Multiframe error concealment for MPEG-coded video delivery over error-prone networks

Compressed video sequences are very vulnerable to channel disturbances when they are transmitted through an unreliable medium such as a wireless channel. Transmission errors not only corrupt the current decoded frame, but they may also propagate to succeeding frames. A number of post-processing error concealment (ECN) methods that exploit the spatial and/or temporal redundancy in the video signal have been proposed to combat channel disturbances. Although these approaches can effectively conceal lost or erroneous macroblocks (MBs), all of them only consider spatial and/or temporal correlation in a single frame (the corrupted one), which limits their ability to obtain an optimal recovery. Since the error propagates to the next few motion-compensated frames in the presence of lost MBs in an I or P frame, error concealment should simultaneously minimize the errors not only in the current decoded frame but also in the succeeding B and P frames that depend on the corrupted frame. We propose a novel multiframe recovery principle which analyzes the propagation of a lost MB into succeeding frames. Then, MPEG-compatible spatial and temporal error concealment approaches using this multiframe recovery principle are proposed, where the lost MBs are recovered in such a way that the error propagation is minimized.     

The effect of inorganic salts on the activated sludge process performance

The effect of inorganic salts such as sodium chloride and sodium sulfate on the performance of the activated sludge process was examined. When proper acclimation procedures were followed, the adverse effects of salts on the process were minimized. One of the parameters monitored, effluent suspended solids, had very low values (less than 10 mg l⁻¹) up to an inflow sodium chloride concentration of about less than 35 gl⁻¹. The chemical oxygen demand of the effluent increased steadily with increasing sodium chloride concentrations, but biochemical oxygen demand values remained very low (less than 5 mg l⁻¹) which indicated that the increase in chemical oxygen demand was due to the portion that cannot be degrated biologically. The effect of sodium sulfate on the system was even less profound. In addition to the effluent being very clear and low in suspended solids, the chemical oxygen demand removal efficiency remained high.     

Deposition and Characterization of Tungsten Carbide Thin Films by DC Magnetron Sputtering for Wear-Resistant Applications

In this study, WC (tungsten carbide) thin films were deposited on high-speed steel (AISI M2) and Si (100) substrates by direct current magnetron sputtering of a tungsten carbide target having 7% cobalt as binding material. The properties of the coatings have been modified by the change in the bias voltages from grounded to 200 V. All the coatings were deposited at 250°C constant temperature. The microstructure and the thickness of the films were determined from cross-sectional field-emission gun scanning electron microscope micrographs. The chemical composition of the film was determined by electron probe micro analyzer. The x-ray diffractometer has been used for the phase analyses. Nanoindentation and wear tests were used to determine the mechanical and tribological properties of the films, respectively. It is found that the increase in the bias voltages increased drastically the hardness and elastic modulus, decreased the friction coefficient values and increased the wear resistance of tungsten carbide thin films by a phase transformation from metallic W (tungsten) to a nonstoichiometric WC_1?x (tungsten carbide) phase.     

Effects of cavity disinfectants on bond strength of an etch-and-rinse adhesive to water- or ethanol-saturated sound and caries-affected dentin

Objective: To evaluate the effect of cavity disinfectants on the immediate microtensile bond strength (μTBS) of an etch-and-rinse adhesive to water- and ethanol-saturated sound and caries-affected dentin (CAD). Material and Methods: Thirty-six human molars were sectioned to expose 1/3 of the mid-coronal dentin surface. Sound (n = 18) and CAD (n = 18) specimens were divided into six groups each (n = 3): one positive control (sound), one negative control (CAD), and five experimental groups each. In the control group, dentin surfaces were bonded using an etch-and-rinse adhesive with a traditional water-wet bonding technique. In the experimental groups, ozone was applied before etching and chlorhexidine after etching. In the ethanol-wet bonding groups, acid-etched dentin surfaces were treated with ethanol. Following adhesive application and composite buildups, bonded specimens were sectioned to form sticks. Failure modes were analyzed using a stereomicroscope. Results: The water-wet bonded sound control group yielded the highest μTBS among all groups (p < 0.001). The lowest μTBS values were observed in the ozone groups (p < 0.05). The ethanol-wet bonded CAD group exhibited a higher μTBS than the water-wet bonded negative controls. Although compared to the positive control, chlorhexidine decreased the μTBS (p < 0.05), an increase with no significant difference was observed in the negative control (p > 0.05). Conclusions: The μTBS values of CAD were lower than those of sound dentin. Ethanol-wet bonding improved the μTBS of CAD. Ozone application reduced the μTBS in both sound and CAD; chlorhexidine improved the immediate μTBS after etching in CAD.     

Determination of the Optimum NiS Fire Assay Parameters for Pt,Pd, and Rh in Automotive Exhaust Catalytic Converters

This work investigates the performance of the nickel sulfide fire assay (NiS-FA) for the pyrometallurgical analysis of platinum group elements (PGEs) from mixtures of automotive exhaust catalytic converters (e.g., gasoline, diesel, and diesel particular filter) by assessing the effects of various flux materials and reaction parameters on platinum, palladium, and rhodium recovery. Inductively coupled plasma mass spectrometry and atomic absorption spectroscopy (AAS) are used for the analysis of the NiS-FA beads. We found that the optimum recovery (at least 99.0%) was achieved with reaction of 11.5 g of flux (0.53 w/w ratio, sodium tetraborate:sodium carbonate), 1 g nickel, and 0.84 g sulfur (1.2 w/w ratio, Ni:S) per gram of sample for 90 min at 975°C. Reference standards (NIST SRM 2557) were used to compare efficiencies and identify the optimum conditions. The results are consistent with certified values and PGEs could be recovered within the 95% confidence level. The precision (<4.0% RSD) of all measurements, expressed as percentage relative standard deviation (SD), ranged up to 3.0%.     

Al–Ti–B grain refiners via powder metallurgy processing of Al/K2TiF6/KBF4 powder blends

The response to thermal exposure of ball-milled Al/K₂TiF₆/KBF₄ powder blends was investigated to explore the potential of PM processing for the manufacture of Al–Ti–B alloys. K₂TiF₆ starts to be reduced by aluminium as early as 220 °C when ball-milled Al/K₂TiF₆/KBF₄ powder blends are heated. The reaction of KBF₄ with aluminium follows soon after. The Ti and B thus produced are both solutionized in aluminium before precipitating out as Al₃Ti and TiB₂. All these reactions take place below the melting point of aluminium. The ball-milled Al/K₂TiF₆/KBF₄ powder blends heat treated at approximately 525 °C can be compacted to produce Al–Ti–B pellets with in situ formed Al₃Ti and TiB₂ particles. These pellets are shown to be adequate grain refiners for aluminium alloys.     

Analysis of macro segregation in twin-roll cast aluminium strips via solidification curves

A porous NiO/yttria-stabilized zirconia (YSZ) anode substrate for zirconia-based tubular solid oxide fuel cells (SOFCs) was prepared by the gelcasting. The effect of the impregnation of SDC in the substrate was studied. Electrochemical impedance spectroscopy and I–V and I–P curves of the cells were measured. Scanning electron microscopy (SEM) was used to observe the microstructures. The results indicate that the performance of the cell can be significantly improved by incorporating the nano-structured SDC particles in the substrate. The peak power density of the cell is increased by about 60% and the area specific resistance (ASR) decreased by about 47% at 700 °C, compared with the unmodified cells. It is explained as the extended triple-phase boundary (TPB) in the anode substrate and the excellent electrocatalytic property of SDC. It is also found that the nano-scale SDC particles change a lot during the reduction of the anode substrate, and the morphology of the resultant SDC particles on the metal Ni is significantly different from that on the YSZ. After the long-term operation, the morphology of the SDC particles on the Ni changes again, but that on the YSZ keeps almost unchanged.     

Injectable solid hydrogel: mechanism of shear-thinning and immediate recovery of injectable β-hairpin peptide hydrogels

β-Hairpin peptide-based hydrogels are a class of injectable hydrogel solids with significant potential use in injectable therapies. β-hairpin peptide hydrogels can be injected as preformed solids, because the solid gel can shear-thin and consequently flow under a proper shear stress but immediately recover back into a solid on removal of the stress. In this work, hydrogel behavior during and after flow was studied in order to facilitate fundamental understanding of how the gels flow during shear-thinning and how they quickly recover mechanically and morphologically relative to their original, pre-flow properties. While all studied β-hairpin hydrogels shear-thin and recover, the duration of shear and the strain rate affected both the gel stiffness immediately recovered after flow and the ultimate stiffness obtained after complete rehealing of the gel. Results of structural analysis during flow were related to bulk rheological behavior and indicated gel network fracture into large (>200 nm) hydrogel domains during flow. After cessation of flow the large hydrogel domains are immediately percolated which immediately reforms the solid hydrogel. The underlying mechanisms of the gel shear-thinning and healing processes are discussed relative to other shear-responsive networks like colloidal gels and micellar solutions.     

Super-resolution reconstruction of compressed video using transform-domain statistics

Considerable attention has been directed to the problem of producing high-resolution video and still images from multiple low-resolution images. This multiframe reconstruction, also known as super-resolution reconstruction, is beginning to be applied to compressed video. Super-resolution techniques that have been designed for raw (i.e., uncompressed) video may not be effective when applied to compressed video because they do not incorporate the compression process into their models. The compression process introduces quantization error, which is the dominant source of error in some cases. In this paper, we propose a stochastic framework where quantization information as well as other statistical information about additive noise and image prior can be utilized effectively.