Bias-temperature instabilities of polysilicon gate HfO/sub 2/ MOSFETs

Bias-temperature instabilities (BTI) of HfO/sub 2/ metal oxide semiconductor field effect transistors (MOSFETs) have been systematically studied for the first time. NMOS positive BTI (PBTI) exhibited a more significant V/sub t/ instability than that of PMOS negative BTI (NBTI), and limited the lifetime of HfO/sub 2/ MOSFETs. Although high-temperature forming gas annealing (HT-FGA) improved the interface quality by passivating the interfacial states with hydrogen, BTI behaviors were not strongly affected by the technique. Charge pumping measurements were extensively used to investigate the nature of the BTI degradation, and it was found that V/sub t/ degradation of NMOS PBTI was primarily caused by charge trapping in bulk HfO/sub 2/ rather than interfacial degradation. Deuterium (D/sub 2/) annealing was found to be an excellent technique to improve BTI immunity as well as to enhance the mobility of HfO/sub 2/ MOSFETs.     

Influence of aggregate content on the migration coefficient of concrete materials using electrochemical method

In order to investigate the effect of coarse aggregate content on the chloride ion migration coefficient of concrete, specimens with different coarse aggregate volume fractions and two water/cement (w/c) ratios of mortar matrix were used. The chloride ion migration coefficient of concrete is obtained using the electrochemical technique to accelerate chloride ion migration in cement-based material and the experimental results were plotted as a function of the fine aggregate volume fraction. The results are analyzed comparing experimental results and theoretical models that represent the concretes as three-phase composite materials. The three phases are the mortar matrix, the coarse aggregate, and the interfacial transition zone between the two. The chloride ion migration coefficient is used to assess the dilution, tortuosity, interfacial transition zone (ITZ) and, percolation effects of coarse aggregate in concrete. It appears that the dilution and tortuosity effects are a dominant factor affecting the chloride ion migration coefficient of concrete in the low volume fraction of coarse aggregate. As the volume fraction of coarse aggregate increases to 40 and 20% in concrete of w/c ratio 0.35 and 0.45, respectively, the ITZ with percolation effects are significantly.     

Robust Space Time Receiver for CDMA-based Antenna Arrays

In this paper, we propose a new robust code division multiple access (CDMA) receiver of which weight vector is obtained by projecting the effective spatio-temporal signature waveform onto the signal subspace of the data covariance matrix. We verified our proposed algorithm by the field measured data obtained with a custom-built wideband CDMA test-bed. It will be shown that the proposed algorithm is robust to the signal mismatch.     

Multi-level simulation of metal-forming processes

The IBF has for some years made use of finite element programmes to solve metal-forming problems. In the course of this investigation, it has become evident that a problem-oriented adaptation of FEM simulation to the problem in hand is beneficial in terms of computation effort. The computation time for the process parameters is optimised in a multi-level simulation. At level 1 (global analysis) integral parameters such as the required force and required work are computed using a coarse FEM mesh. At level 2 (local analysis) an optimised number of elements is used to determine continuum mechanics parameters like stress, strain and temperature. Microscopic phenomena are simulated at level 3 (microscopic analysis), using special micro-material elements and thermodynamic models.     

A typed functional extension of logic programming

A logic language is suitable for specification if it is equipped with features for data abstraction and modularization. In this paper, an effective mechanism to incorporate function and type into logic programming is presented as the means to embed data abstraction mechanism into logic programming. This incorporation is essentially based on Horn clause logic with equality and a polymorphic type system that is an extension of Mycroft and O’Keefe’s system. This paper also presents an implementation based on Warren Abstract Machine (WAM) and shows the performance, along with a comparison with WAM.     

Validation of a specific selection criterion for dental periapical radiography

We report three children with hemidystonia in whom anti-cardiolipin (aCL) antibodies were demonstrated. Systemic lupus erythematosus was excluded on the basis of both clinical and serological criteria, and the diagnosis of primary antiphospholipid syndrome (PAPS) was made. In two cases, aCL antibodies could be causally related to a presumed immune-mediated thrombotic event involving the basal ganglia as shown by magnetic resonance imaging (MRI). In the remaining patient the finding of white matter alteration on NMR might be due to cross-reactivity of anti-phospholipid (aPL) antibodies with cerebral phospholipids, resulting in demyelination. We suggest that PAPS must always be considered when isolated or recurrent focal cerebral ischaemia, and particularly hemidystonia, occur in childhood.     

A comparative evaluation of two sensitive serum neutralization tests for bovine herpesvirus-1 antibodies

The need for frequent injections and monitoring, the possibility of multiple gestations, and the higher cost compared to clomiphene citrate, prevents many clinicians from using human menopausal gonadotrophin (HMG) for ovulation induction. A sequential medication regimen, in which HMG is taken after clomiphene, overcomes these problems. We retrospectively compared per cycle fecundity and birth rates in 119 cycles of clomiphene-HMG, 524 cycles of clomiphene alone, 57 cycles of HMG alone, and 79 cycles of concurrent HMG and clomiphene in patients receiving intra-uterine insemination (IUI), who were free of endometriosis or tubal disease. Per cycle fecundity for clomiphene-HMG was 22% [95% confidence interval (CI) 12-34%], double that of clomiphene alone (11%) (95% CI 8-14%) (P < 0.01), and equal to HMG alone (18%) (95% CI 7-29%) or HMG and clomiphene together (19%) (95% CI 10-28%). The multiple birth rate for clomiphene-HMG (7/21) equalled that for HMG alone (3/12) and HMG and clomiphene together (3/8). The average number of ampoules of HMG required [follicle stimulating hormone (FSH) 75 mIU, luteinizing hormone (LH) 75 mIU] was decreased by 65% from 24.5 +/- 1.0 for HMG or HMG and clomiphene together to 8.6 +/- 0.3 for clomiphene-HMG (P < 0.001). Per cycle fecundity was identical when one, two or three ampoules of HMG per day were administered after clomiphene. We conclude that ovulation induction with sequential clomiphene-HMG results in fecundity double that of clomiphene alone and equal to HMG alone or concurrent with clomiphene, thereby reducing the requirement for HMG.