Structural material from waste plastic

In efforts to contribute to community development, particularly in the context of Egyptian communities, waste plastics materials were successfully recycled without the difficult task of separation and reused to economically produce new structural material. Recycling was performed by mixing molten waste plastics with sand to produce these new materials. Samples with different percentages of plastics and different particle sizes of sand were used in the process. Materials showed acceptable density and high compressive strength, which was shown to be at a maximum with contents of about 30–40% waste plastic. Furthermore, certain types of sand having different colors were used to produce attractive materials, suitable for decorative uses. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2543–2547, 2004     

Consistency of randomized and finite sized decision tree ensembles

Regression via classification (RvC) is a method in which a regression problem is converted into a classification problem. A discretization process is used to covert continuous target value to classes. The discretized data can be used with classifiers as a classification problem. In this paper, we use a discretization method, Extreme Randomized Discretization, in which bin boundaries are created randomly to create ensembles. We present an ensemble method for RvC problems. We show theoretically for a set of problems that if the number of bins is three, the proposed ensembles for RvC perform better than RvC with the equal-width discretization method. We use these results to show that infinite-sized ensembles, consisting of finite-sized decision trees, created by a pure randomized method (split points are created randomly), are not consistent. We also theoretically show, using a set of regression problems, that the performance of these ensembles is dependent on the size of member decision trees.     

Preparation and characterization of carboxylic cation exchange resins from the reaction of poly(vinyl alcohol) with melamine-formaldehyde and some hydroxy acids

The synthesis of cation exchange resins via the reaction of poly(vinyl alcohol) as a carrier, citric acid as a catalyst and reactive additive to produce resin structures with grafted carboxy groups, along with a melamine-formaldehyde precondensate, responsible for crosslinking-reinforcing and insolubilizing the resin structure as well as for fixing and binding the acidic functional groups onto the resin structure, has been investigated using varied molar ratios of reactants and varied time as well as temperature. Reaction conditions were selected to prepare a cation exchange resin based on citric acid. Two other cation exchange resins based on tartaric acid and glycolic acid, were also prepared under the same selected reaction conditions. These three resins were characterized by potentiometric titration, water solubility and swellability, as well as durability to use.     

Effects of cobalt and potassium doping on thermal stability and electrical properties of radiation grafted acrylic acid onto poly(tetrafluoroethylene ethylene) copolymer films

Grafted copolymer of poly(tetrafluoroethylene ethylene) (ET) with acrylic acid (AAc) was prepared by direct radiation method. The obtained films were modified by treating with small amounts of Co²⁺ and K⁺ ions (1.0 wt %). The effects of such treatment on the thermal stability and electrical conductivity of these films were studied. Cobalt treatment did not much affect the thermal degradation of the films. The results obtained revealed that k⁺ treatment enhanced the thermal degradation of ET‐g‐PAAc, which started 273 K lower than that observed in the case of the untreated and Co²⁺‐treated films. Potassium and cobalt treatment of the investigated films increased their electrical conductivity (σ) and decreased the activation energy ΔE_σ. The increase in σ values was, however, more pronounced in the case of K⁺‐treated film. These results were discussed in terms of the effective increase in the hydrophilicity of the films, especially those treated with potassium. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 867–871, 2005     

Poly(Li‐2‐hydroxyethyl methacrylate)‐co‐poly(4‐vinyl pyridine): Molar mass effects on strong electrorheological response

Electrorheological (ER) fluids display remarkable rheological behavior, being able to convert rapidly and repeatedly from a fluid to a solid‐like when an external electric field (E) is applied or removed. In this study, electrical and ER properties of poly(Li‐2‐hydroxyethyl methacrylate)‐co‐poly(4‐vinyl pyridine), poly(Li‐HEMA)‐co‐poly(4‐VP), copolymeric salts (ionomers) were investigated. For this purpose six ionomers were synthesized with different molar masses. They were then ground‐milled for a few hours to obtain micron size ionomers. The particle sizes of the ionomers were determined by dynamic light scattering. Suspensions of ionomers were prepared in silicone oil (SO), at a series of concentrations (c = 5–30%, m/m). The gravitational stability of suspensions against sedimentation was determined at constant temperature (T = 25°C). Flow times of the suspensions were measured under no electric field (E = 0 kV/mm), and under an external applied electric field (E ≠ 0 kV/mm) strengths and a strong ER activities were observed for all the poly(Li‐HEMA)‐co‐poly(4‐VP)/SO suspensions. Further, the effects of suspension concentration, mole ratios of poly(HEMA) and poly(4‐VP), and the overall molar mass of the copolymers, shear rate, electric field strength, frequency, promoter, and temperature onto ER activities of ionomer suspensions were investigated. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1065–1074, 2006     

Oil thermal annealed nano‐structured indium tin oxide thin films for display applications

Indium tin oxide‐coated thin films (200 nm) are deposited on glass substrates by using R.f. sputtering technique. Here, we investigate the influence of new technique of treatment, which is called as “oil thermal annealing” on the nano‐structured indium tin oxide thin films at fixed temperature (150 °C) which improves adhesion strength, electrical conductivity and optical properties (transmittance) of the films. Oil thermal annealing is used to reduce inherent defects that may be introduced during the prepared thin film and cooling processes. Proposed technique is highly suitable for liquid crystal displays, solar cells and organic light emitting diodes, and many other display‐related applications.     

Processing of an East Mediterranean phosphate ore sample by an integrated attrition scrubbing/classification scheme (part one)

ABSTRACT

In this study, an Egyptian siliceous/calcareous sedimentary phosphorite was subjected to beneficiation by unsophisticated economic means. The mineralogical and chemical examination showed that the ore sample is a typical example for the East Mediterranean phosphorites with 21.80% P₂O₅, 10.93% acid insoluble and 16.61% loss on ignition. The primary crushed sample was classified into three size fractions without any milling and they were separately subjected to an integrated attrition scrubbing study. Screening and classification on the 2.30 mm and 0.071 mm sieves were sequentially introduced with the attrition process. The effect of solid%, attrition speed and time were studied and optimized for each size fraction. Results showed that three products were produced and could be categorized according to their P₂O₅ content into the coarse tailing (+2.30 mm), the attrition concentrate (?2.30 + 0.071 mm) and the phosphate fines (?0.071 mm). The P₂O₅ contents of these products reached 12.24%, 28.72% and 18.77%, with P₂O₅ distribution reached 6.74%, 51.75% and 41.51%, respectively. A global P₂O₅ of 28.72% was obtained with a recovery of about 52%. A tentative flow-sheet for the whole process was postulated.     

Nanoscratch testing to assess the fiber adhesion of short‐carbon‐fiber composites

In a composite material, the degree of adhesion between the fiber and the matrix plays an important role in the overall performance of the material. Because the load between the fiber and the matrix is realized throughout the interphase region material, a lot of effort has gone into characterizing the strength of the interphase. In this study, nanoscratch tests on the composite samples were used to provide a relative measure of adhesion in different composite materials. Carbon‐filled nylon 6,6 and polycarbonate resins were evaluated with this method. The carbon fillers we used were polyacrylonitrile‐based carbon fibers sized and surface‐treated for the respective matrix and pitch‐based carbon fibers without any sizing or surface treatment. Tensile and X‐ray photoelectron spectroscopy data for the composites we considered are also presented to compare to the nanoscratch results. It is shown that nanoscratch testing on the composites, with the proposed data analysis, can be an effective tool for determining the relative degree of adhesion between different composites. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 328–335, 2007     

Dependence of soiling and soil release of easy care cotton on factors-controlling the finishing treatment

The conventional pad-dry-cure method was used for effecting crosslinking of cotton with N-methylol finishing agents under different conditions. Factors studied include nature and concentration of finishing agent and softener, type and concentration of catalyst, and curing temperatures. Variation of soiling and soil release characteristics of crosslinked cotton with these factors were investigated. The effect of finishing agent on aqueous soiling followed the order: Carbamate reactant-fabric > Dimethylolethylene urea-fabric > Dimethyloldihydroxyethylene urea-fabric > Untreated fabric > Modified triazinone-fabric ≥ Modified ethylene urea-fabric. On the other hand, the effect of these finishing agents was to enhance the susceptibility of the fabric to oily soiling. Nevertheless, nature of the finishing agent governed the magnitude of this enhancement. Aqueous and oily soil release depended also upon the nature of finishing agent, soiling increased and soil release decreased by increasing finishing agent concentration. Type of catalyst exerted a considerable influence on aqueous and oily soil release without significantly affecting the degree of soiling. For aqueous soil release, the following order was found: Al₂(SO₄)₃ · 18H₂O > MgCl₂ · 6H₂O > urea nitrate > ZnCl₂ · 6H₂O > Zn(NO₃)₂ · 6H₂O > urea phosphate > urea oxalate > NH₄ · H₂PO₄ ≥ NH₄Cl. A reverse order held good for oily soil release. Both aqueous and oily soil release were impaired by increasing catalyst concentration. Similarly, nature and concentration of the softener had no striking effect on soiling while they did on soil release. Raising the curing temperature from 80 to 140°C caused substantial reduction in case of soil removal of urea salts catalyzed-crosslinked cotton samples while having the degree of soiling practically intact.     

Effect of processing on the composition and oxidative stability of coconut oil

The effect of various processing procedures on the composition and oxidative stability of coconut oil has been studied. The crude oil is relatively stable but major reductions in oxidative stability occur during the bleaching of oil degummed with phosphoric acid; during alkali refining; during the deodorization of oil degummed with citric acid and bleached; and during the deodorization of oil processed with a combined phosphoric acid degumming and bleaching operation. The reasons for the loss of oxidative stability during processing are discussed with reference to changes in the composition of the oil. Residual traces of citric acid or phosphoric acid play an important role in stabilizing processed oils. The tocopherol content is also important, although no additional stabilization of the oil occurs on adding levels of tocopherol above those present naturally in the crude oil. A combined phosphoric acid degumming and bleaching process leads to smaller losses of tocopherols than sequential treatments.