Solution structure of glutathione bound to human glutathione transferase P1-1: comparison of NMR measurements with the crystal structure

The conformation of the bound glutathione (GSH) in the active site of the human glutathione transferase P1-1 (EC 2.5.1.18) has been studied by transferred NOE measurements and compared with those obtained by X-ray diffraction data. Two-dimensional TRNOESY and TRROESY experiments have been performed under fast-exchange conditions. The family of GSH conformers, compatible with TRNOE distance constraints, shows a backbone structure very similar to the crystal model. Interesting differences have been found in the side chain regions. After restrained energy minimization of a representative NMR conformer in the active site, the sulfur atom is not found in hydrogen-bonding distance of the hydroxyl group of Tyr 7. This situation is similar to the one observed in an "atypical" crystal complex grown at low pH and low temperature. The NMR conformers display also a poorly defined structure of the glutamyl moiety, and the presence of an unexpected intermolecular NOE could indicate a different interaction of this substrate portion with the G-site. The NMR data seem to provide a snapshot of GSH in a precomplex where the GSH glutamyl end is bound in a different fashion. The existence of this precomplex is supported by pre-steady-state kinetic experiments [Caccuri, A. M., Lo Bello, M., Nuccetelli, M., Nicotra, M., Rossi, P., Antonini, G., Federici, G., and Ricci, G. (1998) Biochemistry 37, 3028-3034] and preliminary time-resolved fluorescence data.     

Speech perception performance in experienced cochlear-implant patients receiving the SPEAK processing strategy in the Nucleus Spectra-22 cochlear implant

Sixteen experienced cochlear implant patients with a wide range of speech-perception abilities received the SPEAK processing strategy in the Nucleus Spectra-22 cochlear implant. Speech perception was assessed in quiet and in noise with SPEAK and with the patients' previous strategies (for most, Multipeak) at the study onset, as well as after using SPEAK for 6 months. Comparisons were made within and across the two test sessions to elucidate possible learning effects. Patients were also asked to rate the strategies on seven speech recognition and sound quality scales. After 6 months' experience with SPEAK, patients showed significantly improved mean performance on a range of speech recognition measures in quiet and noise. When mean subjective ratings were compared over time there were no significant differences noted between strategies. However, many individuals rated the SPEAK strategy better for two or more of the seven subjective measures. Ratings for "appreciation of music" and "quality of my own voice" in particular were generally higher for SPEAK. Improvements were realized by patients with a wide range of speech perception abilities, including those with little or no open-set speech recognition.     

Multidimensionality of oral health in dentate adults

OBJECTIVES: An understanding of the validity and usefulness of self-reported measures (as distinct from clinically determined measures) of oral health is emerging. These self-reported measures include self-rated oral health (SROH). Three objectives were to: (1) describe self-rated oral health in dentate adults, (2) quantify associations between self-rated oral health and other measures of oral health (oral disease and tissue damage, pain and discomfort, functional limitation, and disadvantage), and (3) assess the construct validity of a model of oral health proposed herein. METHODS: The Florida Dental Care Study is a longitudinal study of oral health, which included at baseline 873 subjects who had at least one tooth, were 45 years or older, and who participated for an interview and clinical examination. RESULTS: The prevalence of self-rated oral health decrements was substantial; approximately one fourth of subjects reported their oral health as only fair or poor. Bivariate and multivariate results provided consistent evidence of the construct validity of the proposed model of oral health. Additionally, the salience of one measure of dental appearance suggests that persons may use esthetic cues when rating their oral health. CONCLUSIONS: The proposed multidimensional model of oral health has construct validity. Self-rated oral health is affected by oral disease and tissue damage, oral pain and discomfort, oral functional limitation, and oral disadvantage. These self-reported measures and the proposed model should provide useful information for dental care effectiveness research. General health status has been disaggregated into the "physical" and the "mental;" an additional separation into the "oral" aspects of health seems warranted.     

Effect of fenfluramine on food intake, mood, and performance of humans living in a residential laboratory

Five male and four female normal weight research volunteers, participating in 13-day residential studies, received oral fenfluramine (20, 40 mg) or placebo at 09:30 and 17:00. Food intake, performance, and subjective ratings were measured throughout the day. Carbohydrate intake was manipulated by providing lunch meals high (males: 120 g; females: 80 g) or low (males: 25 g; females: 16 g) in carbohydrate on 8 days; on the remaining days subjects self-selected lunch. Total caloric intake (approximately 2800 Kcal) did not differ among the low- and high-carbohydrate, and self-selected lunch conditions when subjects received placebo, indicating caloric compensation. Total carbohydrate intake was significantly less, however, when subjects consumed the low-carbohydrate lunch compared to the other lunch conditions. Fenfluramine significantly decreased total caloric intake (approximately 500 kcal) by decreasing meal size, not number, only when subjects consumed the low-carbohydrate lunch. Fenfluramine was only an effective anorectic drug when subjects consumed a lunch with fewer calories and a lower carbohydrate:protein ratio than self-selected baseline. Also, fenfluramine improved performance on a range of computer tasks and increased ratings of "Alert," "Friendly," and "Talkative," while decreasing ratings of "Tired" and "Irritable."     

Fast transmission CT for determining attenuation maps using a collimated line source, rotatable air-copper-lead attenuators and fan-beam collimation

We describe a technique using a line source and a rotatable air-copper-lead assembly to acquire gamma transmission computed tomographic (TCT) data for determining attenuation maps to compensate SPECT emission scans. The technique minimizes problems associated with discriminating 99mTc transmission and 201Tl emission photons and requires only a modest increase in total study time. A 99mTc line source and a stacked foil ("multislat") collimator are placed near the focal line of a fan-beam collimator (114 cm focal length) mounted on one detector of a triple-camera SPECT system. We acquired TCT data of plastic rod and anthropomorphic thorax phantoms to investigate the capability of the line source and rotatable air-copper-lead attenuators to determine attenuation maps. The data were acquired with and without 5.4 MBq (145 microCi) of 201Tl placed in the myocardial chamber of the thorax phantom. Phantoms also were scanned using a curved transmission slab source mounted to a parallel-hole collimator. Fan-beam TCT images have improved resolution compared with parallel-beam TCT images. Two patient scans also were performed to evaluate the clinical usefulness of fan-beam TCT. The rotatable air-copper-lead attenuator method eliminates contamination of emission data by transmission photons and reduces spill-over of emission data into the transmission energy window for some cases. Results show the feasibility of using fast, sequential or interlaced transmission scans of a line source within a rotatable air-copper-lead attenuator assembly to obtain accurate attenuation maps for SPECT attenuation compensation.     

Three Dimensional Conceptualisation of Hydrogeological Environment to Underpin Groundwater Management in Irrigation Area

Australian irrigated agriculture utilises about 70?% of all water used in the country, 21?% of which is derived from groundwater. Sustainability for irrigated agriculture also depends on keeping the watertables at a safe level below the rootzone to avoid salinisation and reduction in crop yields. There is a vital need to understand groundwater and aquifer systems and their roles in the sustainability of irrigated agriculture in order to manage groundwater properly. This study builds on the previous hydrogeological and groundwater investigations of the Coleambally Irrigation Area (CIA) in New South Wales of Australia. It presents a new approach which systematically characterises regional hydrogeological environment using a three-dimensional (3-D) conceptual framework developed in ArcGIS. The 3-D hydrological conceptualisation of the CIA has integrated disparate sources of data into a coherent knowledge base for a better visualisation of hydrogeological characteristics and a comprehensive analysis of groundwater flow and aquifers. As an application example, the model was used to develop cross-sectional models of the area and to estimate regional-scale net recharge. The results have provided a basis for the numerical modelling and added values to procedures which underpin irrigation system management investment decisions through improving the understanding of hydrogeology underlying the area and creating an action-oriented dialogue among stakeholders.     

Effects of silver nanoparticles on thermal properties of DBSA-doped polyaniline/PVC blends

Dodecylbenzenesulfonic acid (DBSA)-doped polyaniline (PAND) has been synthesized by redoping (PANDR) and aqueous polymerization (PANDA) methods. Silver nanoparticles were incorporated into the PANDR/tetrahydrofuran solution (PANDS) and then mixed with poly (vinyl chloride) (PVC) solution to prepare PANDS/PVC nanocomposites. In the present study, effects of silver nanoparticles on thermal properties of PAND/PVC blends have been investigated by employing thermal gravimetric analysis and heat flow microcalorimetry techniques. From these results it has been observed that the thermal stability of blends have increased by increasing the concentration of PAND in blends and nanocomposites. Addition of silver nanoparticles has suppressed the dehydrochlorination process and evolution/degradation of DBSA in PANDS/PVC nanocomposites. Presence of silver nanoparticles in PAND/PVC nanocomposites has reduced the mobility of PANI chains which in turn inhibited the transfer of free radicals formed during degradation of PAND and PVC through inter-chain reactions; hence, degradation process has been slowed down and thermal stability has been improved. Embedment of silver nanoparticles has reduced thermal weight loss corresponding to polymer degradation step and attains lower heat flow level in inert atmosphere for nanocomposites in contrast to those with no nanoparticles, thereby further improving thermal stability of nanocomposites. The heats of oxidation measured for blends and nanocomposites were independent of PAND/PVC blends composition.     

An acidic ionic liquid-conventional alkali-catalyzed biodiesel production process

A study was undertaken to prepare biodiesel via two-step process using ionic liquid as first step catalyst due to the unsuitability of using the straight alkaline-catalyzed transesterification of high FFA presented in crude palm oil (CPO). In the first step, esterification of the FFA presented in the CPO was carried out using butylimidazolium hydrogen sulfate (BIMHSO₄), in which the acid value was reduced from 6.93 to 1.02mg KOH/g and then, KOH-catalyzed transesterification was applied. The conversion rate of FFA attained 85.3% when 4.8 wt% of BIMHSO₄ was applied to the reaction system containing methanol to CPO ratio of 12: 1 reacted at 170 °C for 150min. The final yield in 97.3% revealed that the process proposed in this study could lead to an excellent biodiesel meeting the ASTM requirements. Furthermore, this new two-step catalysis process could solve the old conventional catalysis process drawbacks.     

Laser machining of different diameter holes in alumina ceramic: Thermal stress analysis

Laser machining of different diameter holes into alumina tiles is carried out. Temperature and stress fields are predicted by using the finite element code. Surface temperature and residual stress predictions are validated through the thermocouple data and X-ray diffraction measurements. Morphological changes in the cutting section are examined by incorporating optical and scanning electron microscopes. It is found that the predictions of surface temperature and the residual stress formed at the cut section agree well with the experimental findings. In general, cut sections are free from large asperities; however, local dross attachments at the kerf edge and crack network formation at the kerf surface are observed.     

Characterization of Ceramic Foam Filters Used for Liquid Metal Filtration

In the current study, the morphology including tortuosity, and the permeability of 50-mm thick commercially available 30, 40, 50, and 80 pores per inch (PPI) alumina ceramic foam filters (CFFs) have been investigated. Measurements have been taken of cell (pore), window, and strut sizes, porosity, tortuosity, and liquid permeability. Water velocities from ~0.015 to 0.77 m/s have been used to derive both first-order (Darcy) and second-order (Non-Darcy) terms for being used with the Forchheimer equation. Measurements were made using 49-mm “straight through” and 101-mm diameter “expanding flow field” designs. Results from the two designs are compared with calculations made using COMSOL 4.2a^® 2D axial symmetric finite element modeling (FEM), as a function of velocity and filter PPI. Permeability results are correlated using directly measurable parameters and compared with the previously published results. Development of improved wall sealing (49 mm) and elimination of wall effects (101 mm) have led to a high level of agreement between experimental, analytic, and FEM methods (±0 to 7 pct on predicted pressure drop) for both types of experiments. Tortuosity has been determined by two inductive methods, one using cold-solidified samples at 60 kHz and the other using liquid metal at 50 Hz, giving comparable results.