Design, manufacture and evaluation of a new and simple mechanism for transmission of power between intersecting shafts up to 135 degrees (Persian Joint)

This paper introduces a new mechanism which is designed for the transmission of power between two intersecting shafts. The mechanism consists of one drive shaft and one driven shaft, six guide arms, and three connecting arms. The intersecting angle between the input shaft and the output shaft can be varied up to 135° while the velocity ratio between the two shafts remains constant. The research also includes a kinematic analysis and a simulation using Visual NASTRAN, Autodesk Inventor Dynamic and COSMOS Motion. The softwares showed that this mechanism can transmit constant velocity ratios at all angles between two shafts. By comparing the graphs of analytical analysis and simulation analysis, validity of equations was proved. Finally, by fabrication and evaluation of the mechanism it was shown that this mechanism can transmit constant velocity practically.     

Integrated Fuzzy DEA-ANFIS to Measure the Success Effect of Human Resource Spirituality

Workplace spirituality has gained attention as it is proven to be a contributor to organizational performance improvement. This paper aims to assess the impact of human resource spirituality on the success of organizational strategic change projects. The success of the projects is measured by the well-known criterion of deviation from the planned budget cost. Data collection is based on a questionnaire survey of 252 personnel in 36 large and medium-scale organizational change projects in power industry. The paper proposes an integrated algorithm of fuzzy data envelopment analysis (FDEA) and adaptive network-based fuzzy inference system (ANFIS) for measuring the pure effect of human resource spirituality on the success of organizational change projects in the power industry. It also achieves a verified tool capable of addressing complexity, nonlinearity, ambiguity, and fuzziness for measuring spirituality of human resources in the projects. Results show that spirituality of the project team has a significant effect on project success.     

Effect of Iron sulfate as electrolyte additive on plasma electrolytic oxidation of aluminum alloy

This study has been carried out to investigate the incorporation of Iron(II) sulfate as an additive of electrolyte on formed AA1010 aluminum alloy, using plasma electrolytic oxidation method in silicate-based electrolytes containing Iron(II) sulfate. In order to fabricate nanocomposite coating, silicon nitride nanopowder was added to electrolyte. The effects of iron(II) sulfate additive on the voltage-time trend, microstructure, compositions, wear, and corrosion resistances of PEO coatings were investigated. In addition, current density and concentration of additive were studied as parameters that were effective on coating. Results showed that although FeSO₄ enters to the coating structure, but it does not develop a new phase. The corrosion and wear behavior of coated samples with FeSO₄ indicate an improvement as compared to those without additive.     

Introducing a proper hydrogen liquefaction concept for using wasted heat of thermal power plants-case study: Parand gas power plant

A hydrogen liquefaction concept with an innovative configuration and a capacity of 4 kg·s^-1 (345.6 t·d^-1) is developed. The concept involves an ammonia absorption refrigeration system for the pre-cooling of hydrogen and MR streams from 25 ℃ to -30 ℃. The ammonia absorption refrigeration system is fed by exhaust gases of the Parand gas power plant that are normally dissipated to the environment with a temperature of 546 ℃. The simulation is performed by Aspen HYSYS V9.0, using two separate equations of state for simulating hydrogen and MR streams to gain more accurate results especially for ortho-para conversion. Results show that conversion enthalpy estimated by Aspen HYSYS, fits very well to the experimental data. Determining the important independent variables and composition of MRs are done using trial and error procedure, a functional and straightforward method for complicated systems. The minimum temperature limit in the cooling section is lowered, and an ortho-para converter is implemented in this section. The proposed concept performs well from energy aspects and leads to COP and SEC equal to 0.271 and 4.54 kW·h·kg^-1, respectively. The main advantage of this study is in the low SEC, eliminating the losses of the distribution network, and improving the ability of the hydrogen liquefaction for energy storage in off-peak times.     

Graphene network enabled high speed electrical actuation of shape memory nanocomposite based on poly(vinyl acetate)

Here strong electroactive shape memory nanocomposites were prepared by incorporating graphene nanoplatelets into poly(vinyl acetate) (PVAc ) through the simple solvent mixing method. TEM and XRD revealed that well exfoliated graphene nanoplatelets formed a continuous network throughout the matrix with a large amount of interconnectedness. Dynamic mechanical analysis showed that the inclusion of graphene significantly improves both glassy and rubbery moduli of the matrix. Furthermore, the prepared nanocomposites demonstrated a marked electrical conductivity up to 24.7 S m^?1 and thereby surprisingly rapid electrical actuation behaviour exhibiting a 100% recovery ratio in 2.5 s. Moreover, PVAc and its nanocomposites displayed scratch self‐healing capability. This work demonstrates that the PVAc /graphene nanocomposites with high modulus and excellent electroactive shape memory performance can be a promising material in many applications such as sensors and fast deployable and actuating devices. © 2016 Society of Chemical Industry     

Available and Waiting Times for Cognitive Radios

Cognitive radios (CRs) have been recently proposed for the problem of spectrum scarcity. The principle of CRs?? operation is based on the opportunistic access to the frequency spectrum mainly dedicated to primary users (PUs). The statistical time pattern of PUs?? channel usage and arrival can affect the usability of specific frequency bands for CRs. In this note, the effect of the arrival rate and channel holding time of PUs on the available times for CRs is analyzed. To this end, first, based on Poissonian arrivals, the available time for CRs is calculated. Then, assuming a gamma distribution for the inter-arrival times and a uniform distribution of channel holding time of PU in these intervals, the probability density function and moments of the available time for CRs are derived. Next, the effect of PUs statistical parameters on the average number of packets and the average symbol rate that a CR can transmit is analyzed. Also, taking that CR needs at least T seconds, the average waiting time is calculated.