The teacher's pet phenomenon: Rate of occurrence, correlates, and psychological costs.

The teacher's pet phenomenon was investigated in 80 5th-grade Israeli classrooms. Pets were identified through students' sociometric nominations in 80% of the classrooms: exclusive pets in 26% and unexclusive pets in 54% of the classrooms. Pets tended to be girls rather than boys, of Ashkenazi rather than Sephardi origin, very good (but not necessarily the best) students academically, and perceived as charming, socially skilled, and compliant. Teachers who had pets were found to hold somewhat more authoritarian attitudes than teachers who did not have pets, and the rate of occurrence of the pet phenomenon was higher in religious than in secular schools. Students' affective reactions to their teachers were more positive in classrooms without pets, and most negative in exclusive-pet classrooms. Potential favoritism in assigning teacher grades to exclusive pets was also investigated: No overall favoritism was found, but a trace of favoritism by more authoritarian teachers was discovered. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Forced convection boiling in a microchannel heat sink

Micromachining technology was utilized to fabricate a transparent microchannel heat-sink system by bonding glass to a silicon wafer. The micro heat sink consisted of a microchannel array, a heater, and a temperature sensor array. This integrated microsystem allowed simultaneous qualitative visualizations of the flow pattern within the microchannels and quantitative measurements of temperature distributions, flow rates, and input power levels. Boiling curves of temperature as a function of the input power were established. No boiling plateau was observed in the boiling curves, consistent with our previously reported data but different from results reported for macrochannel heat sinks. Three stable boiling modes, depending on the input power level, have been distinguished from the flow patterns. Local nucleation boiling was observed in microchannels with a hydraulic diameter as small as 26 μm at the lower input power range. At the higher input power range, a stable annular flow was the dominant boiling mode. Bubbly flow, commonly observed in macrochannels, could not be developed in the present microchannels. Consequently, no boiling plateau was detected in the boiling curves     

用低温金属电镀技术制造与封装的惯性微型电学开关

运用光刻胶为注模的多次互不干扰金属电镀技术实现了惯性微型电学开关的低温制造与封装.电镀技术的低温过程可使微型开关直接成形于预先制作好的含有电子信号处理电路的基底上,加上同样借助于低温金属电镀技术的基于整个硅晶片的倒装封装,直接形成环绕各个器件的密封腔体.这一技术最终将使得模块化生产成为现实.微型开关的高度和它的密封腔的高度可以分别控制.电子信号可以通过金属互连线进入密封腔体.为了便于设计,建立了一个既简单又相对准确的"弹簧-质量块"模型.以此设计的惯性开关,即使在未封装的常温、常压条件下,均可工作109次以上.本文对密封腔体的强度和密封性,以及金属互连线的可靠性,都作了详细的检测,各项指标均达到其各自的标准.     

Modifying supervisory practices to improve subunit safety: A leadership-based intervention model.

This article presents a leadership-based intervention model designed to modify supervisory monitoring and rewarding of subordinates' safety performance. Line supervisors received weekly feedback based on repeated episodic interviews with subordinates concerning the cumulative frequency of their safety-oriented interactions. This information identified the priority of safety over competing goals such as speed or schedules. Section managers received the same information and used it to communicate (high) safety priority. They also were trained to conduct episodic interviews to provide intermittent feedback after intervention, turning safety priority into an explicit performance goal. Safety-oriented interaction increased significantly in the experimental groups but remained unchanged in the control groups. This change in safety-oriented interaction was accompanied by significant (and stable) changes in minor injury rate, earplug use, and safety climate scores during the postintervention period. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Particle aggregation rate in a microchannel due to a dilute suspension flow

Particle-laden flow in a microchannel results in cluster formation and growth on the channel surface and the cluster growth, due to aggregation of polystyrene microparticles, has been investigated in this study. In particular, the initial stage of cluster growth is examined, where particle–cluster interaction is the dominant growth mechanism. Both experimental measurements and theoretical considerations were utilized to explore the functional dependence of the cluster growth rate on the following parameters: suspension void fraction, flow shear strain rate, and channel-height to particle-diameter ratio. The growth rate of an average cluster is found to increase linearly with suspension void fraction which is consistent with previous reports. The growth rate coefficient is found to obey a power-law relationship with respect to the shear strain rate, and predictions based on the modernized flocculation theory agree well with the experimental results. Furthermore, the growth rate coefficient obeys a power-law relationship with respect to the channel-height to particle-diameter ratio as well, qualitatively similar to other reported studies. However, to our knowledge, the exponent value estimated in this study does not agree with any previously published values; this disagreement is likely due to differences in experimental conditions.     

A failure criterion for brittle elastic materials under mixed-mode loading

The failure criterion of Leguillon at reentrant corners in brittle elastic materials (Leguillon 2002, Eur J Mech A/Solids 21: 61–72; Leguillon et al. (2003), Eur J Mech A—Solids 22(4): 509–524) validated in (Yosibash et al. 2004, Int J Fract 125(3–4): 307–333) for mode I loading is being extended to mixed mode loading and is being validated by experimental observations. We present an explicit derivation of all quantities involved in the computation of the failure criterion. The failure criterion is validated by predicting the critical load and crack initiation angle of specimens under mixed mode loading and comparison to experimental observations on PMMA (polymer) and Macor (ceramic) V-notched specimens.     

Cell Identification Codes for Tracking Mobile Users

The minimization of the wireless cost of tracking mobile users is a crucial issue in wireless networks. Some of the previous strategies addressing this issue leave an open gap, by requiring the use of information that is not generally available to the user (for example, the distance traveled by the user). For this reason, both the implementation of some of these strategies and the performance comparison to existing strategies is not clear. In this work we propose to close this gap by the use of Cell Identification Codes (CIC) for tracking mobile users. Each cell periodically broadcasts a short message which identifies the cell and its orientation relatively to other cells in the network. This information is used by the users to efficiently update their location. We propose several cell identification encoding schemes, which are used to implement different tracking strategies, and analyze the amount of information required by each tracking strategy. One of our major results is that there is no need to transmit a code which is unique for each cell. For example, a 3 bits CIC is sufficient to implement a distance-based tracking strategy in a two-dimensional system. In addition, we propose a combination of timer and movement tracking strategy, based on either a one-bit or a two-bit CIC, depending on system topology and user mobility. An important property of our framework is that the overall performance cost, and hence its comparison to existing methods, is evaluated for each tracking strategy. The CIC-based strategies are shown to outperform the geographic-based method currently used in existing networks, and the timer-based method, over a wide range of parameters. Moreover, this superiority increases as the number of users per cell increases.     

Edge Stress Intensity Functions in Polyhedral Domains and their Extraction by a Quasidual Function Method

The solution to elastic isotropic problems in three-dimensional (3-D) polyhedral domains in the vicinity of an edge is provided in an explicit form. It involves a family of eigen-functions with their shadows, and the associated edge stress intensity functions (ESIFs), which are functions along the edges. Utilizing the explicit structure of the solution in the vicinity of the edge we use the quasidual function method, recently presented in [Omer et al. (2004). International Journal of Fracture 129:97–130] for scalar elliptic problems and in [Costabel et al. (2004). SIAM Journal of Mathematical Analysis 35(5), 1177–1202] in a general theoretical framework, for the extraction of ESIFs. This method provides a polynomial approximation of the ESIF along the edge whose order is adaptively increased so to approximate the exact ESIF. It is implemented as a post-solution operation in conjunction with the p-version finite element method. Numerical examples are provided in which we extract ESIFs associated with traction free or homogeneous Dirichlet boundary conditions in 3-D cracked domains or 3-D V-Notched domains. These demonstrate the efficiency, robustness and high accuracy of the proposed quasi-dual function method.