岩电实验饱和度模型在探明储量中的应用

合油饱和度是评价砂岩油气层最主要的参数。确定合油饱和度的方法较多，确定储层原始合油饱和度的方法主要有直接法和间接法，直接法是指应用密闭取心或油基泥浆取心井获得的资料，通过实验室分析直接获得原始合油饱和度的方法；间接法是指应用测井曲线、毛管压力曲线、类比等资料间接获得原始含油饱和度。阿尔奇公式是测井定量解释饱和度的理论基础。在实验室条件下，通过作模拟地层条件下的岩电实验，取得地层的真电阻率，对深侧向视电阻率进行厚度校正，建立正确的饱和度解释模型，使岩电实验所建立的饱和度模型在探明储量中得到了广泛的应用。     

反应器和钢烟囱整体吊装的难点和对策

介绍了在金陵石化炼油厂200万t/a柴油加氢装置建设中,将质量为237t的反应器和高60m的钢烟囱成功进行整体吊装过程中的关键技术.通过此项工程实践得出以下结论象钢烟囱这样细长重物的整体吊装,由两台吊车抬立起后,再由主吊车独立吊装就位的施工方法简单易行,安全可靠,应用范围广;结构复杂细长杆的吊装强度和挠度计算比较复杂,在计算过程中可以忽略部分次要件的质量,分别以两吊点为支点计算上下吊点所受的力,然后再按比例放余量,使两吊点受力之和等于细长杆的重力,计算挠度时,可以适当地把问题夸大化,从而建立近似的力学模型;高压厚壁重型容器的吊装,宜直接设置专门吊盖与大法兰用螺栓把紧起吊;施工现场地基坚实是保证吊车站位和吊装施工的前提条件.     

Simulating a Smartboard by Real-Time Gesture Detection in Lecture Videos

Gesture plays an important role for recognizing lecture activities in video content analysis. In this paper, we propose a real-time gesture detection algorithm by integrating cues from visual, speech and electronic slides. In contrast to the conventional “complete gesture” recognition, we emphasize detection by the prediction from “incomplete gesture”. Specifically, intentional gestures are predicted by the modified hidden Markov model (HMM) which can recognize incomplete gestures before the whole gesture paths are observed. The multimodal correspondence between speech and gesture is exploited to increase the accuracy and responsiveness of gesture detection. In lecture presentation, this algorithm enables the on-the-fly editing of lecture slides by simulating appropriate camera motion to highlight the intention and flow of lecturing. We develop a real-time application, namely simulated smartboard, and demonstrate the feasibility of our prediction algorithm using hand gesture and laser pen with simple setup without involving expensive hardware.      

Estimation for the number of components in a mixture model using stepwise split-and-merge EM algorithm

The main difficulty with EM algorithm for mixture model concerns the number of components, say g. This is the question of model selection, and the EM algorithm itself could not estimate g. On the contrary, the algorithm requires g to be specified before the remaining parameters can be estimated. To solve this problem, a new algorithm, which is called stepwise split-and-merge EM (SSMEM) algorithm, is proposed. The SSMEM algorithm alternately splits and merges components, estimating g and other parameters of components simultaneously. Also, two novel criteria are introduced to efficiently select the components for split or merge. Experimental results on simulated and real data demonstrate the effectivity of the proposed algorithm.     

绿色易切削无铅黄铜棒的研制

铅黄铜广泛应用于水暖卫浴领域，但铅易溶出造成污染。我公司开发研制的HB-20易切削无铅黄铜棒，用铋元素替代铅黄铜中的铅元素，既能达到铅黄铜棒的切削性能和机械性能，又能达到水暖卫浴行业的环保要求。     

提高信号设备运用质量 促进管理进步

本文运用全面质量管理的方法，对设备故障进行分析，提出预防措施，降低设备故障率，进而取消值班制实现减人增效、系统降本。     

直流法测量钯氢化物电极电阻时的阻值偏移

讨论了直流法在线测量钯氢化物电极电阻时的电化学效应，计算了电解液的共导、测量电流与电解电流引起的浓差电池效应以及电极作为集流体引起的电阻贡献。结果表明：当电极具有高的长度与半径比值、粗糙的表面、高的溶液电导以及大的电解电流时容易引起显著的附加电阻。     

稀土改善09CuPTiRE耐候钢耐蚀性的作用机理

应用扫描电镜(SEM)、离子探针(IMA)、X射线光电子能谱(XPS)和交流阻抗法研究含不同稀土耐候钢稀土提高耐大气腐蚀作用机理。结果表明,合适的稀土含量可显著提高钢的耐腐蚀性,稀土能促进Si、Cu和P在内锈层中以Si~(4+)、Cu~+和P~(5+)形态富集,并观察到锈层中的稀土。钢中加入稀土形成了致密连续厚而粘附性好的含硅铜稀土的复合铁锈层,从而提高了抗大气腐蚀性能。     

普适定常流内可逆制冷机循环模型的炯经济性能优化

用有限时间热力学方法分析工作在恒温热源TH、TL之间内可逆普适制冷机循环模型的炯经济性能，导出循环利润率与工质温比、制冷系数与工质温比的关系式，和利润率与制冷系数的特性关系。所得结果包含了内可逆Carnot、Diesel、Otto、Atkinson和Brayton制冷循环的有限时间炯经济性能。