Induction of superoxide dismutase isozymes by tumor necrosis factor-alpha and lipopolysaccharide in cultured normal and hyperplastic gingival fibroblasts

We studied 722 reexcision scars of benign and malignant lesions (except melanocytic lesions) excised over a 24-month period. The formalin-fixed, paraffin-embedded tissue sections were examined histologically and immunohistochemically. The histological features of melanocytic hyperplasia were present in 59 cases (8%), 56 from the sun-exposed skin of the face and neck and three from the trunk [p < 0.00001]. The most common sites were the nose and lower eyelids, but the forehead was also frequently involved. Of the 59 patients, 41 were women (p < 0.0001). Basal cell carcinoma was the most frequent original lesion in both sexes (80%). No melanocytic hyperplasia was found in 663 cases (298 on the trunk and extremities and 365 on the head and neck). We have seen this reaction pattern following reexcision of melanocytic lesions as well. Thus, interpreting reexcision margins when lentigo maligna or similar lesions are reexcised may be fraught with difficulty. It is important for pathologists and dermatopathologists to recognize this phenomenon because histologically the presence of increased numbers of large melanocytes could be misinterpreted as melanoma in situ.     

小浪底斜心墙堆石坝的地震反应分析

采用等价粘弹性动力有限元模型，结合有效应力法，对黄河小浪底斜心墙堆石坝最终设计断面在淤积后期受地震作用的动力特性进行了分析。分析时考虑了淤积土体内有未消散的超静孔压。结果表明明，坝体受里氏６．５级地震时，下游坝基及上游淤土表层均有一定范围的液化区，由于坝基液化区距坝体较远，因而只影响到坝趾压戗的局部；当坝体受里氏８级地震时，坝趾下游近处的坝基沙砾石处于液化状态，上游库区淤土有较大较范围的液化区，在     

多媒体音频设备驱动程序的结构和原理

本文以波形音频输入输出为样本，剖析了Ｗｉｎｄｏｗｓ音频设备驱动程序的结构和原理。Ｗｉｎｄｏｗｓ设备驱动程序为应用提供了可扩展，设备无关，一致的接口。本文给出了数字波形数据Ｉ／Ｏ的处理过程，以及应用程序，驱动程序和音频硬件的层次关系。     

分子结构对增塑聚氯乙烯性能的影响

研究了聚合度、分子量分布和支化结构对增塑聚氯乙烯加工流变性能和物理力学性能的影响。结果表明，增塑ＰＶＣ的加工流变性能随聚合度的增加而恶化；拓宽分子量分布和引入支化结构均有利于加工流变性能的提高；增塑ＰＶＣ的拉伸强度随聚合度的增加而提高，而压缩永久变形却随之减小；分子量分布对物理力学性能的影响不大；支化ＰＶＣ的拉伸强度略有下降。     

ATM局域网仿真技术

本文介绍了ＡＴＭ局域网仿真技术并从ＡＴＭ仿真局网的组成、工作原理等方面介绍了这一技术的主要特点。     

Deformation analysis of skew ruled surface shells by moiré interference

The use of thin film grids coated on surfaces is described in relation to the determination of deformations in doubly curved shells. The technique is called the coating film moiré interference method and employs a laser holographic approach.     

PTC－BaTiO_3射频溅射用靶材的制备

研究了用于射频溅射ＰＴＣ－ＢａＴｉＯ_３薄膜的厚大靶材制备工艺，所制成的靶材的室温电阻率为８００Ω·ｃｍ，ＰＴＣ效应＞１０５，平均粒径为１～３μｍ，讨论了配方中ＴｉＯ_２品种的选择、施受主添加剂的搭配与掺量以及烧成中的升降温速率对于ＰＴＣ效应的影响