Bleaching of indigo-dyed denim fabric by electrochemical formation of hypohalogenites in situ

The use of hypochlorite, formed in situ by anodic oxidation of sodium chloride solution, for bleaching indigo-dyed denim has been studied at room temperature and at 50 °C. A direct relationship between the charge flow applied and the bleaching effect was observed. This enables consistent oxidative bleaching to be achieved by controlling the electrochemical process. The use of mixed anolytes containing small concentrations of bromide ions enhanced the bleaching effect considerably, even after lowering the temperature to room temperature. The molar concentration of bromide ions required was much lower than that of chloride in the anolyte.     

Toughness Optimization of SBR Elastomers – Use of Fracture Mechanics Methods for Characterization

Elastomer materials are used in a wide application range and subjected to different loading from which failure of the material results. Because this failure is caused by initiation and propagation of cracks, the application of fracture mechanics methods for the assessment of the material is obvious. A short summary of the methods of technical fracture mechanics including possibilities of determination of crack resistance curves is given. Vulcanizates on the basis of SBR 1500 with various sulfur and carbon black contents were investigated. For describing the crack initiation and crack propagation behavior, several fracture mechanics examination methods were applied. Tear‐analyzer results were used to assess the crack propagation behavior under fatigue‐like loading conditions. Furthermore, for the characterization of the crack resistance of the materials under impact‐like loading conditions, instrumented tensile‐impact tests were performed. To obtain information about the initiation and propagation of a stable crack, quasi‐static fracture mechanics tests were applied. The results of the several tests are discussed in dependence on sulfur and carbon black contents. We found a non‐monotonous behavior of the toughness as a function of carbon black loading. An explanation is given in connection with a percolation‐like transition in filler morphology on larger length scales.

Schematic crack propagation curve for characterizing the fatigue behavior of the vulcanizates recorded in a TFA test.     

Tailoring of Surfaces with Ultrathin Layers for Controlled Binding of Biopolymers and Adhesion and Guidance of Cells

Various strategies are described for the bio-functionalization of solid substrates by design of interfacial architectures. The first approach is based on the self-assembly process of long-chain thiol molecules from solution to a (noble) metal surface. If some of these building blocks carry a binding site (ligand) for proteins (receptors, antibodies, etc.) the metal surface can be tailored for maximum specific binding while simultaneously minimizing nonspecific adsorption. The second concept is based on polymers that are covalently attached to (oxide) surfaces. The preparation of these (end-) grafted functional polymers involves either the binding of preformed macromolecules to corresponding sites at the surface of the support or the recently introduced “grafting-from” method, by which an initiator molecule is first covalently bound to the surface and then activated — either by heat or light — in the presence of suitable monomer units such that a polymer chain grows from the solid/solution interface. Finally, the functionalization of patterned surfaces by peptide chains that mimic the binding domains of cell adhesion proteins is summarized. It is demonstrated that not only the selective adhesion of neuronal cells can then be controlled, but also their development with the outgrowth of dendrites and axons.     

Depletion of Grain-Boundary Phase and Elastic Creep Deformation Upon Ultra-Long Flexural Stress Rupture Experiments of NC-132 Silicon Nitride

A unique grain-boundary structure evolution was observed in two MgO-doped silicon nitride specimens (Norton, NC-132) that were tested in ultra-long flexure stress rupture experiments with an applied stress of 266 MPa and fractured at 14 941 and 17 376 h. Transmission electron microscopy showed that, although the starting material had a secondary glass phase both at multi-grain junctions and along grain boundaries, the tested specimens contained no residual glass phase. Concurrent with the elimination of the secondary glass phase, a continuous network of cracked grain boundaries was observed after long-term flexure testing consistent with the concept of elastic creep. It is, therefore, concluded that at ultra-long annealing times, this material is affected by creep deformation via microcrack nucleation and growth due to the depletion of the amorphous siliceous grain-boundary phase, which is seen as a truly transient, fugitive secondary phase.     

Syntheses and reactions of urethanes of cellobiose and cellulose-containing uretdione groups

Urethanes of cellobiose and cellulose-containing uretdione groups are synthesized by the reaction of aliphatic and aromatic diisocyanate uretdiones with the saccharides. The syntheses are performed as a heterogeneous reaction in dimethyl acetamide using dibutyl tin dilaurate as a catalyst, as well as a homogeneous reaction in dimethyl acetamide-lithium chloride. Thus, Semisynthetic prepolymers are formed that offer the reactivity of (blocked) isocyanate groups. To demonstrate their reactivity, ring opening of the uretdiones is performed by the addition of a secondary amine to yield the corresponding ureas.     

The Kinetics of the Thermal Decomposition of Thermoplastic Polyurethane Elastomers under Thermoplastic Processing Conditions

A theoretical approach to the kinetics of the thermal decomposition of molten thermoplastic polyurethane elastomers, under conditions of thermoplastic processing, is described. On the basis of these considerations, the thermal decomposition in different instruments (melt index analyser and measuring extruder) can be described quantitatively and the various results can be compared. As a result, identical conditions of decomposition of the melt can be defined accurately, thus opening up the possibility of combining experimental values from different instruments. The fundamental kinetic equation obtained for the kinetics of the thermal decomposition of thermoplastic polyurethanes describes the decomposition reaction and the reverse reaction (formation reaction) – which is dependent on the system of measurement and processing – as a function of the molar mass (end‐group concentration) of the original product, determined from the velocity constants for the decomposition reaction and back reaction. The consideration of the limiting value for t → ∞ is in agreement with the equilibrium constant. Consequently, the development of physical characteristic functions of thermoplastic polyurethane elastomers – independent of the system of measurement – is possible.

Experimental values and calculated curves for the thermal decomposition of PUR‐Et in a melt index analyser.     

Engineering plastics from lignin. VI. Structure–property relationships of PEG-containing polyurethane networks

Hydroxypropyl lignin-based thermosetting polyurethanes were synthesized with excess hexamethylene diisocyanate (HDI) and tolylene diisocyanate (TDI) by solution casting. Four polyethylene glycols (PEG) of molecular weight 400, 600, 1000, and 4000 were mixed with lignin polyol to incorporate different proportions of soft segment into the network prior to crosslinking. Neither thermal nor mechanical and limited small angle x-ray scattering (SAXS) analysis provided distinct evidence for phase separation and microstructure formation. The study examines the effect of the soft segment in relation to chain length and weight contribution on the thermal and mechanical properties of the final networks. A significant sensitivity of glass transition temperature (T_g), of swelling in DMF, and of the mechanical properties to soft segment content was observed. Some of this sensitivity must, however, be attributed to differences in crosslink density since the polyol to diisocyanate weight ratio was kept constant throughout the synthesis series. The magnitude of the change of the different properties was found to be influenced by both glycol content and glycol molecular weight. The T_g of the network decreased from 105°C to as low as 38°C (HDI), and from 158°C to 70°C (TDI), with incorporation of up to 17.8% glycol, and it was greater with lower molecular weight glycols than with higher ones at any weight fraction. Swelling in DMF increased as expected with soft segment content. Mechanical properties were affected most if HDI and lower molecular weight glycols were used. The uniformity in structure, reduction in brittleness, and considerable improvement in mechanical properties with inclusion of minor PEG contents indicates that lignin-based network polyurethanes can be synthesized with controllable performance characteristics.     

SOME ASPECTS OF THEORETICAL COMPARISON OF FISCHER-TROPSCH REACTORS

The reactor systems used for the Fischer-Tropsch synthesis, fixed bed, fluidized bed and slurry bed, are compared on the basis of space time yield (STY) and level of conversion obtainable under the same set of feed and operating conditions. The slurry bed and fluidized bed reactor were compared on the basis of a first order reaction model. The performance of these two reactors was found to be comparable at low values of WHSV, but at higher values of WHSV, the fluidized bed reactor gave higher conversions and STY. A power law kinetic expression was used to compare the performance of the slurry bed and fixed bed reactors. Higher conversions and STY were obtained from the fixed bed with varying WHSV. This may be due to the omission of the intra and inter phase mass transfer resistances in the modelling of the fixed bed reactor.