The effect of elevated temperature and silicon addition on a cobalt-based wear resistant superalloy

The effects of an elevated temperature and a 5 wt% silicon addition on the resultant microstructure and inherent phases of Stellite 6 were investigated by using room and high temperature optical microscopy, X-ray diffraction, scanning electron microscopy (SEM) and also bulk hardness and microhardness measurements. It has been observed that exposing Stellite 6 to heat treatments at 1000°C results in a characteristic textured structure and coarsening of interdendritic regions due to bulk diffusion. In addition, both dendritic and interdendritic hardness values increase due to texture formation and increased amounts of carbide and intermetallic phases, respectively. On the other hand, silicon addition to Stellite 6 causes the transformation of the original spongy dendritic microstructure in as-cast Stellite 6 to a eutectic dendritic and skeleton interdendritic structure. Also, when silicon added Stellite 6 was heat treated at 1000°C, particulates emanating from the interdendritic skeleton become irregularly dispersed in the dendritic region. In addition, similarly to Stellite 6; a high temperature heat treatment results in an increase in hardness values of silicon added Stellite 6 due to the presence of an Co₂ Si intermetallic phase.     

High nutrient loading and climatic parameters influence the dominance and dissimilarity of toxigenic cyanobacteria in northern bays of Lake Victoria

Eutrophication of Lake Victoria led to changes in its phytoplankton communities. However, different levels of eutrophication exist in the open lake and the bays, and between embayments. This study utilized spatial and temporal sampling of Napoleon Gulf and Murchison Bay, exhibiting different trophic conditions. Over one year, we investigated phytoplankton biomass, richness, diversity and dissimilarity, and related the dynamics of the dominant species to the limnological and climatic conditions. The results confirmed that Napoleon Gulf and Murchison Bay showed large differences in eutrophication status, with lower nutrient concentrations in Napoleon Gulf than in Murchison Bay, where a strong gradient was observed from inshore to offshore areas. These nutrient dynamics resulted in a 4 to 10 fold higher chlorophyll-a in Murchison Bay than in Napoleon Gulf. From the embayments, 135 phytoplankton taxa were recorded with no significant differences in alpha diversity. However, high dissimilarity in community structure was observed in beta diversity, mostly due to a turnover among the dominant toxigenic species. Thus, from a similar species pool, there was a shift in the dominant toxigenic cyanobacteria from Microcystis flos-aquae and M. aeruginosa in Murchison Bay, Dolichospermum circinale and Planktolyngbya circumcreta in Napoleon Gulf to D. circinale in the offshore stations. These cyanobacteria are toxigenic taxa with known health hazards. Using partial least square models, we showed that both climatic variables (e.g. wind, solar radiation) and levels of inorganic dissolved nutrients (e.g. SRP, NO₃^–, and NH₄⁺) are the main drivers of differences and dominance in cyanobacteria communities in northern Lake Victoria.     

Observing Inequality: Can Ergonomic Observations Help Interventions Transform the Role of Gender in Work Activity?

Computer Supported Cooperative Work (CSCW) - Work activity ergonomics (sometimes called francophone ergonomics) draws heavily on observation in order to support transformation of work to arrive at...     

Design optimization of supersonic jet pumps using high fidelity flow analysis

Supersonic jet pumps are simple devices with no moving parts, where a high velocity (primary) flow is used to pump a second fluid. In this paper, Computational Fluid Dynamics (CFD) is combined with an optimization framework in order to develop a tool for the rapid generation of jet pump designs. A key feature of the problem formulation is the transformation of the jet pump design parameters in terms of geometric ratios. This approach dramatically reduces the number of unrealistic designs covered by the Design of Experiments. Optimal Latin Hypercubes for surrogate model building and model validation points are constructed using a permutation genetic algorithm and design points are evaluated using CFD. Surrogate models of primary and entrained flow rates are built using a Moving Least Squares approach. A series of optimizations for various pump sizes are performed using a genetic algorithm and Sequential Quadratic Programming, with responses calculated from the surrogates. This approach results in a set of optimized designs, from which pumps for a wide range of flow rates can be interpolated.     

Synthesis and Evaluation of Voltage-Gated Sodium Channel Blocking Pyrroline Derivatives Endowed with Both Antiarrhythmic and Antioxidant Activities

Under the hypothesis that cardioprotective agents might benefit from synergism between antiarrhythmic activity and antioxidant properties, a small series of mexiletine analogues were coupled with the 2,2,5,5-tetramethylpyrroline moiety, known for its antioxidant effect, in order to obtain dual-acting drugs potentially useful in the protection of the heart against post-ischemic reperfusion injury. The pyrroline derivatives reported herein were found to be more potent as antiarrhythmic agents than mexiletine and displayed antioxidant activity. The most interesting tetramethylpyrroline congener, a tert-butyl-substituted analogue, was at least 100 times more active as an antiarrhythmic than mexiletine.     

Direct-Ink-Writing of Electroactive Polymers for Sensing and Energy Storage Applications

Considering the high levels of materials used in the fields of electronics and energy storage systems, it is increasingly necessary to take into consideration environmental impact. Thus, it is important to develop devices based on environmentally friendlier materials and/or processes, such as additive manufacturing techniques. In this work, poly(vinylidene fluoride) (PVDF) and poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) are prepared by direct-ink-writing (DIW) by varying solvent evaporation temperature and fill density percentage. Different morphologies for both polymers are obtained, including dense films and porous membranes, as well as different electroactive β-phase content, thermal and mechanical properties. The dielectric constant and piezoelectric d₃₃ coefficient for dense films reaches up to 16 at 1 kHz and 4 pC N⁻¹, respectively for PVDF-HFP with a fill density of 80 and a solvent evaporation temperature of 50 °C. Porous structures are developed for battery separator membranes in lithium-ion batteries, with a highest ionic conductivity value of 3.8 mS cm⁻¹ for the PVDF-HFP sample prepared with a fill density of 100 and a solvent evaporation temperature of 25 °C, the sample showing an excellent cycling performance. It is demonstrated that electroactive films and membranes can be prepared by direct-ink writing suitable for sensors/actuators and energy storage systems.     

A study of the cu clusters using gray-coded genetic algorithms and differential evolution

Energy minimization studies were carried out for a number of Cu clusters using binary and Gray-coded genetic algorithms along with real coded differential evolution, and their optimized ground state geometries are presented. The potential energy function is constructed using a two-body interaction methodology, involving both attractive and repulsive pair-potential terms. The results obtained through the evolutionary algorithms are compared against those obtained earlier using a Monte Carlo technique.     

Varnish layer hardness of oriental beech (fagus orientalist L.) wood as affected by impregnation and bleaching

The impacts of impregnation and bleaching on the varnish layer hardness of Oriental beech (Fagus orientalist L.) wood were investigated. A number of bleaching combinations {[NaOH−H₂O₂], [NaOH−Ca(OH)₂−H₂O₂], [NaOH−MgSO₄−H₂O₂] [NaHSO₃−H₂C₂O₄], [NaSiO₃−H₂O₂], [KMnO₄+NaHSO₃+H₂O₃]} were applied at 18% concentration for bleaching to both impregnated and unimpregnated specimens of Oriental beech wood. Subsequently, water-based (WB) varnish was coated over the samples and the varnish layer hardness values were determined in accordance with ASTM D 4366-95. All of the chemicals used for bleaching reduced the surface hardness. However, after varnish coating, the hardness of most samples was similar to that of the varnish-coated natural (control) samples.     

Replacement of dietary fish oil with increasing levels of linseed oil: Modification of flesh fatty acid compositions in Atlantic salmon (<Emphasis Type="Italic">Salmo salar</Emphasis>) using a fish oil finishing diet

Five groups of salmon, of initial mean weight 127±3 g, were fed increasing levels of dietary linseed oil (LO) in a regression design. The control diet contained capelin oil (FO) only, and the same oil was blended with LO to provide the experimental diets. After an initial period of 40 wk, all groups were switched to a finishing diet containing only FO for a further 24 wk. Growth and flesh lipid contents were not affected by dietary treatment. The FA compositions of flesh total lipids were linearly correlated with dietary FA compositions (r ²=0.88–1.00, P<0.0001). LO included at 50% of added dietary lipids reduced flesh DHA and EPA (20∶5n−3) concentrations to 65 and 58%, respectively, of the concentrations in fish fed FO. Feeding 100% LO reduced flesh DHA and EPA concentrations to 38 and 30%, respectively, of the values in fish fed FO. Differences between diet and flesh FA concentrations showed that 16∶0, 18∶1n−9, and especially DHA were preferentially retained in flesh, whereas 18∶2n−6, 18∶3n−3, and 22∶1n−11 were selected against and presumably utilized for energy. In fish previously fed 50 and 100% LO, feeding a finishing diet containing FO for 16 wk restored flesh DHA and EPA concentrations, to ≈80% of the values in fish fed FO throughout. Flesh DHA and EPA concentrations in fish fed up to 50% LO were above recommended intake values for humans for these EFA. This study suggests that LO can be used as a substitute for FO in seawater salmon feeds and that any reductions in DHA and EPA can be largely overcome with a finishing diethigh in FO before harvest.