New concept of surface modification to LiCoO2

As the continuance of our series study on LiCoO₂ surface modification, the complicated traditional surface coating method is replaced with simple addition of amorphous YPO₄ and Al₂O₃ in commercial LiCoO₂ or in commercial electrolyte based on our understanding to the improvement mechanism of surface modification. Comprehensive studies by X-ray photoelectron spectroscopy (XPS), gas chromatography and mass spectroscopy (GC–MS), inductively coupled plasma (ICP) and Fourier transformed infrared (FTIR) indicate that the products of spontaneous reaction between the additive and the LiPF₆ based electrolyte are responsible for the performance improvements.     

地下燃气调压设施的建设与管理

介绍了地下燃气调压井的建设和管理经验，提出了在城市燃气输配系统中地下调压井的选择。     

新型阳离子聚丙烯酰胺微粒的研究 Ⅱ.含PEO支链阳离子聚丙烯酰胺微粒的絮凝性能

以丙烯酰胺、丙烯酰氧基乙基三甲基氯化铵、聚氧乙烯大单体和N ,N’ -亚甲基双丙烯酰胺为单体 ,进行四元反相微乳液共聚合 ,制备出新型含PEO支链的阳离子微粒絮凝剂。然后用该微粒絮凝剂分别对针叶木纸浆和特种纸白水进行了助留和絮凝性能的研究 ,结果表明 ,本新型微粒具有能单独使用、絮凝效果好和抗剪切性强等优点。     

Wave-attenuation estimation in fluid-filled steel pipes: The first longitudinal guided wave mode

Attenuations of the first (or fundamental) longitudinal guided wave modes propagating in liquid-filled steel pipes are numerically investigated. Several filling liquids transported by the steel pipe are considered in the investigation. In the numerical modeling stage, a sink is considered for abandoning standing wave modes caused by the internal liquids; hence, the attenuation dispersion curves become simpler. From the attenuation dispersion curves, two specific attenuation values corresponding to 1 MHz and 2.68 MHz are selected; then, the concept of parametric density is introduced to predict attenuation for a certain filling material. With this concept, it is possible to approximately calculate attenuation values without a complex numerical attenuation calculation. This investigation may provide fundamental data to inspectors using ultrasonic guided-wave techniques in the petrochemical industry and in the field of water supply, two branches of the economy that are always under pressure owing to the demand of increasing productivity and that are challenged owing to stricter environmental rules, thus necessitating promising, low-cost inspection techniques. The text was submitted by the authors in English.     

新型阳离子聚丙烯酰胺微粒的研究--含PEO支链阳离子聚丙烯酰胺微粒的合成、助留性能及作用机理

本文采用反相微乳液聚合的方法合成了丙烯酰胺(AM)/丙烯酰氧基乙基三甲基氯化铵(AD-AMQUAT)/聚氧乙烯大单体(PEO-A)/N,N'-亚甲基双丙烯酰胺(Bis)的四元共聚物微粒.研究了该微粒助留剂的结构与性能.这种微粒和纸纤维能够通过离子键和氢键作用显著地增强助留效果.     

YAG：Ce Phosphors for WLED via Nano-Pesudoboehmite Sol-Gel Route

The sub-micron sized YAG ： Ce phosphors were synthesized via a modified sol-gel method by peptizing nano-pesudoboehmite particulate. It is found that YAG phase from the dried gel powders appears at 1000 ℃ then the pure YAG phase exists at a relatively lower sintering temperature of 1400 ℃. The smaller sizes of phosphors in the ranges of 1 - 3 μm are obtained due to the contribution of seeding effects of nano-sized alumina particles to strengthen each step of the processes. Both the excitation and emission spectra of photoluminescence of the phosphor obtained at 1400 ℃ meet well with the spectroscopic requirements of the WLED phosphors.     

郁江梯级水电站群联合优化调度初探

郁江梯级水电站群由西津、仙依滩和桂航3座水电厂组成。针对西津电厂出力变化频繁,加上西津下游两电厂装机容量较小,经常出现弃水,用增量动态规划法进行了联合优化调度探索,同时介绍马斯京根分段流量演算法。     

粒子群优化算法及其应用

粒子群优化（PSO）算法是一种新颖的演化算法，它属于一类随机全局优化技术，PSO算法通过粒子间的相互作用在复杂搜索空间中发现最优区域。PSO的优势在于简单而又功能强大。介绍了基本的PSO算法、研究现状及其应用，并讨论将来可能的研究内容。     

引黄入晋工程"TBM"掘进引水隧洞塌方处理

本文叙述了在山西万家寨引黄入晋工程中总干线7号隧洞用T BM掘进后洞中心线出现较大超差,在处理施工中土体又发生塌方,经采取塌方段两端先加强支护,用平行梁递进法封闭顶拱,再用小导管灌浆加固未塌方段土体,然后继续进行作业的塌方处理过程。。     

动态电接触模拟测试系统

为研究微动引起的失效机理,本文设计并研制了动态电接触模拟测试系统,用于模拟连接器微动过程,测试微动过程中触点的电性能.文章介绍了该系统的构成、功能、工作原理,并给出了微动、加力装置、计算机软件控制等主要部分的设计方案.