Mutagenic consequences of the incorporation of 6-thioguanine into DNA

The stimulatory effect of phytin added to skim milk on acid production of Lactobacillus casei was examined. Phytin stimulated acid production of L. casei fairly well. The stimulatory effect of phytin on acid production was not shown when phytin was treated with Dowex 50 (H+) and neutralized by NaOH solution. The incinerated product of phytin maintained almost equal stimulatory effect on acid production as that before processing. The addition of Mn2+ in the amount contained in a reagent phytin augmented the stimulatory effect on acid production markedly. The further addition of Fe3+, Ca2+, Mg2+ and PO4(3-) in amounts corresponding to their contents in the preparation of phytin as well as Mn2+ increased the effect slightly. The four preparations of phytin contained 0.045-0.20% of Mn, and the greater the Mn content was, the greater the potentiation of acid production.     

The introduction of alkyl,ester, carboxylate,amino, hydroxyl,and phosphate functional groups to the surface of polyethylene

The surface of polyethylene was derivatized with ester, carboxylate, amino, hydroxyl, and phosphate functional groups. α, ω bifunctional alkanes, containing on one end a primary amine, were coupled to oxidized polyethylene through an amide linkage. Polyethylene was first oxidized with chromic acid, the carboxylate groups were converted to the acyl chloride with phosphorus pentachloride, and then reacted with a primary amine to give the covalently bound amide. The copposing ends of the bifunctional alkanes were the methyl, tertiary amine, ester, and hydroxyl groups. The ester was converted to the carboxylate by acid cleavage and the hydroxyl group converted to the phosphate by treatment first with phosphorus oxychloride and then aqueous base. Attenuated total reflection FTIR, XPS, and pH-dependent contact angle wetting were used to characterize the surfaces. The FTIR data were used to confirm the formation of the amide and to detect an undesired carboxylate/ammonium ion complex formed in the presence of trace amounts of water. XPS data were used to confirm expected changes in elemental composition and to provide quantitative estimates of the yields. Oxidation of the polyethylene introduced 5 × 10¹⁴ carboxylate groups/cm² in the 25 Å XPS sampling depth. Of these, up to 98% could be converted to the amide. The advancing contact angle data confirmed the acid/base behavior of the functional groups.     

Word-fragment cuing: The lexical search hypothesis.

In four experiments we evaluated aspects of the hypothesis that word-fragment completion depends on the results of lexical but not semantic search. Experiment 1 showed that the number of meaningful associates linked to a studied word does not affect its recovery when the test cue consists of letters and spaces for missing letters. Experiments 2 and 3 showed retroactive interference effects in fragment completion when words in a second list were lexically related to words in a first list but not when the words in the second list were meaningfully related. Experiment 4 indicated that for studied words, instructions to search at the word level facilitated completion performance and that instructions to generate letters to fill missing spaces had no effect. Other findings indicate that completion was affected by the number of words lexically related to the fragment and by the number of letters missing from the fragment. In general, experimental manipulations that focused on lexical characteristics were effective, and those that focused on semantic characteristics were ineffective. The findings support the conclusion that word fragments engender a lexical search process that does not depend on retrieving encoded meaning. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The Effect of Polymer Optoelectronic Properties on the Performance of Multilayer Hybrid Polymer/TiO2 Solar Cells

We report a study of the effects of polymer optoelectronic properties on the performance of photovoltaic devices consisting of nanocrystalline TiO₂ and a conjugated polymer. Three different poly(2‐methoxy‐5‐(2′‐ethylhexoxy)‐1,4‐phenylenevinylene) (MEH‐PPV)‐based polymers and a fluorene–bithiophene copolymer are compared. We use photoluminescence quenching, time‐of‐flight mobility measurements, and optical spectroscopy to characterize the exciton‐transport, charge‐transport, and light‐harvesting properties, respectively, of the polymers, and correlate these material properties with photovoltaic‐device performance. We find that photocurrent is primarily limited by the photogeneration rate and by the quality of the interfaces, rather than by hole transport in the polymer. We have also studied the photovoltaic performance of these TiO₂/polymer devices as a function of the fabrication route and device design. Including a dip‐coating step before spin‐coating the polymer leads to excellent polymer penetration into highly structured TiO₂ networks, as was confirmed through transient optical measurements of the photoinduced charge‐transfer yield and recombination kinetics. Device performance is further improved for all material combinations studied, by introducing a layer of poly(ethylene dioxythiophene) (PEDOT) doped with poly(styrene sulfonic acid) (PSS) under the top contact. Optimized devices incorporating the additional dip‐coated and PEDOT:PSS layers produced a short‐circuit current density of about 1 mA cm^–2, a fill factor of 0.50, and an open‐circuit voltage of 0.86 V under simulated AM 1.5 illumination (100 mW cm^–2, 1 sun). The corresponding power conversion efficiency under 1 sun was ≥ 0.4 %.     

Transient Green’s Tensor for a Layered Solid Half-Space With Different Interface Conditions

Pulsed ultrasonic techniques can be and have been used to examine the interface conditions of a bonded structure. To provide a theoretical basis for such testing techniques we model the structure as a layer on top of a half-space, both of different elastic properties, with various interface bonding conditions. The exact dynamic Green’s tensor for such a structure is explicitly derived from the three-dimensional equations of motion. The final solution is a series. Each term of the series corresponds to a successive arrival of a “generalized ray” and each is a definite line integral along a fixed path which can be easily computed numerically. Willis’ method is used in the derivation. A new scheme of automatic generation of the arrivals and ray paths using combinatorial analysis, along with the summation of the corresponding products of reflection coefficients is presented. A FORTRAN code is developed for computation of the Green’s tensor when both the source and the detector are located on the top surface. The Green’s tensor is then used to simulate displacements due to pulsed ultrasonic point sources of known time waveform. Results show that the interface bonding conditions have a great influence on the transient displacements. For example, when the interface bonding conditions vary, some of the first few head waves and regular reflected rays change polarities and amplitudes. This phenomenon can be used to infer the quality of the interface bond of materials in ultrasonic nondestructive evaluation. In addition the results are useful in the study of acoustic microscopy probes, coatings, and geo-exploration.     

论网络升级方式与光纤选择的关系

在重点说明影响传输光纤设计的主要问题的同时，简要介绍了各种升级方式所面临的主要技术挑战，并详细说明这些挑战对传输光纤提出的技术要求。     

Detection of hepatitis G virus from serum and liver of a patient with long-term liver dysfunction after autologous bone marrow transplantation

Long-term effects after blood or bone marrow transplantation (BMT) are emerging as an important issue, as more patients are included in BMT programmes and as this procedure becomes more successful. Long-term liver dysfunction, mainly due to chronic graft-versus-host disease or hepatitis C virus infection, is a well-known complication. Nevertheless, the diagnosis of liver disease in this patient group is sometimes difficult and, despite adequate studies, it may remain undetected. A novel hepatitis-associated virus, hepatitis G virus (HGV), has recently been identified. The virus belongs to the Flaviviridae family and is known to be parenterally transmitted, although there is no clear evidence to implicate this agent in causing acute or chronic hepatitis. We report a patient who developed mild, but persistent, abnormalities in transaminases for 2 years after an autologous BMT. HGV RNA was detected in both serum and liver. HGV RNA persisted in serum for at least 8 months. No other known hepatitis virus was found. This report provides the first direct evidence of a patient with long-term liver abnormalities after a BMT in whom the only known hepatitis virus isolated was the HGV.     

The morphology of rigid-rod polymers and molecular composites resulting from coagulation processing

The effects of processing conditions on the morphology of molecular composite films are examined by optical and electron microscopy. During coagulation processing from solutions in methanesulfonic acid (MSA), rigid-rod polymer, such as poly(p-phenylenebenzobisoxazole) (PBO), phase separates into undesirable aggregates. The coagulant and the method of its introduction have been found to exert a strong impact on the final film morphology. A quench of a PBO solution in MSA into a water bath results in a three dimensional interconnected network of PBO, while a slower introduction of water results in a more amorphous material. A computer simulation program of the coagulation process has been developed to better understand the different structures emerging from coagulation processing of molecular composites. The simulation results are in qualitative agreement with the experimental observations.