An authorization-based trust model for multiagent systems

In this paper an authorization-based trust model (ABTM) is described which is designed for managing access to services in a semi-open distributed environment. This is called a multiagent-based smart office environment. In this model, "trust" is defined as a set of authorization attributes that are granted by the owner of a service to the user of the service. Central to this model is a trust manager that redelegates authorizations from the service owner to the requesting user, based on access control policies that are specified by role labels which are assigned to a set of agents. The ABTM scheme is different from a centralized scheme, in which authorizations are granted directly by an authority. It is also different from a fully distributed system,where authorizations are granted based solely on the discretion of the owner of the services. The design philosophy is the separation of trust management and trust application to allow efficient management of access control in large-scale and dynamic environment, such as those that exist in multiagent systems.     

Effect of Fe2O3 crystallite size on its mechanochemical reaction with La2O3 to form LaFeO3

Fe₂O₃ powders with different crystallite sizes prepared by heating FeOOH at various temperatures were ground with La₂O₃ powder using a planetary ball mill to investigate the effect of crystallite size on mechanochemical synthesis of LaFeO₃. Fe₂O₃ powder with smaller crystallite size obtained by heating at lower temperature reacts more easily with La₂O₃ than that with larger size. The mechanochemical reaction proceeds with an increase in grinding time. Specific surface area of the LaFeO₃ powder synthesized has a large value of over 11 m²/g. The mechanochemical process can be also applied to synthesize other iron complex oxides with rare earth elements such as Pr, Nd and Sm.     

AC side harmonic and phenomena accompanying DC-injection of utility-interactive PV system

The experiments investigated phenomena related to direct contact between the DC output of a PV array and the AC power from the utility grid. The results show that the DC power flows through the distribution transformers (DC-injection) saturating their magnetic circuits. The saturation of magnetic circuits makes peak currents, incorporating a large portion of even harmonics, flow through the high-voltage side of the distribution transformer, adding the level of harmonic distortion of its exciting current. With the increase of injecting DC-current to the utility grid, peak currents at the primary side of distribution transformer increases the most, and even among the same effective (rms) values, the increase of primary side current is larger than that of the secondary side current.     

Multi-fluid multi-phase subchannel analysis of subassembly accidents of LMFRs

Analyses of experiments simulating hypothetical subassembly accidents such as a large-scale inlet blockage in a Liquid Metal Cooled Fast Reactor (LMFR) have been performed with computer program KAMUI. With the use of relatively simple but reasonable constitutive models, the code has been applied to the SCARABEE experiments BE+1 and APL1 to validate the analytical capability against the accident conditions under the multi-pin geometry. The results show that the key events such as sodium boiling, clad melting, molten clad relocation, molten clad freezing were adequately simulated taking into account the effect of heat loss to the coolant flow in the outside channel of the test section.     

A formation of compatible poly(vinyl alcohol)/alumina gel composite and its properties

A formation of poly(vinyl alcohol) (PVA)/alumina gel composite was investigated with a viewpoint of compatibility of the composite. An alumina sol was prepared from aluminium iso-propoxide (Al(iPro)₃). The alkoxide was hydrolyzed and the resultant hydrate was peptized to a clear sol with acetic acid. The composite were transparent in whole content of alumina. The effects of dispersed alumina on the sorption of water and mechanical properties of composite were examined. The composites containing PVA 40–50% are flexible. They are folded in various forms and can be drawn five times the initial length in humid state. The residues obtained by calcination to remove PVA at 600°C keep its original form and transparency.     

Effect of deformation mode,dynamic recrystallization and twinning on rolling texture evolution of AZ31 magnesium alloys

In order to obtain quantitative relationship between (0002) texture intensity and hot rolling conditions, conventional rolling experiments on AZ31 magnesium alloys were performed with 20%–40% reductions and temperatures within the range of 300–500 °C. Shear strain and equivalent strain distributions along the thickness of the rolled sheets were calculated experimentally using embedded pin in a rolling sheet. Rolling microstructures and textures in the sheet surface and center layers of the AZ31 alloys were measured by optical microscopy (OM), X-ray diffractometry (XRD) and electron back scatter diffraction (EBSD). Effects of the rolling strain, dynamic recrystallization (DRX) and twinning on the texture evolution of the AZ31 alloys were investigated quantitatively. It is found that the highest (0002) basal texture intensities are obtained at a starting rolling temperature of 400 °C under the same strain. Strain–temperature dependency of the (0002) texture intensity of the AZ31 alloy is derived.     

Several Geotechnical Design and Construction Issues with Akashi Strait Bridge

The Akashi Kaikyo (Strait) Bridge, one of the major bridges of the Honshu-Shikoku bridge network connecting the main island and the Shikoku island, is the world's longest suspension bridge with a center span of about 2,000 m. The bridge was constructed over the Akashi Strait and opened to traffic in 1998 after a construction period of about 10 years. The granite stratum in the Akashi Strait was very deep, while the granite stratum provides the foundations for the other long span bridges which have been constructed in Japan. Three of the four foundations had to be constructed on either a weakly cemented gravelly soil deposit or a sedimentary soft rock layer. The geological structure was carefully investigated and the geotechnical properties, in particular the strength and deformation characteristics of these geomaterial types, were carefully evaluated. To this end, a comprehensive series of advanced triaxial compression (TC) tests were performed on rotary core tube samples of sedimentary soft rock after it was found that the due design was not possible based on unconfined compression tests. Both CD and CU TC tests and cyclic undrained triaxial tests were performed on rotary core tube samples (30 cm in dia.) of the gravelly soil. Based on the data, the long-term and seismic stabilities of the foundations were evaluated. The importance of strain- and pressure-dependent nonlinear stress-strain behaviour at small strains, as well as accurate strain measurements in the laboratory stress-strain tests, was confirmed by analyzing the full-scale behaviour of the foundation during and after construction and comparing the back-calculated stiffness values with those obtained from laboratory stress-strain tests, pressure-meter tests, plate loading tests and field shear wave velocity measurements.     

Tyrosine-based poly(m-phenyleneethynylene-p-phenyleneethynylene)s. Helix folding and responsiveness to a base

The Sonogashira-Hagihara polymerization of 3′,5′-diiodo-N-α-tert-butoxycarbonyl-l-tyrosine methyl ester (1) and 3′,5′-diiodo-N-α-tert-butoxycarbonyl-O-methyl-l-tyrosine methyl ester (2) with para-diethynylbenzene (3) was carried out to obtain optically active poly(m-phenyleneethynylene-p-phenyleneethynylene)s [poly(1) and poly(2)] with M_n’s ranging from 9900 to 15,000 in 80-87% yields. Poly(1) exhibited intense CD signals in DMSO and THF, but did not in CH₂Cl₂, indicating that it took a predominantly one-handed helical conformation in the former two solvents. On the other hand, there was no evidence for poly(2) to take a helical structure in these solvents. Poly(1) turned the CD sign at 390 nm from plus to minus in DMSO/H₂O = 9/1 (v/v) by the addition of NaOH. Alkaline hydrolysis of ester moieties of poly(1) and poly(2) gave the corresponding polymers having carboxy groups [poly(1a) and poly(2a)]. Poly(1a) and poly(2a) increased the CD intensity by the addition of NaOH.