Miscibility and fracture toughness of thermoplastic polyurethane/poly(vinyl chloride)/nitrile rubber ternary blends with special reference to the blend composition

Ternary blends of thermoplastic polyurethane and a poly(vinyl chloride)/nitrile rubber blend were investigated in this work. The blends, with weight ratios of 100/0, 80/20, 40/60, 60/40, 80/20, and 0/100, were prepared via melt blending. Dynamic mechanical analysis showed that the blends with ratios of 20/80 and 80/20 were miscible, whereas the 40/60 and 60/40 blends were partially miscible. IR spectroscopy studies showed shifts in the peaks due to specific interactions in the blends. The blends showed degradation behavior between the blend components. The fracture toughness was investigated with the J‐integral by the locus method; the components and the miscible blends had good fracture toughness, whereas the other blends had lower toughness. Similar behavior was observed for the tensile properties. Scanning electron microscopy studies showed the morphological variations in the blends. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1763–1770, 2005     

Performance evaluation of saponin over other organic acid and tap water for removal of chromium in tannery sludge by electrokinetic enhancement

The performance of Saponin over different electrolyte-mediated electrokinetic (EK) process for removal of Cr(III) from tannery sludge was assessed. Saponin exhibited maximum Cr(III) removal efficiency, i.e. 67.6–80.75% as compared to other groups of processing fluids. The possible mechanistic approach for the highest removal efficiency of saponin over other electrolytes may be attributed to synchronized effect of micelle formation and subsequent complexation and sorption of chromium ions. The highest electroosmotic flow rate of saponin indicated low electroosmotic resistance during EK process, which validates the observed trend. Therefore, saponin can be considered as a promising electrolyte for EK treatment of tannery sludge.

Abbreviation: CA: Citric acid; LA: lactic acid; OA: oxalic acid; BOD: biochemical oxygen demand; COD: chemical oxygen demand; EK: electokinetic.     

一种高效又经济的混炼方法——在配方中添加塑解剂Acimel

一种高效又经济的混炼方法———在配方中添加塑解剂ＡｃｉｍｅｌＤｒ．ＣｈａｋｒａｂｏｒｔｙＳ（ＩＣＩＩｎｄｉａＬｉｍｉｔｅｄ）橡胶是一种弹性体，相对分子质量比较高，在加工温度下有较高的粘度。若不加入配合剂，橡胶本身是无法使用的。由于要加入的配合剂大多...     

Measurement of AC conductivity and dielectric properties of flexible conductive styrene–butadiene rubber‐carbon black composites

Flexible conductive polymer composites were prepared using styrene–butadiene rubber (SBR) as a matrix and conductive carbon black as filler. The filler loading was varied from 10 to 60 phr. The effect of frequency, filler loading, temperature, and applied pressure on the AC conductivity, permittivity, and loss factor of the composites was studied. The AC conductivity of low and high loaded composites was found to be frequency dependent and independent respectively. The permittivity and the loss factor were continuously decreasing with increasing frequency. The increase in filler loading increased the AC conductivity, dielectric constant, and loss factor of the composites. Increase in temperature imposed increase in conductivity and permittivity of the composites. With increasing applied pressure the properties showed exponential increase. The effect of time under a constant compressive stress was studied and dielectric relaxation times were evaluated. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 986–995, 2007     

Electrical Conduction in Nano-Structured La0.9Sr0.1Al0.85Co0.05Mg0.1O3 Perovskite Oxide

Nanocrystalline La_0.9Sr_0.1Al_0.85Co_0.05Mg_0.1O₃ oxide powder was synthesized by a citrate–nitrate auto-ignition process and characterized by thermal analysis, X-ray diffraction, and impedance spectroscopy measurements. Nanocrystalline (50–100 nm) powder with perovskite structure could be produced at 900°C by this process. The powder could be sintered to a density more than 96% of the theoretical density at 1550°C. Impedance measurements on the sintered samples unequivocally established the potential of this process in developing nanostructured lanthanum aluminate-based oxides. The sintered La_0.9Sr_0.1Al_0.85Co_0.05Mg_0.1O₃ sample exhibited a conductivity of 2.40 × 10⁻² S/cm in air at 1000°C compared with 4.9 × 10⁻³ S/cm exhibited by La_0.9Sr_0.1Al_0.85Mg_0.15O₃.     

Epoxy/poly(methyl methacrylate) interpenetrating polymer networks—morphology,mechanical and thermal properties

Full and semi-IPNs were prepared from epoxy and poly methyl methacrylate (PMMA), by the sequential mode of synthesis and were characterized by measurements of ultimate tensile strength (UTS), elongation at break, modulus, and toughness. Aromatic polyamine adducts and ethylene glycol dimethacrylate were used as the crosslinkers for epoxy and comonomer/crosslinker for methyl methacrylate monomer, respectively. Higher UTS and modulus of the semi-IPNs over full IPNs were attributed to the higher probability of interpenetration. The weight retention in the thermal decomposition of the IPNs and semi-IPNs were higher than the epoxy homopolymer. This enhancement was presumably related to the presence of the unzipped methyl methacrylate monomer which acted as radical scavangers in the epoxy degradation. © 1994 John Wiley & Sons, Inc.     

Skin detection in video under uncontrolled illumination

Multimedia Tools and Applications - Many vision-based human-computer interaction (HCI) applications require skin detection. However, their performance relies on accuracy in detecting skin regions...     

A chaotic framework and its application in image encryption

A novel image encryption framework is proposed in this article. A new chaotic map and a pseudorandom bit generator are proposed. Apart from this, a novel image encryption system is designed based on the proposed map and the proposed pseudorandom bit generator. These three are the major contributions of this work that makes a complete cryptosystem. The proposed new chaotic map is proposed which will be known as the ‘RCM map’ and its chaotic property is studied based on Devaney’s theory. The proposed pseudorandom bit generator is tested using the NIST test suite. The proposed method is simple to implement and does not involve any highly complex operations. Moreover, the proposed method is completely lossless, and therefore cent percent of data can be recovered from the encrypted image. The decryption process is also simple to implement i.e. just reverse of the encryption procedure. A scrambling algorithm is also proposed to further enhance the security of the overall system. The simulation, detailed analysis, and comparative studies of the proposed overall image encryption framework will help to understand the strengths and weaknesses of it. The experimental results are very promising and show the prospects of chaos theory and its usage in the field of data security.

     

A Shot boundary Detection Technique based on Visual Colour Information

The paper proposes a novel video segmentation system with maiden application of CIEDE2000 colour-difference and mean luminace pattern. CIEDE2000 colour-difference uses Lab colour space which is a stable and efficient colour space. The main advantage of Lab colour space model is that it can approximate all the available colours perceived by our human eye. CIEDE2000 colour difference is used for detecting abrupt transitions in the video. The novel contribution of the paper is the maiden use of the mean luminance pattern, increasing and decreasing patterns of the mean value of frame luminance, for detecting the gradual transition. The approach is validated on standard databases TRECVid 2001 and 2007 test video database. The performance of the proposed technique is compared with recently reported techniques and found to be superior as compared to other techniques. The accuracy achieved with the proposed method on the standard databases is 95.9% for cut transition, 78.6% for gradual transition and 92.1% overall.

     

Oxidation of Hf2SnC and Nb2SnC in Air in the 400–600°C Temperature Range

The oxidation behavior in air of fully dense, predominantly (92+vol.%) single phase, samples of Nb₂SnC and Hf₂SnC was studied in the 400–600°C temperature range. The oxidation products in both cases were SnO, SnO₂ and either Nb₂O₅ or HfO₂. The oxidation is characterized by an initial incubation period, the duration of which decreased with increasing temperatures, followed by a period of near-linear oxidation kinetics. Oxidation at temperatures as low as 400°C for 72 hr resulted in the total disintegration of bulk samples, and their total conversion to oxides. Comparison with published results indicate that the oxidation kinetics of Hf₂SnC are poorer than those of Hf or HfC. Similarly, Nb₂SnC is more prone to oxidation than pure Nb metal.