33.7 MHz heavy-ion radio frequency quadrupole linac at VECC Kolkata

A 33.7 MHz heavy-ion radio frequency quadrupole (RFQ) linear accelerator has been designed, built, and tested. It is a four-rod-type RFQ designed for acceleration of 1.38 keVu, qA> or =116 ions to about 29 keVu. Transmission efficiencies of about 85% and 80% have been measured for the unanalyzed and analyzed beams, respectively, of oxygen ((16)O(2+), (16)O(3+), (16)O(4+)), nitrogen ((14)N(3+), (14)N(4+)), and argon ((40)Ar(4+)). The system design and measurements along with results of beam acceleration test will be presented.     

Support for Implementation of Evolutionary Concurrent Systems

Concurrent programs that embed specifications of synchronizations in the body of their component are difficult to extend and modify. Small changes in a concurrent program, particularly changes in the interactions among components, may require re-implementation of a large number of components. Even specifications of components cannot be reused easily. This paper presents a concurrent program composition mechanism in which both specification and implementation of computations and interactions are completely separated. Separation of specifications and implementations facilitates extensions and modifications of programs by allowing one to separately change the implementations of computations and interactions. It also supports their reusability. The paper also describes the design and implementation of a concurrent object-oriented programming language based on this model, including a compiler for the language, and reports on the execution behavior of programs written in the language.     

Quantitative proteomics for identification of cancer biomarkers

Quantitative proteomics can be used for the identification of cancer biomarkers that could be used for early detection, serve as therapeutic targets, or monitor response to treatment. Several quantitative proteomics tools are currently available to study differential expression of proteins in samples ranging from cancer cell lines to tissues to body fluids. 2-DE, which was classically used for proteomic profiling, has been coupled to fluorescence labeling for differential proteomics. Isotope labeling methods such as stable isotope labeling with amino acids in cell culture (SILAC), isotope-coded affinity tagging (ICAT), isobaric tags for relative and absolute quantitation (iTRAQ), and (18) O labeling have all been used in quantitative approaches for identification of cancer biomarkers. In addition, heavy isotope labeled peptides can be used to obtain absolute quantitative data. Most recently, label-free methods for quantitative proteomics, which have the potential of replacing isotope-labeling strategies, are becoming popular. Other emerging technologies such as protein microarrays have the potential for providing additional opportunities for biomarker identification. This review highlights commonly used methods for quantitative proteomic analysis and their advantages and limitations for cancer biomarker analysis.     

Creep fracture in Al-SiC metal-matrix composites

Creep fracture behaviour of pure aluminium-matrix composites with 10–30 vol% SiC particulates at 623 K is reported. A comparison of tensile and compression creep data shows the existence of a transition stress. Above this transition stress no steady state creep is observed in tension. This transition stress is related to a transition from intergranular to transgranular fracture. The origin of transition stress is perhaps associated with the diffusional relaxation of stress concentration at the matrix/particle interface by lattice diffusion. The intergranular creep fracture of composites appears to be similar to that of unreinforced aluminium and it is power-law creep controlled. The transgranular creep fracture occurs by void nucleation and growth. The nucleation strain for voids is quite small and hence the tertiary stage starts before the end of the primary stage. The ductile fracture models overestimate the strain to fracture and do not predict the observed stress dependence of strain to fracture.     

Inhibitory effect of parthenium (Parthenium hysterophorus L.) residue on growth of water hyacinth (Eichhornia crassipes Mart Solms.) II. Relative effect of flower,leaf, stem,and root residue

The relative effect of residue of leaf, flower, stem, and root of parthenium (Parthenium hysterophorus L.) on growth of water hyacinth was studied. The inhibitory activity of the residue as shown by its effect on biomass and healthy leaf number (HLN) of treated plants was in the order: leaf and flower >stem >root. Total phenolic acids in the medium after 72 hr of suspending the plant part residue were maximum in flower followed by leaf, root, and stem, successively. The dry leaf powder (DLP) and dry flower powder (DFP) at and above 0.50% (w/v) and dry stem powder (DSP) at 1.00% (w/v) killed water hyacinth in about one month. Dry root powder (DRP) at the highest dose (1.25% w/v) reduced the growth of the treated plants drastically, but the plants recovered after about one month. The DSP at 0.50% (w/v) and DRP at 0.25–0.75% (w/v) supported growth of treated plants, probably due to lower levels of inhibitors, allowing utilization of constituents of the residue as nutrients. Using wheat seedlings as a reference material, it was observed that in aquaculture at different levels of parthenium plant parts residue, water hyacinth plants were much more sensitive to inhibitory activity. Thus, water hyacinth is suggested as a material for bioassay of inhibitory activity of the parthenium plant residue.     

In-house contamination of potable water in urban slum of Kolkata, India: a possible transmission route of diarrhea

We have investigated and determined the potentiality of different water sources, both for drinking and domestic purposes, in diarrheal disease transmission in diarrhea endemic foci of urban slums in Kolkata, India in a one and half year prospective study. Out of 517 water samples, collected from different sources, stored water (washing) showed higher prevalence of fecal coliforms (58%) (p < 0.0001) in comparison with stored (drinking) samples (28%) and tap/tubewell water (8%) respectively. Among different sources, stored water (washing) samples had the highest non-permissible range of physico-chemical parameters. Fecal coliform levels in household water containers (washing) were comparatively high and almost 2/3 of these samples failed to reach the satisfactory level of residual chlorine. Interestingly, 7% stored water (washing) samples were found to be harboring Vibrio cholerae Improper usage of stored water and unsafe/poor sanitation practices such as hand washing etc. are highlighted as contributory factors for sustained diarrheal episodes. Vulnerability of stored water for domestic usage, a hitherto unexplored source, at domiciliary level in an urban slum where enteric infections are endemic, is reported for the first time. This attempt highlights the impact of quality of stored water at domiciliary level for fecal-oral contamination vis-à-vis disease transmission.     

Meshfree method for fluctuating hydrodynamics

In the current study a meshfree Lagrangian particle method for the Landau–Lifshitz Navier–Stokes (LLNS) equations is developed. The LLNS equations incorporate thermal fluctuation into macroscopic hydrodynamics by the addition of white noise fluxes whose magnitudes are set by a fluctuation–dissipation theorem. The study focuses on capturing the correct variance and correlations computed at equilibrium flows, which are compared with available theoretical values. Moreover, a numerical test for the random walk of standing shock wave has been considered for capturing the shock location.     

Percussion Laser-Drilled Holes: Characteristics and Characterization Procedure

Percussion laser drilling, being a thermal process, produces holes having widely differing characteristics than that of the mechanically drilled holes. In the present study, on the percussion laser drilling of through holes in a nickel-based superalloy (SUPERNI 263A), 21 characteristics were identified, and the methods of their determination were proposed. The effect of peak power of laser pulses on the identified hole characteristics were studied.     

External stimuli response on a novel chitosan hydrogel crosslinked with formaldehyde

Keeping in mind the significance of hydrogels as an external stimuli sensitive super absorbing material, some transparent covalent hydrogels of chitosan were prepared by crosslinking with varying amounts of formaldehyde solution used as crosslinking agent. The characteristics of hydrogels were investigated by Fourier transform infrared (FT-IR) spectroscopy and swelling experiments. The effect of crosslinking agent on water absorbency has been investigated. The hydrogels exhibited a relatively higher swelling ratio in the range of 2066–3306% and equilibrium water content (EWC) in the range of 95-38–97 06% at pH 7 and 35°C temperature. The influence of external stimuli such as pH, temperature, and ionic strength of the swelling media on equilibrium swelling properties has been observed. Hydrogels showed a typical pH and temperature responsive behaviour such as low pH and high temperature has maximum swelling while high pH and low temperature show minimum swelling. An increase in the ionic strength of swelling media caused a continuous decrease in the swelling of hydrogels at both acidic and basic pH.     

A conceptual approach to the estimation of societal willingness-to-pay for nuclear safety programs

The design, refurbishment and future decommissioning of nuclear reactors are crucially concerned with reducing the risk of radiation exposure that can result in adverse health effects and potential loss of life. To address this concern, large financial investments have been made to ensure safety of operating nuclear power plants worldwide. The efficacy of the expenditures incurred to provide safety must be judged against the safety benefit to be gained from such investments. We have developed an approach that provides a defendable basis for making that judgement.If the costs of risk reduction are disproportionate to the safety benefits derived, then the expenditures are not optimal; in essence the societal resources are being diverted away from other critical areas such as health care, education and social services that also enhance the quality of life. Thus, the allocation of society’s resources devoted to nuclear safety must be continually appraised in light of competing needs, because there is a limit on the resources that any society can devote to extend life.The purpose of the paper is to present a simple and methodical approach to assessing the benefits of nuclear safety programs and regulations. The paper presents the Life-Quality Index (LQI) as a tool for the assessment of risk reduction initiatives that would support the public interest and enhance both safety and the quality of life. The LQI is formulated as a utility function consistent with the principles of rational decision analysis. The LQI is applied to quantify the societal willingness-to-pay (SWTP) for safety measures enacted to reduce of the risk of potential exposures to ionising radiation. The proposed approach provides essential support to help improve the cost–benefit analysis of engineering safety programs and safety regulations.