Material and velocity effects on cavitation erosion pitting

Cavitation erosion during the incubation period was investigated via pitting tests conducted on three different materials: an Aluminum alloy, a Nickel Aluminum Bronze alloy and a Duplex Stainless Steel. Pitting tests were conducted in a cavitation tunnel in the velocity range 45–90 m/s at a constant cavitation number. The test section was made of a straight nozzle 16 mm in diameter discharged into the radial 2.5 mm space between two flat walls. Cavitation appears in the form of a toroidal cavity attached to the nozzle exit and damage on the samples facing the nozzle is concentrated in a circular ring centered in the cavity closure region. The exposure time was adjusted to avoid pit overlapping. The material surface was examined using a conventional contact profilometer which allowed us to identify the pits, count them, and measure their main characteristics such as depth, surface area, and volume. From these the pitting rate, the coverage rate, and the depth of deformation rate were defined. Pits were classified according to their diameter. For all materials and operating conditions, pitting rate appears to follow an exponential law in relation to the pit diameter. This law depends upon two parameters only, which were identified as the coverage time τ (i.e. the time required for the surface to be covered by erosion pits) and a characteristic pit diameter δ, which corresponds to the pits whose contribution to the coverage process is the highest. Scaling laws for pitting were derived accounting for both material properties and flow velocity, and a procedure to make pitting test results non-dimensional is proposed. The influence of the material on pitting test results was analyzed. It is shown that the damage is not correlated in simple terms with the elastic limit determined from conventional tensile tests and it is conjectured that other parameters such as the strain rate might play a significant role and should be included in the analysis. The effect of flow velocity on both parameters τ and δ was analyzed and a classical power law was found for the influence of the flow velocity on pitting rate for all three materials. Finally, some analysis and discussion is given concerning distributions of pit volume and pit depth.     

Development of blown film linear low-density polyethylene–clay nanocomposites: Part A: Manufacturing process and morphology

In this study, linear low-density polyethylene (LLDPE)/clay nanocomposites with different clay contents were prepared by melt intercalation using two different compatibilizers: maleic anhydride grafted styrene–ethylene–butylene–styrene and maleic anhydride grafted polyethylene (PE-g-MA). Melt intercalation was achieved by twin extrusion and nanocomposite films were produced by blown film extrusion. Effects of clay and compatibilizer fractions and type of compatibilizer on the structure, permeability, and the barrier properties of the nanocomposite films were investigated. PE-g-MA was shown to notably improve the dispersion of clay layers in the polyethylene matrix, and this was examined by atomic force microscopy and X-ray diffraction. The latter tests have also highlighted the importance of the screw configuration: the presence of mixing elements favors the dispersion and distribution of nanoclay. Moreover, differential scanning calorimetry results have shown no significant effect of the clay on the crystallinity of the composite while thermogravimetric analysis tests have demonstrated a decrease of onset and peak of decomposition temperatures. Finally, barrier properties toward water vapor transmission were measured. It was proven that not also clay, but the compatibilizer participated in decreasing the permeability of the film. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48589.     

Granulometry,cluster analysis and spatial distribution of manganese contaminated soils,Kgwakgwe, southeastern Botswana

The particle size distribution (PSD) of 400 Mn contaminated soil samples was established, and generated data were statistically analysed and spatially presented. The PSD for the 53 µm – 4 µm size fraction soil samples ranged from 11.05 to 100 wt %, whereas that for < 4 µm was from 0.3 to 30 wt %. Texturally, samples were dominantly silt loam, although silt and sandy loam were also present, as well as loam, loamy sand and clay classes. Six clusters were identified with cluster one being the most dominant occurring in sandy loam, silt loam and loamy sand. The < 53 µm fraction had three dominant areas, and the < 4 µm fraction had several unevenly presented populations as reflected in the maps. Because of its spatial distribution, the < 4 µm fraction may pose hazards to human health. Furthermore, predominance of Mn limits land use to subsistence agriculture with possibly low crop yield.     

Values of the mass transfer coefficient of the linear driving force model for VOC adsorption on activated carbons

Modelling of activated carbon cartridges is essential in personal protective equipments against toxic gases in order to know the duration of protection. The linear driving force model seems to be more adapted than the actual Wheeler–Jonas model because it has more physical significance. The difficulty is that the mass transfer coefficient can not be calculated a priori. Values of the LDF mass transfer coefficient are disseminated in the literature and thus there is no overview of the range and variations with different adsorbents, adsorbates and concentrations. The object of this paper is thus twofold: obtaining values of the mass transfer coefficient at different concentrations and adsorbates in order to have a comprehensive view of variations and appreciating the validity of the LDF constant pattern model.     

Goal-directed responding is sensitive to lesions to the prelimbic cortex or basolateral nucleus of the amygdala but not to their disconnection.

The current view of instrumental conditioning indicates that performance in the early stage of training is maintained by a representation of the outcome, as indexed by its sensitivity to changes in the value of the reward. In the present study, the authors tested the effects of a disconnection of the prelimbic cortex (PL) and the basolateral nucleus of the amygdale (BLA), using an asymmetric lesion procedure, to determine whether these structures interact sequentially as part of a corticolimbic system. In marked contrast to the effects of bilateral lesions of the PL or the BLA, which both altered rats' sensitivity to outcome devaluation, the disconnection of these 2 brain areas was without an effect on outcome devaluation. These results demonstrate that the PL and the BLA mediate different aspects of outcome representation in goal-directed responding. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Nanofiltration for the recovery of caustic cleaning-in-place solutions: robustness towards large variations of composition

In the dairy industry re-use and multi-use cleaning-in-place (CIP) systems are operated by circulating chemicals and water without taking the equipment apart. The solutions, which become polluted due to the removal of fouling compounds, are drained periodically when they are considered to be too polluted. This work shows the large variations in composition (pollution, surface tension, etc) of the industrial caustic solutions coming from milk standardization and pasteurization plant CIP throughout their life time (7 days) and from 1 week to another. The work is also intended to show how nanofiltration (1 kg mol(-1) molecular weight cut-off) was robust and performed well, with good recovery of caustic solutions, even when faced with large variations of solutions composition: high caustic yield, permeation flux (J) in the range 42-110 l h(-1) m(-2), average chemical oxygen demand (COD) reduction equal to 0.58 and low surface tension change. Equations have been established for the prediction of J as a function of initial membrane hydraulic resistance (Rm) caustic concentration, volume reduction ratio (VRR) and initial soluble COD. When VRR increased, both J and pollution retention decreased despite the increase in irreversible fouling induced by the increase of soluble pollution concentration in retentate. The higher the initial soluble COD, the sharper the decrease in J vs. VRR. Since irreversible fouling was usually small (0.1-3.4 x 10(13) m(-1), that is to say of the same order of magnitude as Rm), the membrane cleaning could be efficiently performed by using single phase sodium hypochlorite alternately with a more expensive acid-base cleaning sequence. The obtained permeate was a clear regenerated cleaning solution with low soluble COD (0.2-3.5 g/l) and surface tension (56-30 mJ m(-2)) which could be successfully exploited owing to its cleaning potential.     

Thermodynamic interpretation of retention equilibrium in reversed-phase liquid chromatography based on enthalpy-entropy compensation

The fundamentals of the retention equilibrium in reversed-phase liquid chromatography (RPLC) are studied on the basis of enthalpy-entropy compensation (EEC). First, retention data were acquired and the influence of the nature of the compounds, organic solvent modifier, and temperature on these data was assessed. Then, the data were analyzed according to the four different methods proposed by Krug et al., and an EEC was formally established. Linear correlations were observed between the logarithm of the adsorption equilibrium constants under the different RPLC conditions, suggesting linear free energy relationships (LFERs). Finally, the variations of the retentions with the experimental conditions are shown to be quantitatively explained by a new model based on EEC. This model affords a comprehensive interpretation of the variations of retention originating from changes of either one parameter alone or several simultaneously. The slope and intercept of the LFER that relates two equilibrium systems are accounted for by the new model. The parameters of this model are the changes of enthalpy and entropy associated with the retention, the compensation temperatures, and the experimental conditions.     

Advertising an event

The paper considers a problem of how to minimize advertising costs to sell seats for a particular event, for instance, a sports game, a rock concert or a ballet performance. We take into consideration a word-of-mouth effect, which means that people buying a ticket tell their friends about it, so that advertising is unnecessary to inform those people.The problem is one of optimal control and the number of seats sold and the advertising effort of the organizers are the state and control variables, respectively. We show that, besides being dependent on the cost and revenue parameters, the optimal advertising policy is also affected by the length of the planning period and the relation between the number of seats and the total number of potential attendees.