Estimation in Random Coefficient Autoregressive Models

Abstract. We propose the quasi‐maximum likelihood method to estimate the parameters of an RCA(1) process, i.e. a random coefficient autoregressive time series of order 1. The strong consistency and the asymptotic normality of the estimators are derived under optimal conditions.     

Thermal decomposition of SRC-II middle distillate under surface vaporizing conditions

Decomposition of SRC-II middle distillate under surface vaporizing conditions was studied as a function of temperature (heating rate), vapour phase residence time and oxygen level. The stressed and unstressed fuel was analysed by capillary gas chromatography. Decomposition was found to be greatest at low temperature. Boiling mode did not appear to affect the extent of decomposition. Decomposition was weakly related to chemical class and strongly related to component volatility. The effect of gas phase residence time and oxygen level were negligible at the conditions studied. It is concluded that decomposition occurs primarily within the liquid and at the vaporizer surface.     

A novel technique for the preparation of secondary fatty amides

A technique for the synthesis of monosubstituted fatty amides at low temperature and ambient pressure was developed. This method involved the condensation of an amine with a triacylglycerol. The primary amine (ethyl,n-butyl,n-hexyl andn-octyl were tested) acted as reagent and solvent for the fatty substrates. No additional organic solvent or catalyst was added. Tallow, vegetable oils and fish oil all served well as substrates, as did pure tripalmitin. The rate of amidation was dependent upon temperature and the ratio of fat to amine. In a series of experiments conducted with tallow andn-butylamine at a fat:amine molar ratio of 1:16, amidation could be carried out at 20°C, producingn-butyltallowamide in 83% yield in 24 hr. When the fat:amine molar ratio was reduced to 1:8, and the temperature raised to 45°C, the amide yield was 87.6% in 24 hr. When the reaction was carried out at the boiling point ofn-butylamine (78°C) and at a fat:amine ratio of 1:8, the amide yield was 93.2% in 4 hr. The reaction progressed more rapidly with higher molecular weight amines. The identity and purity of the amides was assessed by thin-layer chromatography and confirmed by elemental analyses and infrared and C¹³ nuclear magnetic resonance spectroscopy.     

Preparation and characterization of surfactant‐free stimuli‐sensitive microgel dispersions

A surfactant‐free method to produce responsive polymer microgels is introduced. As an example, poly(methacrylic acid) hydrogels with varying crosslinking density have been synthesized in bulk and then chopped using a high shear mechanical cutter to form microgel particles dispersed in water. The mechanical cutting technique enables the concentration and particle size distribution of the microgel suspensions to be easily controlled, therefore making the rheology of the suspensions tuneable. The particle size distribution of the dispersions, characterized using light scattering, was dependent on the speed and duration of mechanical cutting. The particle size distribution also depended on the degree of crosslinking of the hydrogel. The higher the crosslinking density, the lower the average mean diameter of the resulting microgel particles. The lower the crosslinking density of the hydrogel, the larger the difference between the maximum and minimum particle size. The time to complete swelling of the particles upon change in pH was measured to be up to 45 s, depending on the particle size. The rheology of the resulting suspensions as a function of pH was investigated. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 104: 1912–1919, 2007     

Automating Test Case Selection in Model-Based Software Product Line Development

We address the problem of how to select test cases for products in a controlled model-based software product line development process. CVL, the common variability language, gives a framework for materialisation of product models from a given base model, variability model and resolution model. From such product models, software products can be derived. In practise, test case development for the product line often is independent from the product development. Therefore, the problem arises which test cases can be applied to which products. In particular, the question is whether a test case for one speci c product can be also used for a "similar" product. In this paper, we show how the expected outcome of a test case to a product in a model-based software product line development can be determined. That is, we give a procedure for assigning the outcome of a given test case on an arbitrary member of a software product line. We recall the relevant de nitions for software product line engineering, describe our approach, and demonstrate it with the example of a product line of super-automatic espresso machines.     

HDPE/LLDPE reactor blends with bimodal microstructures—Part II: rheological properties

Reactor blends of polyethylene/poly(ethylene-co-1-octene) resins with bimodal molecular weight and bimodal short chain branching distributions were synthesized in a two-step polymerization process. The compositions of these blends range from low molecular weight (LMW) homopolymer to high molecular weight (HMW) copolymer and vice versa HMW homopolymer to LMW copolymer. The shear flow characteristics of these polymers in the typical processing range mostly depend on the molecular weight and MWD of the polymer and are independent of the short chain branch content. From oscillatory shear measurements, it was observed that the viscosity of HMW polymers was reduced with the addition of LMW material. For the polymers produced with this two-step polymerization process, the LMW homopolymer and HMW copolymer blends and HMW homopolymer and LMW copolymer blends were melt miscible, despite the large viscosity differences of the pure components.     

Equi-affine Invariant Geometry for Shape Analysis

Traditional models of bendable surfaces are based on the exact or approximate invariance to deformations that do not tear or stretch the shape, leaving intact an intrinsic geometry associated with it. These geometries are typically defined using either the shortest path length (geodesic distance), or properties of heat diffusion (diffusion distance) on the surface. Both measures are implicitly derived from the metric induced by the ambient Euclidean space. In this paper, we depart from this restrictive assumption by observing that a different choice of the metric results in a richer set of geometric invariants. We apply equi-affine geometry for analyzing arbitrary shapes with positive Gaussian curvature. The potential of the proposed framework is explored in a range of applications such as shape matching and retrieval, symmetry detection, and computation of Voroni tessellation. We show that in some shape analysis tasks, equi-affine-invariant intrinsic geometries often outperform their Euclidean-based counterparts. We further explore the potential of this metric in facial anthropometry of newborns. We show that intrinsic properties of this homogeneous group are better captured using the equi-affine metric.     

Geschäftsmodelle

The business model concept, although a relatively new topic for research, has garnered growing attention over the past decade. Whilst it has been robustly defined, the concept has so far attracted very little substantive research. In the context of the wide-spread digitization of businesses and society at large, the logic inherent in a business model has become critical for business success and, hence, a focus for academic inquiry. The business model concept is identified as the missing link between business strategy, processes, and Information Technology (IT). The authors argue that the BISE community offers distinct and unique competencies (e.g., translating business strategies into IT systems, managing business and IT processes, etc.) that can be harnessed for significant research contributions to this field. Within this research gap three distinct streams are delineated, namely, business models in IT industries, IT enabled or digital business models, and IT support for developing and managing business models. For these streams, the current state of the art, suggest critical research questions, and suitable research methodologies are outlined.     

Hydrolytic degradation of ionically cross-linked polyphosphazene microspheres

The hydrolytic degradation of gel microspheres based on calcium cross-linked phosphazene polyelectrolytes, poly[di(carboxylatophenoxy)phosphazene] (PCPP) and poly[(carboxylatophenoxy) (glycinato)phosphazene] (PCGPP), was investigated. These microspheres are of importance as carriers in protein and cell encapsulation. Both PCPP and PCGPP ionotropic polyphosphazene hydrogels are degradable in an aqueous environment (pH 7.4, 37°C). The degradation rates can be increased by incorporation of hydrolysis sensitive glycinato groups as the pendant structures in the polymer (PCGPP). Hydrolysis of these polymer hydrogels led to low molecular weight (<1,000 Da) products. The erosion and molecular weight profiles varied also according to the molecular weight of the polyphosphazene constituting the gel beads. Another approach to affect the degradation rates consists of coating microspheres with poly-L -lysine. Ionotropic polyphosphazene hydrogels have potential as biodegradable devices for controlled drug delivery systems. © 1994 John Wiley & Sons, Inc.     

Avalanching flow of cohesive powders

The flow dynamics of cohesive powders is investigated in rotating cylinders with an L : R ratio of 3 : 1 using experiments and DEM simulations. Flow onset and steady-state behavior are compared for free-flowing (cohesionless) dry glass beads, wet glass beads, and “dry” cohesive powders (lactose, microcrystalline cellulose). The avalanching dynamics of powders is substantially different from those observed for free-flowing or wet-cohesive glass beads. Dry cohesive powders exhibit history-dependent flow dynamics, significant dilation, aperiodic avalanche frequencies, and variable avalanche size. These behaviors also provide a route for effective characterization of cohesive forces under dilated conditions characteristic of unconfined flows.