Accounting for the uncertainties in the estimation of average shear wave velocity using V S– N correlations

Site-specific seismic hazard analysis is crucial for designing earthquake resistance structures, particularly in seismically active regions. Shear wave velocity ( V _S) is a key parameter in such analysis, although the economy and other factors restrict its direct field measurement in many cases. Various V _S–SPT– N correlations are routinely incorporated in seismic hazard analysis to estimate the value of V _S. However, many uncertainties question the reliability of these estimated V _S values. This paper comes up with a statistical approach to take care of such uncertainties involved in V _S calculations. The measured SPT– N values from all the critical boreholes were converted into statistical parameters and passed through various correlations to estimate V _S at different depths. The effect of different soil layers in the boreholes on the Vs estimation was also taken into account. Further, the average shear wave velocity of the top 30 m soil cover ( V _S30) is estimated after accounting for various epistemic and aleatoric uncertainties. The scattering nature of the V _S values estimated using different V _S– N correlations was reduced significantly with the application of the methodology. Study results further clearly demonstrated the potential of the approach to eliminate various uncertainties involved in the estimation of V _S30 using general and soil-specific correlations.     

Estimates of pollutant temporal and spatial variability in commercial buildings from the joint urban 2003 field experiments

In this paper, we report on the indoor concentrations from a suite of full-scale outdoor tracer-gas point releases conducted in the downtown area of Oklahoma City in 2003. A point release experiment consisted of releases of sulfur hexafluoride (SF₆) in multiple buildings and from different outdoor locations. From the measurements, we are able to estimate the concentration variations indoors for a building operating under “typical” operating conditions. The mean indoor spatial coefficients of variation are 30% to 45% from a daytime outdoor release are around 80% during an outdoor evening release. Having estimates of the spatial coefficient of variation provides stakeholders, including first responders, with the likely range of concentrations in the building when little is known about the building characteristics and operating behavior, such as developing urban-scale hazard and consequence analyses. We show differences in indoor measurements at different distances to the release points, floors of the building, and heating, ventilation, and air conditioning system (HVAC) operation. We also show estimates at different time resolutions. The statistics show that in the studied medium to large commercial buildings, spatial differences would result in peak indoor concentrations in certain parts of the buildings that may be substantially higher than the building average. To our knowledge, very few tracer gas measurements have been conducted in buildings of this scope, particularly with measurements on multiple floors and within a floor. The resulting estimates of spatial variability provide a unique opportunity for hazard assessment, and comparison to multi-zone models.     

Synthesis and physicochemical characteristics of polymolybdenum(VI) phenylsiloxanes by means of different methods

Interaction of molybdenyl(VI) bis(acetylacetonate) with polyphenylsiloxane in xylene and under mechanochemical activation conditions has been investigated. The interaction in solution proceeds with splitting of the siloxane bond and formation of polymolybdenum(VI) phenylsiloxane with different silicon/metal ratios. The fractions with the silicon/metal ratio < 2 are characterized with high degree of crystallinity and low solubility, whereas those with the ratio > 2 are amorphous. The interaction of the above reagents under mechanical activation conditions proceeds with the formation of soluble polymers similar to those obtained in a solution with the silicon/molybdenum ratio equal to 2.6. The crystal chemistry parameters of the fraction obtained in solution with the ratio Si/Mo equals to 1:2 have been calculated on the basis of the X-ray diffraction analysis data using the Debye–Shearer equation. It has been demonstrated that the chain cross section found using the Miller–Boyer method coincides with that calculated geometrically on the basis of literature data on bond lengths and angles. It is shown that the interaction of molybdenyl(VI) bis(acetylacetonate) with polyphenylsiloxane takes place in solution more deeply than under the conditions of mechanochemical activation and is accompanied by the process of separation siloxanes connection. This leads to the formation of a fraction with smaller ratio of substances than the initial ratio.     

Experimental verification of discrete models for combustion of microheterogeneous compositions forming condensed combustion products (Review)

Combustion, Explosion, and Shock Waves - This paper presents an analytical review of modern quasihomogeneous and discrete models of gasless combustion. Particular attention is given to experiments...