Graft polymerization of acrylic acid onto polyphenylene sulfide nonwoven initiated by low temperature plasma

Graft copolymerization of acrylic acid (AA) onto polyphenylene sulfide (PPS) nonwoven initiated by low temperature plasma was studied. The effects of various conditions on graft reaction and the grafting rate were investigated. SEM images showed that PPS nonwoven was grafted, and the graft copolymerization only occurred on the surface of PPS. It may be due to the chain transference going with the graft copolymerization. It was found that with the increasing of plasma power, treatment time, space between electrodes, monomer concentration, and temperature of graft polymerization, the grafting rate increased at first, went to the top, and then decreased. The PPS nonwoven surface graft reaction could be optimized by the following processing conditions: 120 s of plasma treatment time, 50 W of plasma power, 1.5 cm of space between electrodes, 30% (w/w) of monomer concentration, and 50°C of temperature of graft polymerization. Measurement of XPS showed that the peak of C1s of graft polyacrylic acid was existed, and the peak area increased with the increase of the grafting rate. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5884–5889, 2006     

Three schemes of remote information concentration based on ancilla-free phase-covariant telecloning

In this paper, remote information concentration is investigated which is the reverse process of the $1\rightarrow 3$ optimal asymmetric economical phase-covariant telecloning (OAEPCT). The OAEPCT is different from the reverse process of optimal universal telecloning. It is shown that the quantum information via $1\rightarrow 3$ OAEPCT procedure can be remotely concentrated back to a single qubit with a certain probability via several quantum channels. In these schemes, we adopt Bell measurement to measure the joint systems and use projected measurement and positive operator-valued measure to recover the original quantum state. The results shows non-maximally entangled quantum resource can be applied to information concentration.     

氯化聚乙烯接枝马来酸酐胶粘剂的研究

本文介绍了改性聚丙烯（PP）基泡沫材料用的水溶性胶粘剂的研制。该胶粘剂不影响泡沫材料的阻燃性能和吸声性能，并有较好的热稳定性和储存性以及优化的耐水性。     

一种关于目标罚参数的精确罚函数法

罚函数法是一种将约束优化问题转化为无约束问题的重要方法.对于一般的约束优化问题,通过加入新参数,给出了一种改进的精确罚函数和这种罚函数的精确罚定理证明,提出了求解这种罚函数的算法.实验表明该算法是有效的.     

废旧轮眙回收利用现状和利用途径

针对废旧轮胎回收处理压力越来越大的难题，系统地分析了处理废旧轮胎的各种方法，对我国翻新轮胎，胶粉用于建筑市场、铺路建设，废胎直接用于热能市场等等的利与弊、现状与前景都做了较详细的论述。对废胎利用与管理上必要的立法问题对照国外先进国家的经验，提出了建设性的意见。     

On the use of graphical method to determine the targets of single-contaminant regeneration recycling water systems

Water system integration with regeneration recycling can reduce freshwater consumption and wastewater discharge to the maximum extent. In this paper, by analyzing the limiting composite curve of a single-contaminant water system, a method is proposed to construct the optimal water supply line for regeneration recycling. Accordingly the targets for regeneration recycling water systems are obtained. The targets in sequence are the minimum freshwater consumption (the minimum wastewater discharge), the minimum regenerated water flowrate, and the optimal regeneration concentration. The post-regeneration concentration is taken to be fixed in the sequential targeting procedure. The interactions of these targets are analyzed, and formulas for calculating these targets are proposed. The results show that for a single-contaminant regeneration recycling water system, the minimum freshwater consumption is determined by the shape of the limiting composite curve below the post-regeneration concentration. The optimal regeneration concentration is defined as the minimum regeneration concentration at the minimum freshwater consumption and the corresponding minimum regenerated water flowrate. The minimum regenerated water flowrate and the optimal regeneration concentration are both related to the geometrical features of the limiting composite curve of the water-using system and to the post-regeneration concentration. The optimal regeneration concentration has no direct relationship with the pinch concentration.     

Graft copolymerization of styrene onto casein initiated by potassium diperiodatonickelate (IV) in alkaline medium

A novel redox system, potassium diperiodatonickelate (Ni(IV))‐casein is used to initiate graft copolymerization of Styrene onto casein under different conditions in aqueous alkaline solution. Graft copolymers with both high grafting efficiency (>98%) and percentage of grafting(>300%) are obtained, which indicated that (Ni(IV))‐casein redox pair is an efficient initiator for this grafting. The effects of reaction parameters, such as monomer‐to‐casein weight ratio, initiator concentration, pH, time, and temperature, are investigated. A tentative initiation mechanism is proposed. The structures and properties of the graft copolymer are characterized by Fourier transform infrared Spectroscopy, X‐ray diffraction diagrams, and Scanning Electron Microscope. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4247–4251, 2006     

Polypropylene/polyamide 6/polyethylene-octene elastomer blends. Part 3. Mechanisms of volume dilatation during plastic deformation under uniaxial tension

It has been shown in a previous paper in this series that important dilatation is produced by plastic deformation under tension of neat PP and PP/PA6/POE blends, for which the POE to PA6 concentration ratio equals 1/2. In this work, the detailed mechanisms of this volume change are investigated from electron micrographs (SEM and TEM) obtained in the deformed state. At low alloy content, it is thus observed that dilatation results from decohesion of the PA6 particles from the PP matrix. As the amount of PA6 and POE increases, voids are nucleated preferentially in the thicker POE interphase making a shell around the PA6 particles, and secondarily in isolated POE particles. Unexpectedly, it has been found that the overall volume dilatation decreases with total alloying content. This is interpreted by: (i) the increasing contribution of PA6 that intrinsically deforms with less cavitation than PP, (ii) the post-cavitation rubber-like stretching of POE particles and, (iii) the early formation of a percolating network of shear bands from the diffuse array of voids formed after the yield point. These mechanisms explain the gradual increase of the resistance to impact of the PP/PA6/POE as their alloying content is increased.     

VoIP技术及其安全性研究

本文首先介绍了VoIP技术的研究和发展方向,通过分析VoIP的核心协议——SIP协议的安全问题和研究现状,说明VoIP安全性能的研究内容和现实意义,最后给出了本研究的发展方向。