Impact of oxygen transport properties on the kinetic modeling of polypropylene thermal oxidation. II. Effect of oxygen diffusivity

The kinetic model, established in a previous article (François‐Heude et al., J. Appl. Polym. Sci., in press) to predict the homogeneous oxidation in iPP films typically thinner than 100 µm, is now extended to simulate the oxidation profiles in thicker plates by coupling the oxygen diffusion and its consumption by the chemical reactions. In this perspective, oxygen transport properties (namely oxygen solubility, diffusivity, and permeability) are measured by permeametry on a reference iPP. These values are compared with an exhaustive compilation of literature data to evaluate their variability among the whole iPP family, which one has been reasonably ascribed to initial differences in polymer morphology, but also to evaluate their consistency, especially their temperature dependence between 20 and 140°C. Failing to simulate oxidation profiles, the kinetic model is then used as an inverse resolution method for estimating more satisfactory values of oxygen transport properties. It is thus evidenced that the crystallinity changes induced by thermal oxidation largely explains the dramatic decrease in oxygen penetration toward the sample core just after the induction period. A strategy aimed for introducing the relationship between the polymer crystalline morphology and oxygen transport properties into the kinetic model is given in the graphical abstract, although the effect of polymer polarity remains to be established prior to this implementation. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41562.     

Time‐space PGD for the rapid solution of 3D nonlinear parametrized problems in the many‐query context

This work deals with the question of the resolution of nonlinear problems for many different configurations in order to build a ‘virtual chart’ of solutions. The targeted problems are three‐dimensional structures driven by Chaboche‐type elastic‐viscoplastic constitutive laws. In this context, parametric analysis can lead to highly expensive computations when using a direct treatment. As an alternative, we present a technique based on the use of the time‐space proper generalized decomposition in the framework of the LATIN method. To speed up the calculations in the parametrized context, we use the fact that at each iteration of the LATIN method, an approximation over the entire time‐space domain is available. Then, a global reduced‐order basis is generated, reused and eventually enriched, by treating, one‐by‐one, all the various parameter sets. The novelty of the current paper is to develop a strategy that uses the reduced‐order basis for any new set of parameters as an initialization for the iterative procedure. The reduced‐order basis, which has been built for a set of parameters, is reused to build a first approximation of the solution for another set of parameters. An error indicator allows adding new functions to the basis only if necessary. The gain of this strategy for studying the influence of material or loading variability reaches the order of 25 in the industrial examples that are presented. Copyright © 2015 John Wiley & Sons, Ltd.     

Les glissements de terrain du quartier Bélouizdad, Constantine, Algérie

In Constantine, Belouizdad district landslides are extensive (Fig. 1). They occur along a hillside largely urbanized, and cover over 30 hectares. Dozens of houses were destroyed. The formations raised by these movements correspond to the alternating of thick Miocene clays and conglomerates. These contain several aquifers. The study of these landslides is conducted on the basis of recognition by deep boreholes equipped with piezometers and inclinometers. The inclinometric measurements have revealed failure surfaces sometimes deep (20 to 30 m) and north displacement, towards the Rhumel wadi. The use of a stability calculation software “Talren” shows on the one hand, the high sensitivity of unstable Miocene formations in the presence of water and on the other hand, a significant revival of the safety factor by reducing the pore pressure. The recommended solutions are therefore a lowering of underground water levels. Two techniques are recommended : deep drainage trench or galleries combined with radiating drainage holes.     

Densification of 8Y‐Tetragonal‐Stabilized Zirconia Optoceramics with Improved Optical Properties by Y Segregation

8% Yttria‐stabilized zironcia (8YSZ) transparent ceramics have a wide technological applications. Segregation of the Y around the grain boundaries is favored by slow heating rate. The optimized sintering parameters helped in obtaining transparent ceramics of 8YSZ with a high percentage of cubic phase in addition to the presence of tetragonal phase. HRTEM was used to verify the grain growth suppression and to observe the presence of the cubic phase. The presence of cubic phase has suppressed the grain growth, which increased the transparency in the visible and infrared region without the addition of dopants or by utilizing high pressure.     

Study of effect of old corrugated cardboard in properties of polypropylene composites: Study of mechanical properties,thermal behavior,and morphological properties

The investigation of the economical use of lignocellulose waste, which is one of the environmental problems facing nations, is ongoing. In this study, waste cardboard paper fiber reinforcing polypropylene (PP) composites was developed. In order to modify the PP matrix maleated PP (MA‐g‐PP) a 5 wt% and a grafting rate of 1 and 2 wt% was used as a compatibilizer. The effects of fiber and compatibilizer content as well as graft content are evaluated by mechanical, thermal property measurements, and scanning electron microscopy (SEM). The compatibilizer improved all mechanical properties significantly. Thus, the tensile strength of MA‐g‐PP‐containing composites increases compared to PP/cardboard composites paper content increases. However, the tensile modulus of a PP‐based composite increases with an increase in paper fiber with the compatibilizer having little effect. SEM revealed that the addition of MA‐g‐PP generates strong interactions between a PP matrix and paper fibers. However, the addition of the MA‐g‐PP compatibilizing agent gives a significant improvement on the crystallization of the composites, whereas the compatibilized PP/old corrugated cardboard (OCC) composites have higher crystallinity (Xc) than uncompatibilized PP/OCC composites. The MA‐g‐PP also diminished the water absorption in the composites. J. VINYL ADDIT. TECHNOL., 22:231–238, 2016. © 2014 Society of Plastics Engineers     

Effect of Thermomechanical Fatigue on Precipitation Microstructure in Two Precipitation-Hardened Cast Aluminum Alloys

Thermal loading induces modifications of the precipitation microstructure of Al–Si–Cu–Mg alloys. This study focuses on the effect of deformation on precipitation microstructure during thermomechanical loadings. Several specimens were thermomechanically cycled while others were exposed to the same thermal cycles without any mechanical loading. The nature and morphological characteristics of the precipitation microstructure of the thermomechanically cycled specimens are compared to those of the thermally aged ones, using transmission electron microscopy (TEM), in order to assess the effect of deformation on the precipitation microstructure and especially on the kinetics of precipitate growth. The absence of any significant effect of superimposed straining during thermal cycling is discussed. Implications for the prevision of yield strength degradation during service operation are briefly presented.

     

Role of end-groups and catalyst in polyester cyclodepolymerization and cycle-chain equilibria

The influence of polyesters end-groups on cyclic oligoester formation is investigated using a series of hydroxy-, carboxy- and methylester-terminated aliphatic polyesters, in the presence of various ester interchange catalysts. The presence of hydroxy end-groups is the preponderant factor on cyclodepolymerization kinetics. This indicates that the main reaction is the intramolecular hydroxy–ester interchange reaction between hydroxy end-groups and ester functions in the chain. Carboxy-ester and ester–ester interchanges play a minor role, as the cycle-chain equilibrium is reached only very slowly when carboxy- or ester-terminated polyesters are reacted. High temperature and the presence of tin catalysts are also favorable factors, while, as expected, dilution shifts the equilibrium toward the formation of high yields of cyclic oligoesters. A mechanism is proposed, based on the reverse of the “coordination-insertion” mechanism established for the ring-opening polymerization of lactones.     

Identification of microstructural mechanisms during densification of a TiAl alloy by spark plasma sintering

This work aims at identifying, by coupled scanning and transmission electron microscopy (SEM and TEM) observations, the densification mechanisms occurring when an atomized Ti-47Al-1W-1Re-0.2Si powder is densified by spark plasma sintering (SPS). For this purpose, interruptions of the SPS cycle have been performed to follow the evolution of the microstructure step by step. The powder particles exhibit a classical dendritic microstructure containing a large amount of out-of-equilibrium α phase. During heating-up, the microstructure undergoes successive transformations. At T = 525-875 °C the α phase transforms into γ. The γ phase formed is supersaturated in W and Re. It de-saturates for T above 875 °C by discontinuous precipitation of W and Re-rich B2 phase. Densification takes place for T between 900 °C and 1150 °C by plastic deformation of the powder particles. TEM observations show that the repartition of the plastic deformation is correlated to the dendritic microstructure, and that dynamic recrystallization mechanisms occur. Microstructural phenomena directly resulting from the high currents involved in the SPS process have not been observed.     

Portfolio Risk Measures: The Time’s Arrow Matters

The traditional ex post risk measure associated to a portfolio, a fund or a market performance, is the standard deviation of a series of past returns, called volatility. We propose an alternative risk measure, that turns out to better quantify the risk actually supported by an investor or asset manager with respect to a portfolio or a fund. This alternative measure is computed from the actual dispersion of successive cumulated returns relative to the corresponding successive cumulated returns produced by an accrued performance of null volatility, which better reflects the dynamics of the risk-return relationship over time. Hence, the proposed name of “accrued returns variability”, for such a risk measure that incorporates the passage of time. Applications are presented, to enlighten the advantage of this risk measure.