Comparison of influences of NaCl and CaCl2 on the corrosion of 11% and 17% Cr ferritic stainless steels during cyclic corrosion test

During the drying stage of the cyclic corrosion test on ferritic stainless steels in the NaCl environment, the current abruptly increased and then decreased to nearly zero, indicating that pits are initiated as the salt concentration is increased, which are then repassivated when the surface is completely dry. During the wet stage, the current remained high, suggesting that pits mainly propagate during the wet stage. In contrast, in the cyclic corrosion test in the CaCl₂ environment, the current was highest during the drying stage, indicating that the electrolyte is not completely dried and corrosion mainly propagates during the drying stage.     

Effects of the addition of hemp powder on the physicochemical properties and energy bar qualities of extruded rice

Extruded rice/hemp mixtures were prepared by mixing defatted and whole hemp powders with rice flour at varying hemp levels (0%, 20%, 30% and 40%). The influence of hemp powder type and level on physicochemical and antioxidant properties was studied. The bulk densities of the extruded rice/hemp samples increased with increase in levels of added hemp powder. The extrudates blended with hemp powder had a lower water absorption index than the control (extruded rice without hemp). The extruded rice/whole hemp had more total phenolics and flavonoids and had a better scavenging effect on DPPH radicals than extruded rice/defatted hemp. The highest potential to inhibit β-carotene oxidation was found in extruded rice/40% whole hemp. Increasing amounts of hemp powder resulted in lower equilibrium moisture content of energy bars. The energy bar made with extruded rice/20% whole hemp was preferred for colour, taste and overall acceptability.     

DNA/Tannic Acid Hybrid Gel Exhibiting Biodegradability,Extensibility, Tissue Adhesiveness,and Hemostatic Ability

DNA has emerged as a novel material in many areas of materials science due to its programmability. Especially, DNA hydrogels have been studied to incorporate new functions into gels. To date, only a few methods have been developed for fabricating DNA hydrogels, such as the use of complementary sequences or covalent bond. Herein, it is demonstrated that one of the most well‐known plant‐derived polyphenols, tannic acid (TA), can form a DNA hydrogel which is named TNA hydrogel ( T A + D NA ). TA plays a role as a “molecular glue” by a new mode of action reversibly connecting between phosphodiester bonds, which is different from the crosslinking utilizing complementary sequences. TA intrinsically degrades due to ester bonds connecting between pyrogallol groups, causing a degradable DNA hydrogel. Furthermore, TNA gel is multifunctional in that the gel is extensible upon pulling and adhesive to tissues because of the rich polyphenol groups in TA (ten phenols per TA). Unexpectedly, TNA gel exhibits superior in vivo hemostatic ability that can be useful for biomedical applications. This new DNA hydrogel preparation method represents a new technique for fabricating a large amount of DNA‐based hemostatic hydrogel without chemically modifying DNA or requiring the crosslinking by complementary sequences.     

Fabrication of protective-coated SiC reinforced tungsten matrix composites with reduced reaction phases by spark plasma sintering

SiC reinforced tungsten matrix composites were fabricated via the spark plasma sintering process. In order to prevent an interfacial reaction between the SiC and tungsten during sintering, TiOx coated SiC particles were synthesized by a solution-based process. TiOx layer coated SiC particles were treated in high temperature nitriding conditions or annealed in a high temperature vacuum to form TiN or TiC coated SiC particles, respectively. The TiC layers coated on SiC particles successfully prevented tungsten from reacting with SiC; hence the proposed process resulted in successful fabrication of the SiC/W composites. The mechanical properties such as compressive strength and flexural strength of the composites were measured. Additionally, the effect of SiC on the high temperature oxidative ablation of tungsten was also investigated. The addition of SiC resulted in an improved oxidative ablation resistance of the tungsten-based composites.     

Effects of work hardening models on low-cycle fatigue evaluations of coiled tubing with CT-100 steel

In the present study, low-cycle fatigue life of a coiled tubing (CT) with a CT-100 steel was evaluated by using various work hardening models. Tensile and low-cycle fatigue tests were performed, and experimental results were used to calibrate material model constants. A nonlinear finite element model was constructed in the ABAQUS program by using a CT fatigue test machine. During the test cycles, bending and straightening conditions were repeated and histories of strains were collected. The multiaxial low-cycle fatigue life was calculated by using Manson–Coffin relation and Tresca criterion. The kinematic and combined hardening models can be used to evaluate the fatigue life of CT, and their results are conservative compared with the fatigue test results. Results of the present study can be used as the basic data in establishing CT fatigue analysis.     

Quantitative analysis of microbial community structure in two-phase anaerobic digesters treating food wastewater

An acidogenic reactor with a 0.5-L working volume and a methanogenic digester with a 5-L of working volume were operated for 150 days on a continuous mode to investigate the structure of a microbial community during food wastewater treatment. During the steady state of anaerobic digestion, volatile solids (VS) removal efficiency in the pilot plant was approximately 65%. The bacterial population was higher than any other methanogens detected during the entire anaerobic process and treatment of raw food wastewater. Methanomicrobiales (MMB), Methanosarcinales (MSL), and Methanobacteriales (MBT) were detected during digestion. The methanogenic population present in the acidogenic reactor was directly affected by the archaeal community in raw food wastewater. However, the shift of microbial community in the methanogenic digester was relatively gradual. The performance of methanogenic digester might be more related to the change of microbial metabolism affected by the physicochemical properties of the input substrate.     

Evaluation of Three-Dimensional Bioprinted Human Cartilage Powder Combined with Micronized Subcutaneous Adipose Tissues for the Repair of Osteochondral Defects in Beagle Dogs

Cartilage lesions are difficult to repair due to low vascular distribution and may progress into osteoarthritis. Despite numerous attempts in the past, there is no proven method to regenerate hyaline cartilage. The purpose of this study was to investigate the ability to use a 3D printed biomatrix to repair a critical size femoral chondral defect using a canine weight-bearing model. The biomatrix was comprised of human costal-derived cartilage powder, micronized adipose tissue, and fibrin glue. Bilateral femoral condyle defects were treated on 12 mature beagles staged 12 weeks apart. Four groups, one control and three experimental, were used. Animals were euthanized at 32 weeks to collect samples. Significant differences between control and experimental groups were found in both regeneration pattern and tissue composition. In results, we observed that the experimental group with the treatment with cartilage powder and adipose tissue alleviated the inflammatory response. Moreover, it was found that the MOCART score was higher, and cartilage repair was more organized than in the other groups, suggesting that a combination of cartilage powder and adipose tissue has the potential to repair cartilage with a similarity to normal cartilage. Microscopically, there was a well-defined cartilage-like structure in which the mid junction below the surface layer was surrounded by a matrix composed of collagen type I, II, and proteoglycans. MRI examination revealed significant reduction of the inflammation level and progression of a cartilage-like growth in the experimental group. This canine study suggests a promising new surgical treatment for cartilage lesions.     

Genetic Diversity and Association Analysis for Carotenoid Content among Sprouts of Cowpea (Vigna unguiculata L. Walp)

The development and promotion of biofortified foods plants are a sustainable strategy for supplying essential micronutrients for human health and nutrition. We set out to identify quantitative trait loci (QTL) associated with carotenoid content in cowpea sprouts. The contents of carotenoids, including lutein, zeaxanthin, and β-carotene in sprouts of 125 accessions were quantified via high-performance liquid chromatography. Significant variation existed in the profiles of the different carotenoids. Lutein was the most abundant (58 ± 12.8 mg/100 g), followed by zeaxanthin (14.7 ± 3.1 mg/100 g) and β-carotene (13.2 ± 2.9 mg/100 g). A strong positive correlation was observed among the carotenoid compounds (r ≥ 0.87), indicating they can be improved concurrently. The accessions were distributed into three groups, following their carotenoid profiles, with accession C044 having the highest sprout carotenoid content in a single cluster. A total of 3120 genome-wide SNPs were tested for association analysis, which revealed that carotenoid biosynthesis in cowpea sprouts is a polygenic trait controlled by genes with additive and dominance effects. Seven loci were significantly associated with the variation in carotenoid content. The evidence of variation in carotenoid content and genomic regions controlling the trait creates an avenue for breeding cowpea varieties with enhanced sprouts carotenoid content.     

Emulsifier Effects on Pasting Properties of Wheat Flour Extrudates with/without Sucrose and Shortening

The objective of this study was to determine the effects of emulsifier types and concentrations, plus the addition of sucrose and shortening on wheat flour extrudates. Ground extrudate pasting properties were measured in the rapid viscoanalyser (RVA). Four pasting parameters were determined from the RVA curve: peak time (PT), peak viscosity (P), breakdown viscosity (H), and initial slope (IS). Emulsifier types and the addition of sucrose and shortening significantly affected PT, P, H, and IS. Emulsifier concentration significantly influenced PT and H. Emulsifiers significantly increased PT and H and decreased P and IS. Glyceryl monostearate had the greatest effects on these parameters. Sucrose and shortening generally enhanced the effects of emulsifiers on pasting properties.