A novel microfluidic switch for pH control using Chitosan based hydrogels

We report a novel pH-sensitive hydrogel based micro-valve for metered flow that has applications in a laboratory made “Intelligent valving system”. The hydrogel solution was prepared through Chitosan and poly vinyl alcohol in acetic acid and crystallized using gluteraldehyde as the crosslinking agent in the form of thin wafers and it was found to be very sensitive to pH changes. The pore structure of hydrogel was investigated through Field Emission Scanning Electron Microscopy and thin wafers of the gel were physically placed inside PDMS microchannels. Flow metering in these channels was observed by controlled expansion of the hydrogel plug till complete valving was realized. This valving device was further precisely characterized with micro Particle Image Velocimetry using a solution containing fluorescent polymeric micro beads. The principle advantage of this hydrogel device is the smaller range of pH (varying between pH 3 and 7) over which the valving response is observed.     

Influence of Grain Size on Ferroelastic Toughening and Piezoelectric Behavior of Lead Zirconate Titanate

Lead zirconate titanate specimens, at composition Zr_{48.9+- 1.0}/ Ti_51.1+-1.0 of grain sizes ranging from 0.5 to 15 (μm were prepared by hot pressing. The fracture toughness showed a 40% increase in the fine-grained specimens. Poling produced anisotropy in the fracture toughness. A tensor representation for the fracture toughness, now a function of the crack plane normal and the poling direction, is developed. The maximum and minimum values in the toughness tensor are shown to be related to the unpoled toughness by a simple phenomenological relationship. We also find that the piezoelectric coefficient, d₃₃ , shows a slight increase for the fine-grained specimens, which is in conflict with the general view that smaller-grained materials can sustain vanishingly small values of spontaneous polarization.     

Chlorosis in sugarcane: Associated soil properties,leaf mineral composition,and crop response to iron and manganese

Attempts were made to find out the nature and cause of a widespread sugarcane chlorosis in a cane growing area. Soils from chlorotic and nonchlorotic fields did not differ markedly in pH, CaCO₃, electrical conductivity, organic C, and soil test P, Zn, Cu, and Mn levels, but the chlorotic field soils had relatively more NH₄OAc-extractable K and less clay and DTPA-extractable Fe. Chlorotic and green leaf blades contained about the same concentration of P, S, Mg, Fe, Zn, Cu, and Mo, but the former leaf blades had more K and less Ca and HCl soluble Fe than the green ones. Green leaves of plants that seemed to have naturally recovered in chlorotic fields were higher in Mn. A foliage spray with 2.5% FeSO₄.7H₂O solution resulted in greening of leaves and a field experiment showed marked crop response to Fe and some response to Mn. The results thus suggest that the chlorosis is due to a lime-induced Fe-deficiency with the possibility of some role of Mn in Fe nutrition in calcareous soil conditions.Deceased 22 September 1988     

Rheological properties of bitumen in water emulsions with added solids

Experimental work was carried out to investigate the rheological properties of bitumen in water emulsions containing solids of different shape and size. The bitumen volumetric concentration was varied up to 60%, solids free basis, and the solids volume fraction (total volume basis) was varied up to 0.2. Irregular-shaped silica sand (average diameter: 9 and 33 μm) and smooth spherical glass beads (average diameter: 27 and 44 μm) were used as the added solids. In the low shear stress range, shear thinning behavior was observed for bitumen in water emulsions. At high shear stress, the viscosity of the emulsions became fairly independent of the shear stress. The addition of solids to the bitumen emulsions increased the mixture viscosity. The addition of irregular-shaped silica sand gave a higher viscosity than a similar addition of the spherical glass beads. The viscosity of the emulsion/solids mixtures was influenced by the solids size as well; the smaller size particles gave a higher viscosity. The addition of solids to the bitumen emulsions also induced shear thickening (dilatancy) behavior at high solids volume fraction. The degree of the shear thickening increased with the oil concentration.     

A multi-echelon production–inventory system with supply disruption

The article investigates an integrated multi-layer supply chain model consisting of supplier, manufacturer and retailer while supply disruption, machine breakdown, safety stock, maintenance breakdown occur simultaneously. At beginning of the production, manufacturer keeps some raw materials in stock received from second supplier at high price, as safety stock due to supply disruption of first supplier. Corrective maintenance is done immediately to restore its normal stage when machine breakdown occurs. Stock out situations at manufacturer and retailer are considered due to disruption of production for machine breakdown. The integrated expected costs of the chain in centralized (collaborating) and decentralized (Stakelberg approach) system are compared. A numerical example and its sensitivity analysis are provided to test feasibility of the model.     

Three stage trade credit policy in a three-layer supply chain–a production-inventory model

The main purpose of this paper is to investigate the optimal replenishment lot size of supplier and optimal production rate of manufacturer under three levels of trade credit policy for supplier–manufacturer–retailer supply chain. The supplier provides a fixed credit period to settle the accounts to the manufacturer, while the manufacturer gives a fixed credit period to settle the account to the retailer and the retailer, in turn, also offers a credit period to each of its customers to settle the accounts. We assume that the supplier supplies the raw material to the manufacturer and sends back the defective raw materials to the outside supplier after completion of inspection at one lot with a sales price. The system always produces good items in the model. Also, we consider the idle times of supplier and manufacturer. Finally, numerical examples are provided to illustrate the behaviour and application of the model with graphical simulation.     

Rheology of oil in water emulsions with added solids

The effect of added solids on the rheology of oil in water emulsions was investigated. The range of the oil concentration, solids free basis, was (0-70%) and the solids volume fraction was (0-0.16). The solids mean diameter was 45 μm and it was about four times larger than the oil droplets. In the absence of added solids, non-Newtonian behaviour was observed for oil concentrations above 40%. The added solids increased the emulsion viscosity in a manner similar to the addition of solids to a homogeneous fluid. The rheological data of all the emulsion-solids mixtures investigated were correlated as relative viscosity versus solids volume fraction, where the relative viscosity is defined as the ratio of the emulsion-solids mixture viscosity to the solids-free emulsion viscosity. In the case of non-Newtonian systems, the emulsion-solids mixture viscosity and the solids-free emulsion viscosity were calculated at the same shear stress. The Barnea and Mizrahi viscosity correlation was found to fit the data well.     

Dual segment rectangular dielectric resonator antenna with metamaterial for improvement of bandwidth and gain

The simulation and experimental studies of an aperture‐coupled wideband dual segment rectangular dielectric resonator antenna with metamaterial for C‐band applications are presented in this paper. The antenna consists of Alumina (Al₂O₃) ceramic as upper segment and Teflon as lower segment. The combination of circular‐shaped coplanar split‐ring resonator and conducting strip has been used as metamaterial superstrate. With the use of metamaterial superstrate, the bandwidth of the antenna is increased by 48% through simulation and 22% experimentally. The broadside radiation pattern of the antenna is converted into directive radiation pattern with reduced beamwidth when metamaterial superstrate is used. The peak gain of the antenna is also enhanced by 33% through simulation and 31% experimentally with the use of metamaterial superstrate. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:646–655, 2014.     

Influence of Distributed Particle Size on the Determination of the Parabolic Rate Constant for Oxidation by the Powder Method

The established analysis for the study of oxidation using powder specimens is based on the assumption of monosized particles. The experiments, however, are conducted on powders with a distributed particle size. Here we present a statistical approach for the calculation of the rate constant for oxidation. The results of the analysis are applied to new data on oxidation studies of dense powders of silicon carbonitride amorphous ceramics. The monosized model requires a wide range of values for the rate constant to fit the short term and the long-term data, leading to considerable ambiguity in the estimate of the parabolic rate constant, k _p, for oxidation. In contrast the statistical model fits over the entire range of data, yielding a much more reliable value for k _p. For example, the monosized approach gave a value in the range 19.7 × 10⁻¹⁸ < k _p < 2.7 × 10⁻¹⁸ m²/s. In contrast, the statistical model yields a specific value of 4.5 × 10⁻¹⁸ m²/s.     

Mechanical,electrical, and thermal expansion properties of carbon nanotube-based silver and silver-palladium alloy composites

The mechanical, electrical, and thermal expansion properties of carbon nanotube（CNT）-based silver and silver–palladium（10：1, w/w） alloy nanocomposites are reported. To tailor the properties of silver, CNTs were incorporated into a silver matrix by a modified molecular level-mixing process. CNTs interact weakly with silver because of their non-reactive nature and lack of mutual solubility. Therefore, palladium was utilized as an alloying element to improve interfacial adhesion. Comparative microstructural characterizations and property evaluations of the nanocomposites were performed. The structural characterizations revealed that decorated type-CNTs were dispersed, embedded, and anchored into the silver matrix. The experimental results indicated that the modification of the silver and silver–palladium nanocomposite with CNT resulted in increases in the hardness and Young＇s modulus along with concomitant decreases in the electrical conductivity and the coefficient of thermal expansion（CTE）. The hardness and Young＇s modulus of the nanocomposites were increased by 30%？40% whereas the CTE was decreased to 50%-60% of the CTE of silver. The significantly improved CTE and the mechanical properties of the CNT-reinforced silver and silver–palladium nanocomposites are correlated with the intriguing properties of CNTs and with good interfacial adhesion between the CNTs and silver as a result of the fabrication process and the contact action of palladium as an alloying element.