Dynamique des lasers à fibre dopée à I’erbium

The dynamics of the erbium doped fiber laser is analysed both experimentally and theoretically. This laser operates spontaneously in self-pulsing, in sinusoidal or in CW regime. Experiments have allowed to determine the control parameters : the cavity losses, the pumping rate and the ion pairs concentration. An antiphase dynamics is observed when the laser operates simultaneously at 1.55 µn and 1.536 µm. The self-pulsing behavior is attributed to a fast energy transfer which occurs between two neighboring ions (pair induced quenching). A simple model considering the active medium as a mixture of isolated ions and ions pairs is developped and leads to a good qualitative agreement with the experimental results.     

Impact of white-matter mask selection on DTI histogram-based metrics as potential biomarkers in cerebral small vessel disease

Magnetic Resonance Materials in Physics, Biology and Medicine - Histogram-based metrics extracted from diffusion-tensor imaging (DTI) have been suggested as potential biomarkers for cerebral small...     

Evolutionary design of neural network architectures: a review of three decades of research

We present a comprehensive review of the evolutionary design of neural network architectures. This work is motivated by the fact that the success of an Artificial Neural Network (ANN) highly depends on its architecture and among many approaches Evolutionary Computation, which is a set of global-search methods inspired by biological evolution has been proved to be an efficient approach for optimizing neural network structures. Initial attempts for automating architecture design by applying evolutionary approaches start in the late 1980s and have attracted significant interest until today. In this context, we examined the historical progress and analyzed all relevant scientific papers with a special emphasis on how evolutionary computation techniques were adopted and various encoding strategies proposed. We summarized key aspects of methodology, discussed common challenges, and investigated the works in chronological order by dividing the entire timeframe into three periods. The first period covers early works focusing on the optimization of simple ANN architectures with a variety of solutions proposed on chromosome representation. In the second period, the rise of more powerful methods and hybrid approaches were surveyed. In parallel with the recent advances, the last period covers the Deep Learning Era, in which research direction is shifted towards configuring advanced models of deep neural networks. Finally, we propose open problems for future research in the field of neural architecture search and provide insights for fully automated machine learning. Our aim is to provide a complete reference of works in this subject and guide researchers towards promising directions.

     

Modifying continuous-time random walks to model finite-size particle diffusion in granular porous media

The continuous-time random walk (CTRW) model is useful for alleviating the computational burden of simulating diffusion in actual media. In principle, isotropic CTRW only requires knowledge of the step-size, \(P_l\), and waiting-time, \(P_t\), distributions of the random walk in the medium and it then generates presumably equivalent walks in free space, which are much faster. Here we test the usefulness of CTRW to modelling diffusion of finite-size particles in porous medium generated by loose granular packs. This is done by first simulating the diffusion process in a model porous medium of mean coordination number, which corresponds to marginal rigidity (the loosest possible structure), computing the resulting distributions \(P_l\) and \(P_t\) as functions of the particle size, and then using these as input for a free space CTRW. The CTRW walks are then compared to the ones simulated in the actual media. In particular, we study the normal-to-anomalous transition of the diffusion as a function of increasing particle size. We find that, given the same \(P_l\) and \(P_t\) for the simulation and the CTRW, the latter predicts incorrectly the size at which the transition occurs. We show that the discrepancy is related to the dependence of the effective connectivity of the porous media on the diffusing particle size, which is not captured simply by these distributions. We propose a correcting modification to the CTRW model—adding anisotropy—and show that it yields good agreement with the simulated diffusion process. We also present a method to obtain \(P_l\) and \(P_t\) directly from the porous sample, without having to simulate an actual diffusion process. This extends the use of CTRW, with all its advantages, to modelling diffusion processes of finite-size particles in such confined geometries.     

Anticipating Cutoff Diameters in Deterministic Lateral Displacement (DLD) Microfluidic Devices for an Optimized Particle Separation

Deterministic lateral displacement (DLD) devices enable to separate nanometer to micrometer‐sized particles around a cutoff diameter, during their transport through a microfluidic channel with slanted rows of pillars. In order to design appropriate DLD geometries for specific separation sizes, robust models are required to anticipate the value of the cutoff diameter. So far, the proposed models result in a single cutoff diameter for a given DLD geometry. This paper shows that the cutoff diameter actually varies along the DLD channel, especially in narrow pillar arrays. Experimental and numerical results reveal that the variation of the cutoff diameter is induced by boundary effects at the channel side walls, called the wall effect. The wall effect generates unexpected particle trajectories that may compromise the separation efficiency. In order to anticipate the wall effect when designing DLD devices, a predictive model is proposed in this work and has been validated experimentally. In addition to the usual geometrical parameters, a new parameter, the number of pillars in the channel cross dimension, is considered in this model to investigate its influence on the particle trajectories.     

The microstructure of a graphene-reinforced tennis racquet

The microstructure of a graphene-reinforced tennis racquet has been analysed using a combination of optical microscopy and Raman spectroscopy. It is shown that the main structural components in the racquet frame are high-strength carbon fibres in an epoxy resin matrix. It is also found that graphene-based nanoparticles are used to reinforce resin-rich regions in the shaft of the racquet at the discontinuity in the fibre tows, where the handle is joined to the racquet head. From a detailed analysis of the relative positions and intensities of the Raman G and 2D bands, it is demonstrated that the nanoparticles employed in the racquet are most probably graphite nanoplatelets which have been added to improve the mechanical properties of the resin-rich regions. The nomenclature used for describing graphene-based materials is also discussed in the context of this present study.     

Achieving robust design through statistical effect screening

This work proposes a method for statistical effect screening to identify design parameters of a numerical simulation that are influential to performance while simultaneously being robust to epistemic uncertainty introduced by calibration variables. Design parameters are controlled by the analyst, but the optimal design is often uncertain, while calibration variables are introduced by modeling choices. We argue that uncertainty introduced by design parameters and calibration variables should be treated differently, despite potential interactions between the two sets. Herein, a robustness criterion is embedded in our effect screening to guarantee the influence of design parameters, irrespective of values used for calibration variables. The Morris screening method is utilized to explore the design space, while robustness to uncertainty is quantified in the context of info‐gap decision theory. The proposed method is applied to the National Aeronautics and Space Administration Multidisciplinary Uncertainty Quantification Challenge Problem, which is a black‐box code for aeronautic flight guidance that requires 35 input parameters. The application demonstrates that a large number of variables can be handled without formulating simplifying assumptions about the potential coupling between calibration variables and design parameters. Because of the computational efficiency of the Morris screening method, we conclude that the analysis can be applied to even larger‐dimensional problems. (Approved for unlimited, public release on October 9, 2013, LA‐UR‐13‐27839, Unclassified.) Copyright © 2015 John Wiley & Sons, Ltd.     

Coping with production time variability via dynamic lead-time quotation

In this paper, we propose two dynamic lead-time quotation policies in an M/GI/1 type make-to-stock queueing system serving lead-time sensitive customers with a single type of product. Incorporating non-exponential service times in an exact method for make-to-stock queues is usually deemed difficult. Our analysis of the proposed policies is exact and requires the numerical inversion of the Laplace transform of the sojourn time of an order to be placed. The first policy assures that the long-run probability of delivering the product within the quoted lead-time is the same for all backlogged customers. The second policy is a refinement of the first which improves the profitability if customers are oversensitive to even short delays in delivery. Numerical results show that both policies perform close to the optimal policy that was characterized only for exponential service times. The new insight gained is that the worsening impact of the production time variability, which is felt significantly in systems accepting all customers by quoting zero lead times, decreases when dynamic lead-time quotation policies are employed.