The Danish Twin Apartment Study – Part II: Mathematical modeling of the relative strength of sources of indoor air pollution

Abstract This study deals with the modeling of air pollution in apartments from laboratory measurements of source strengths, using formaldehyde and Total Volatile Organic Compounds (TVOCs) as model pollutants. The sources in two test apartments were grouped into two: building-related sources and occupant-related sources. The measured source strengths and ventilation rates were used for the prediction of concentrations expected in the apartments. These predictions were compared to measurements in the apartment over 12 months. The conclusions were that the model predictions based on emission rates measured in the laboratory can be used to predict the long-term concentration of the two model pollutants in the apartments. Considering the measured differences in ventilation between the apartments, an occupant emission rate of between 0.2 and 0.3 mg/h/kg body weight could be estimated. Based on previous suggested limits of acceptable exposures of humans to VOCs, an acceptable average emission rate of VOCs from building materials in general was estimated to be about 30 (μ/m²/h. The modeling showed that during the first 200 days, building materials dominated the emissions. After this, sources relating to the occupants dominated. On average about half of the VOC pollution originated from the building materials.     

Simulating Ramsey-Type Fringes in a Pulsed Microwave-Driven Classical Josephson Junction

We present evidence for a close analogy between the nonlinear behaviour of a pulsed microwave-driven Josephson junction at low temperature and the experimentally observed behaviour of Josephson systems operated below the quantum transition temperature under similar conditions. We specifically address observations of Ramsey-type fringe oscillations, which can be understood in classical nonlinear dynamics as results of slow transient oscillations in a pulsed microwave environment. Simulations are conducted to mimic experimental measurements by recording the statistics of microwave-induced escape events from the anharmonic potential well of a zero-voltage state. Observations consistent with experimentally obtained Ramsey-type oscillations are found in the classical model. An erratum to this article can be found at     

Parameter estimation using a sensor array in a Ricean fading channel

The estimation of the Direction-Of-Arrival (DOA) and the variance of the angular spread, using an array of sensors in the case of a Ricean channel is considered, using the Maximum-Likelihood, Least-Squares and Weighted Least Squares criteria. The Cramér-Rao bound is also obtained for the problem of interest. Simplification of the cost functions to reduce the dimension of the problem has been carried out and the performance of the methods has been studied based on numerical experiments. A major part of the work was carried out when K V S Hari was visiting the Department of Signals, Sensors and Systems during Jul–Sep 1995, on leave from the Indian Institute of Science     

A Comparison of Presentation Methods for Reading on Mobile Phones

A study compares two methods of reading text-based content on mobile phones: traditional scroll-based reading and Rapid Serial Visual Presentation, which displays words rapidly in a sequence. University students used a prototype called Feedo to test both methods, and their reading comprehension, efficiency, and preference ratings were measured. The results show that efficiency increases with fast RSVP, comprehension is equal, and preference rating is lower than with self-paced scroll.     

Separation of the enantiomers of ibuprofen and its major phase I metabolites in urine using capillary electrophoresis

This report describes a simple, rapid, automated microassay for measuring in vitro changes of oxidative burst of phagocytes following challenge with metals for orthopedic devices. The production of reactive oxygen species (ROS) by polymorphonuclear leukocytes (PMNs) was measured using 2',7'-dichlorofluorescin-diacetate (DCFH-DA) as fluorescent probe. DCFH-DA enters the cells and is oxidized by ROS to fluorescent DCF. The DCF generated was directly proportional to ROS produced intracellularly: The fluorescence intensity was read and converted to an index of ROS production by cells. In our experimental system, granulocytes (PMNs) were isolated from normal human blood and seeded in microplates. To verify if metals could influence ROS production, chromium, cobalt, nickel, molybdenum, titanium, aluminum, and vanadium prepared as aqueous extracts in phosphate-buffered saline were tested onto PMNs using phorbolmyristate acetate (PMA) as positive control. Molybdenum, aluminum, and vanadium increased ROS generation by PMNs, while signals not different from unstimulated PMNs were recorded for chromium, cobalt, nickel, and titanium. The DCFH-DA microplate-based assay provides an in vitro tool for the detection of oxygen-reactive species generated by PMNs as a response to metals.     

An Operator-integration-factor splitting method for time-dependent problems: Application to incompressible fluid flow

In this paper we present a simple, general methodology for the generation of high-order operator decomposition (splitting) techniques for the solution of time-dependent problems arising in ordinary and partial differential equations. The new approach exploits operator integration factors to reduce multiple-operator equations to an associated series of single-operator initial-value subproblems. Two illustrations of the procedure are presented: the first, a second-order method in time applied to velocity-pressure decoupling in the incompressible Stokes problem; the second, a third-order method in time applied to convection-Stokes decoupling in the incompressible Navier-Stokes equations. Critical open questions are briefly described.     

Glycogen content, buffering capacity and resting pH in live muscles of pigs of different halothane genotypes (a pilot project)

The development of PSE (pale, soft and exudative) meat is characterized by a rapid decrease in pH post-mortem and/or a low ultimate pH. We investigated some physiological properties of the live muscle (the glycogen content, the non-bicarbonate buffering capacity and 'resting pH'), which could influence both the decrease in pH and the ultimate pH. Measurements were performed on three halothane genotypes, hal(N)hal(N), hal(N)hal(n) and hal(n)hal(n), with their known predispositions for PSE meat. It was demonstrated that the glycogen content in both the groups of double recessive and heterozygous individuals was higher than the levels in the group of homozygous dominant pigs. No difference was found in non-bicarbonate buffering capacity between the groups. The groups with the highest glycogen levels also had the lowest 'resting pH' values. The results indicate that measurement of glycogen content in vivo may be superior to the halothane test in detecting PSE-prone individuals. The lower pH values of carriers of the hal(n) gene further indicate that the characteristic rapid decrease after slaughter may not be as fast as generally accepted, as even very low pH values can be observed in the muscles of live pigs.     

Measurements of the characteristic lengths of smoke detectors

The dynamic performance of point-type smoke detectors is described by a simple model including two independent parameters, the static response threshold, and the characteristic length of the detector. An experimental system with constant rate of increase of smoke density under varying velocity conditions is used to determine the model parameters.Nomenclature k constant smoke density gradient (dB/m/s) - L characteristic length of the detector (m) - m _i smoke density inside the detector (dB/m) - m _o smoke density outside the detector (dB/m) - m _or measured smoke density at response (dB/m) - m _r response threshold of the detector (dB/m) - t time(s) - v gas flow velocity at the detector (m/s) - time constant(s)