High-efficiency remediation of cadmium (Cd2+) from aqueous solution using poultry manure– and farmyard manure–derived biochars

Farmyard manure (FYM-BC) and poultry manure (PM-BC) derived biochars were applied as adsorbents to remove Cd²⁺ from water. Results indicated that PM-BC was a more efficient adsorbent than FYM-BC at all experimental conditions. Maximum Cd²⁺ adsorption was observed at pH 4, temperature 318 K and contact time 1 h, regardless of biochar type. The Langmuir model predicted maximum adsorption capacity of 90.09 mg g^?1 for PM-BC. The data fitting to pseudo-second-order model proposed chemisorption of Cd²⁺ onto biochars. Thermodynamics indicated that adsorption was spontaneous and endothermic. Post-adsorption analysis provided evidences of strong chemical interactions between biochars’ functional groups and Cd²⁺ ions.     

Effect of different application techniques on microshear bond strength of self-etch adhesives to dentin

Objectives: To investigate the effect of different self-etch adhesive systems application techniques: active or passive in a single or double layer on adhesive–dentin microshear bond strength.

Methods: Occlusal surfaces of 48 extracted human molars were ground to expose flat superficial dentin surfaces. Specimens were randomly divided into two main groups according to the tested self-etch adhesive system either: One-step self-etch (Adper^TM easy-one) or two-step self-etch (Adper^TM SE Plus). Each adhesive system was applied on the prepared dentin surfaces followed one of these techniques: (1) Passive application of a single layer, (2) Active application of single layer, (3) Passive application of double adhesive layer (with light curing in between), and (4) Active application of double adhesive layers. Resin composite was packed inside micro-tubes fixed on the bonded dentin surfaces and light cured for 40 s. All specimens were stored in artificial saliva either for 24 h or 3 months before testing. Microshear bond strength test was employed using a universal testing machine at a crosshead speed of 0.5 mm/min.

Results: Adper^TM SE Plus showed higher significant microshear bond strength in compared with Adper^TM easy-one. For both adhesive systems active application showed higher significant microshear bond strength to dentin than passive application. Double application of adhesive systems showed lower microshear bond strength than single application.

Conclusion: Active application of self-etch adhesives could improve the dentin microshear bond strength. Double application with curing in between the layers did not improve the bond strength to the tested adhesive.     

Synthesis,Characterization and Surface Properties of Amidosulfobetaine Surfactants Bearing Odd-Number Hydrophobic Tail

Three amidosulfobetaine surfactants were synthesized namely: 3-(N-pentadecanamidopropyl-N,N-dimethyl ammonium) propanesulfonate (2a); 3-(N-heptadecanamidopropyl-N,N-dimethyl ammonium) propanesulfonate (2b), and 3-(N-nonadecanamidopropyl-N,N-dimethyl ammonium) propanesulfonate (2c). These surfactants were prepared by direct amidation of commercially available fatty acids with 3-(dimethylamino)-1-propylamine and subsequent reaction with 1,3-propanesultone to obtain quaternary ammonium salts. The synthesized surfactants were characterized by IR, NMR and mass spectrometry. Thermogravimetric analysis (TGA) results showed that the synthesized surfactants have excellent thermal stability with no major thermal degradation below 300 °C. The critical micelle concentration (CMC) values of the surfactants 2a and 2b were found to be 2.2 × 10^?4 and 1.04 × 10^?4 mol/L, and the corresponding surface tension (γ_CMC) values were 33.14 and 34.89 mN m^?1, respectively. The surfactants exhibit excellent surface properties, which are comparable with conventional surfactants. The intrinsic viscosity of surfactant (2b) was studied at various temperatures and concentrations of multi-component brine solution. The plot of natural logarithm of relative viscosity versus surfactant concentration obtained from Higiro et al. model best fit the surfactant behavior. Due to good salt resistance, excellent surface properties and thermal stability, the synthesized surfactant has potential to be used in various oil field applications such as enhanced oil recovery, fracturing, acid diversion, and well stimulation.     

中国城市女性敏感头皮的程度及判定方法的比较

调查中国城市女性敏感头皮的程度并比较自述与10Q问卷和3S问卷在评估敏感头皮症状中的差异和一致性.使用自述、3S问卷、10Q问卷3种方法调查中国城市健康女性的敏感头皮的程度及其症状分布,并比较10Q问卷和3S问卷敏感头皮的发生率与自述判定结果的一致性,以及在2种问卷下敏感头皮症状的分布及其一致性.在305名志愿者中,通过自述判定为敏感头皮的有166名(54.4％),10Q问卷判定为敏感头皮的有226名(74.1％),3S问卷判定为敏感头皮的有251名(82.3％).自述、3S问卷、10Q问卷3种方法对于敏感头皮的判断两两之间均有显著一致性(P<0.05).在被调查人群中,3S和10Q2种问卷对5种头皮敏感症状发生率的判断在结果上有显著差异.其中,瘙痒、刺痛、疼痛症状的发生频率在3S问卷结果中显著高于10Q问卷结果,灼烧的发生频率显著低于10Q问卷结果,紧绷症状的出现频率在2种问卷中无显著差异.上海和广州两地的症状分布及发生率与总体趋势一致.敏感人群中,敏感头皮症状的发生率在2种问卷结果中具有显著一致性(Kappa=0.69,P<0.001).自我评估、3S问卷与10Q问卷3种评价方法之间具有显著的一致性,可以作为敏感头皮判断的工具.3S问卷可以用于大样本人群敏感头皮发生率的调查工具,而10Q问卷可以用于判断敏感头皮的评价,可以作为评价头皮敏感人群头皮症状的有效工具和方法.     

Interfacial activity and micellar morphology of an imidazolium ring containing zwitterionic surfactants

Zwitterionic surfactants based on 3-(1-alkyl-3-imidazolio) propane-sulfonate ([ImS3-R] where R is octyl or dodecyl) is an emerging and important class of amphiphile due to their relevance as nano reactors for the synthesis of metallic nanoparticles and accelerated acid hydrolysis. The physicochemical properties of such synthesized imidazolium ring-containing zwitterionic surfactants have been characterized by surface tension and small-angle neutron scattering (SANS) techniques. Surface tension measurements were used to calculate several thermodynamic parameters over a range of concentrations and temperatures (298–313 K). The results obtained showed a weak signature representing the critical micelle concentration (CMC) for ImS3-8, however, by increasing the alkyl length of the hydrophobic group to dodecyl, that is, ImS3-8 to ImS3-12, the signature of the CMC was much more evident. As expected, the CMC for ImS3-12 shifted to a lower concentration. An increase in temperature increased the surface activity and decreased the CMC of both zwitterionic surfactants, although the changes were small. Compared to classical surfactants, that is, sodium dodecyl sulfate and dodecyl trimethylammonium bromide, the CMC of ImS3-12 is much lower. Modeling of SANS data demonstrated that the morphology of the micelles formed by these amphiphiles may be described by the “classical” model, a central hydrophobic core, with a shell of hydrated headgroups. Due to their widespread applications in colloidal and interfacial science, the present study adds new insight to the fundamental understanding of these interesting imidazolium-based surface-active ionic liquids (ImS3-R).     

Silicon Seed Priming Combined with Foliar Spray of Sulfur Regulates Photosynthetic and Antioxidant Systems to Confer Drought Tolerance in Maize (Zea mays L.)

Silicon - The present study evaluated the effect of silicon (Si) seed priming and sulfur (S) foliar spray on drought tolerance of two contrasting maize hybrids viz. drought tolerant Hi-Corn 11 and...     

Cure characterization of Cycom 977‐2A carbon/epoxy composites for quickstep processing

In this effort, Quickstep, a relatively a new technique, have been employed for manufacturing of composite materials. The cure schedule provided by a prepreg manufacturer is usually designed for autoclave or other traditional processing techniques and thermosetting resin systems are formulated for ramp rate curing 2–3 K min^?1. While in case of Quickstep processing, ramp rates of 15 K min^?1 can be achieved, thus changing the chemorheology of resin. The cure process of 977‐2A carbon/epoxy composites was evaluated for Quickstep processing using differential scanning calorimetry (DSC), dynamic mechanical and thermal analysis, and Fourier transformed infrared and results were compared with cure cycle employed for autoclave curing. Optimum hold time for Quickstep processing at upper curing temperature (180°C) was determined using DSC. The hold time of 120 min at 180°C was found to be suitable for Quickstep cure cycle, producing a panel of similar degree of cure to that achieved through autoclave processing schedule. Final degree of cure was dependent on time spent at upper cure temperature and slightly on initial steps of the cure cycle which was used to control the resin flow, fiber wetting, and void removal. Quickstep processed samples exhibited higher T_g and crosslink density and similar molecular network structure to the autoclave cured samples. POLYM. ENG. SCI., 54:887–898, 2014. © 2013 Society of Plastics Engineers     

Performance analysis of three advanced controllers for polymerization batch reactor: An experimental investigation

The performances of three advanced non-linear controllers are analyzed for the optimal set point tracking of styrene free radical polymerization (FRP) in batch reactors. The three controllers are the artificial neural network-based MPC (NN-MPC), the artificial fuzzy logic controller (FLC) as well as the generic model controller (GMC). A recently developed hybrid model (Hosen et al., 2011a. Asia-Pac. J. Chem. Eng. 6(2), 274) is utilized in the control study to design and tune the proposed controllers. The optimal minimum temperature profiles are determined using the Hamiltonian maximum principle. Different types of disturbances are introduced and applied to examine the stability of controller performance. The experimental studies revealed that the performance of the NN-MPC is superior to that of FLC and GMC.