Recent nanotheranostics applications for cancer therapy and diagnosis: A review

Nanotheranostics has attracted much attention due to its widespread application in molecular imaging and cancer therapy. Molecular imaging using nanoparticles has attracted special attention in the diagnosis of cancer at early stages. With the progress made in nanotheranostics, studying drug release, accumulation in the target tissue, biodistribution, and treatment effectiveness are other important factors. However, according to the studies conducted in this regard, each nanoparticle has some advantages and limitations that should be examined and then used in clinical applications. The main goal of this review is to explore the recent advancements in nanotheranostics for cancer therapy and diagnosis. Then, it is attempted to present recent studies on nanotheranostics used as a contrast agent in various imaging modalities and a platform for cancer therapy.     

Efficient synthesis of novel Naphthacene derivatives based on Thiouracil

A simple one-pot three-component synthesis of fused thiouracils from readily available starting materials including 2-hydroxy-1,4-naphthoquinone, aromatic aldehydes and 6-amino-2-thiouracil in good yields is described. The sequences of cascade reactions include Knoevenagel condensation, Michael addition and cyclocondensation.     

Facile and rapid synthesis of piperidinium-6-amino-4-aryl-3, 5-dicyano-1,4-dihydropyridine-2-thiolate

A fast and convenient protocol for the synthesis of a new class of piperidin-1-ium 6-amino-4-aryl-3,5-dicyano-1,4-dihydropyridine-2-thiolate (piperidinium salt) derivatives is developed by the one-pot, three-component reactions of cyanothioacetamide, aromatic aldehydes and piperidine in dichloromethane at room temperature. The features such as operational simplicity, mild conditions, absence of catalyst, high yields in short reaction times, simple purification process with no chromatographic technique make the protocol highly attractive.     

The Role of Sarcopenic Obesity in Cancer and Cardiovascular Disease: A Synthesis of the Evidence on Pathophysiological Aspects and Clinical Implications

Obesity is globally a serious public health concern and is associated with a high risk of cardiovascular disease (CVD) and various types of cancers. It is important to evaluate various types of obesity, such as visceral and sarcopenic obesity. The evidence on the associated risk of CVD, cancer and sarcopenic obesity, including pathophysiological aspects, occurrence, clinical implications and survival, needs further investigation. Sarcopenic obesity is a relatively new term. It is a clinical condition that primarily affects older adults. There are several endocrine-hormonal, metabolic and lifestyle aspects involved in the occurrence of sarcopenic obesity that affect pathophysiological aspects that, in turn, contribute to CVD and neoplasms. However, there is no available evidence on the role of sarcopenic obesity in the occurrence of CVD and cancer and its pathophysiological interplay. Therefore, this review aims to describe the pathophysiological aspects and the clinical and epidemiological evidence on the role of sarcopenic obesity related to the occurrence and mortality risk of various types of cancer and cardiovascular disease. This literature review highlights the need for further research on sarcopenic obesity to demonstrate the interrelation of these various associations.     

Synthesis of polypropylene/clay nanocomposites using bisupported Ziegler‐Natta catalyst

In this article, preparation of polypropylene/clay nanocomposites (PPCNC) via in situ polymerization is investigated. MgCl₂/montmorillonite bisupported Ziegler‐Natta catalyst was used to prepare PPCNC samples. Montmorillonite (MMT) was used as an inert support and reinforcement agent. The nanostructure of the composites was characterized by X‐ray diffraction, scanning electron microscopy, and transmission electron microscopy techniques. Obtained results showed that silica layers of the MMT in these PPCNC were intercalated, partially exfoliated, and uniformly dispersed in the polypropylene matrix. Thermogravimetric analysis showed good thermal stability for the prepared PPCNC. Differential scanning calorimetric was used to investigate both melting and crystallization temperatures, as well as the crystallinity of the PPCNC samples. Results of permeability analysis showed significant increase in barrier properties of PPCNC films. Effective parameters on molecular weight and flow ability of produced samples such as Al/Ti molar ratio and H₂ concentration were also investigated. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

In situ polymerization of polyethylene/clay nanocomposites using a novel clay‐supported Ziegler‐Natta catalyst

Polyethylene/clay nanocomposites (PECNC) were synthesized via in situ Ziegler‐Natta catalyst polymerization. Activated catalyst for polymerization of ethylene monomer has been prepared at first by supporting of the cocatalyst on the montmorillonite (MMT) smectite type clay and then active complex for polymerization formed by reaction of TiCl₄ and aluminum oxide compound on the clay. Acid wash treatment has been used for increasing hydroxyl group and porosity of the clay and subsequently activity of the catalyst. The nanostructure of composites was investigated by X‐ray diffraction (XRD) and transmission electron microscopy (TEM). Obtained results show that silica layers of the mineral clay in these polyethylene/nanocomposites were exfoliated, intercalated, and uniformly dispersed in the polyethylene matrix even at very high concentration of the clay. Thermogravimetric analysis (TGA) shows good thermal stability of the PECNCs. Differential scanning calorimeter (DSC) results reveal considerable decrease in the crystalline phase of the PECNC samples. Results of permeability analysis show an increase in barrier properties of PECNC films. POLYM. COMPOS., 2009. © 2009 Society of Plastics Engineers     

Synthesis of sulfur-doped carbon nanotubes from sulfur powder using chemical vapor deposition

Sulfur-doped carbon nanotubes (SCNT) with high sulfur contents have been prepared using chemical vapor deposition (CVD) from sulfur powder, acetylene gas and Fe/CaCO₃ (as catalyst). In this regard, various growth's temperatures were examined to investigate its effects on the structure and the sulfur content of prepared SCNT. The best condition was obtained at 700°C and using 4 g of sulfur powder. The product was characterized using FE-SEM and EDS, which showed rode-like SCNT with about 40 nm diameter and 10.75% sulfur content. Moreover, TEM, Raman and XPS analyses were employed to obtain more details related to the product. The XPS results confirmed the presence of sulfur atoms, which covalently incorporated in the carbon framework. Finally, the catalytic ability of the product in oxygen evolution reaction was examined and the results showed high stability and low oxygen production rate for this product.     

Evaluation of PCL/chitosan electrospun nanofibers for liver tissue engineering

In this investigation, a nanofibrous scaffold was fabricated through electrospinning of polycaprolactone (PCL) and chitosan (CS) using a novel collector to make better orientation and pore size for cell infiltration. PCL/CS nanofibers with 90-rpm collector speed and 40° angle between collector wires of the new collector have fewer diameters with better pore, size and nanofibers orientation. Mechanical properties, roughness parameters, topology, structure, hydrophilicity, and cell growing were considered for liver tissue engineering. The cell culture was done using epithelial liver mouse cells. The developed electrospun PCL/CS scaffold using novel collector would be an excellent matrix for biomedical applications especially liver tissue engineering.     

Remarkable electrocatalytic activity of Ni-nanoparticles on MOF-derived ZrO2-porous carbon/reduced graphene oxide towards methanol oxidation

In the present work, a porous carbonaceous platform containing zirconium oxide was used for spreading Ni nanoparticles, and applied to methanol oxidation. The platform was obtained by calcination of a metal-organic framework (MOF) attached to graphene oxide. Nickel nanoparticles were then deposited on the nanocomposite by chemical reduction from a Ni²⁺ solution. The obtained electrocatalyst was characterized by different methods. An excellent electrocatalytic behavior was observed towards methanol oxidation in alkaline medium (j ~ 240 mA cm^?2 or ~ 626 mA mg^?1 in 1.0 M methanol). The results of methanol oxidation by various electrochemical studies (cyclic voltammetry, electrochemical impedance spectroscopy, chronoamperometry and chronopotentiometry) revealed the effective synergy between reduced graphene oxide, porous carbon material, ZrO₂ metal oxide and Ni nanoparticles. Good durability and stability of the proposed electrocatalyst and significantly increased current density of methanol oxidation suggest it as a potential alternative for Pt-based electrocatalysts in direct methanol fuel cells.