed care on cost containment in the Medicaid program may be limited, however, because 85% to 90% of Medicaid managed care enrollees are women of childbearing age and children, who together account for 69% of Medicaid recipients, but only 26% of program costs. Nonetheless, the increase in managed care enrollment in this population may have a profound impact on health service delivery and health outcomes for U.S. children, approximately 20% of whom received health benefits through the Medicaid program in 1995. In the future, the proportion of Medicaid-eligible children enrolled in managed care will likely increase as a result of recent legislation that relaxed the requirement that states seek federal approval prior to mandating managed care enrollment for Medicaid beneficiaries. More states are relying on fully capitated arrangements as the preferred type of managed care for Medicaid recipients, despite the relative lack of experience many of these plans have in serving this low-income population. Moreover, managed care organizations have few incentives to enroll chronically or disabled children with higher-than-average expected costs. Without mechanisms in place that adequately adjust capitated rates to account for these higher-cost enrollees, managed care organizations may lose money, and children with the greatest health care needs may be underserved. As mandatory managed care enrollment for Medicaid recipients increases nationwide, states should carefully monitor changes in program costs and quality as well as implications for the delivery of pediatric health services and health outcomes.     

Phase transitions of two isomorphous two-dimensional conductors (BEDT-TTF)2ClO4X0.5 (X = C2H3Cl3 and C2H4Cl2)

The metal-semiconductor (or metal-metal) transitions of two isomorphous BEDT-TTF (ET) compleses, (ET)₂ClO₄X_0.5 With an asymmetric X = C₂H₃Cl₃ and a symmetric C₂H₄Cl₂ molecule are investigated. The order-disorder configuration changes of the ethylene groups in ET molecules, in addition to the disorder introduced by the asymmetric structure of the molecule for the former complexes, play an important roles in determining the nature of the transitions.