多属性神经网络地震反演在NB油田水平井钻探中的应用

NB油田位于渤海海域,为新近系河流相稠油油田,储层横向分布不稳定,砂体厚度薄、连通性较差,油水关系复杂,开发设计部署了大量水平井。选择神经网络反演方法,建立地震属性与储层参数的非线性关系,进而根据其关系反演得到储层参数数据体,利用该数据体沿层切片提取储层预测信息,研究储层发育规律,指导该油田水平井的部署和钻探,取得了较好的效果,降低了钻探风险。用神经网络地震反演方法进行储层预测研究,指导水平井钻探,在渤海海域尚属首次。     

独立项目分析公司项目后评价方法体系简述

介绍该公司(简称IPA)的项目后评价做法与特点,与亚行的项目绩效审核评价进行比较.前者侧重于项目管理,旨在通过改善项目管理提高投资效率;后者侧重于投资管理,旨在通过改善投资过程的监督提高投资效率.     

国家战略发展新能源股价长期走牛可期待

严峻的能源短缺、居高不下的原油价格、日益严重的环境问题已经成为制约中国经济、社会发展的瓶颈。改变现有的以化石能源为主的能源结构,     

基于多信道预约可冲突避免的多址接入协议

本文为多跳分布多无线网络提出了一套灵活而有效的自适应获取冲突避免（AACA）的多址接入协议。在该协议中，各节点竞争公共信道，利用RTS/CTS对话形式来预约各业务信道，成功预约后的分组传输不会受到其他节点的干扰。它使用任意确定数目信道，以异步方式工作，并且使得各节点利用半双工无线电台就可以灵活、简便地实现资源预约。分析和比较结果说明，所提出的多信道预约协议可以有效地解决隐藏终端、暴露终端以及侵入终端的问题。     

基于图像的虚拟环境建模技术

综述了基于图像的虚拟现实环境的建模技术，并给出了各种模型表示的理论依据和建模过程的定义。把环境表示分为四类：全景图，光场数据库，深度图像和多投影中心图。全景图的生成包括基于图像相关性和基于图像整合变换的算法。光场数据库的分类主要依据全光函数。同时论述了在各种表示下的采样和建模技术。最后讨论了当前建模技术研究的热点及所需要解决的问题。     

钢结构住宅的技术性探讨——以清华大学钢结构学生公寓为例

以清华大学钢结构学生公寓为实例，从结构选型、材料构成、构造技术几方面对钢结构住宅的技术性问题进行分析探讨，并提出需要进一步解决的问题。     

Application of Code Approach for Emergency Evacuation in a Rail Station

This paper presents an emergency evacuation analysis during a mid-platform train fire in an underground rail station. A time-based evacuation scenario is developed taking into account the stairway inaccessibility due to smoke blockage. The calculation approach in NFPA 130 is then applied to a parametric study of this time-based scenario and its reliability is examined using a micro-simulation model. Both methods give consistent predictions of the exiting times. The results demonstrate that with the division of the station into two zones, the exiting time could not meet the code requirements, whereas it does meet the required exiting time without the division. Such division is due to smoke blockage and creates an uneven ratio of the occupant load to the available exiting capacity. This shows that appropriate consideration of the fire and smoke effects is important for station egress evaluation. Other issues such as the fire growth rate and the pre-evacuation time are also discussed.     

Y-Ba-Cu-O超导涂层的研制

用等离子喷涂工艺制备了 Y-Ba-Cu-O 高临界温度超导涂层,涂层的初始转变温度为101K、零电阻温度为86K。电阻率与磁化率的测量结果表明这种超导涂层具有与烧结超导块体相类似的性能,X 光衍射谱显示出涂层主要由 YBa_2Cu_3O_(?)单相化合物组成。     

测量机器人GeoCOM接口技术的开发与应用

介绍了测量机器人(TCA2003全站仪)的一些强大功能,分析了其自带的GeoCOM(地理数据通信)接口技术的高级模式,在此基础上利用visual Basic 6.0语言和Access数据库,通过GeoCOM接口对测量机器人进行了二次开发,并应用于某水利枢纽加密控制网的自动观测.最后,通过平差计算得出了一些参考性结论.     

Detection of failure sites by focused ion beam and nano-probing in the interconnect of three-dimensional stacked circuit structures

Focused ion beam (FIB) and nano-probing were applied for failure analysis of three-dimensional stacked circuits with copper through-silicon-vias between the stacked chips. The failure analysis was done after high temperature storage and thermal cycling tests. Passive voltage contrast in FIB allowed to pinpoint the open sites. FIB cross-sections showed the presence of opens at the bottom of the copper vias. The failure cause was suspected to be an interlayer particle, which was confirmed by optical profilometry. Nano-probing was used on another sample to pinpoint the failure location through the measurement of the local resistance within the daisy chains. The failure was traced out to be related with surface contamination.