Voluntary and professional disaster-workers: similarities and differences in reactions

Forty-three rescuers responding to a bus crash that killed 12 children and 4 adults and injured many more answered questionnaires at 1 and 13 months following the crash. This study compared the responses of the voluntary and professional helpers, using the Impact of Event Scale (IES) and the General Health Questionnaire (GHQ). For all helpers taken together, the decline in IES-intrusion and IES-total scores was significant from 1 to 13 months. The voluntary helpers reported significantly more intrusion and avoidance on the IES at 1 month than professional helpers, and for avoidance the voluntary helpers still evidenced a significantly higher score than professional helpers at 13 months. The GHQ scores at 13 months reflected that the long-term negative impact of the event was low.     

太钢4号高炉喷煤站应用MFD—Ⅲ型布袋除尘器的实践

太钢４号高炉喷煤站从１９９０年起采用ＭＦＤ－Ⅲ型脉动反吹式布袋除尘器。这种除尘器采用脉动式反吹清灰设施，合理布置布袋间距，布袋支撑骨架及选用针呢材质的布袋，过滤面积大，反吹清灰效果好，设备运行平稳，除尘效率高达９９．８％，排放浓度小于１０ｍｇ／ｍ＾３，故障率低。     

Alkali-metal Na Adsorption and Promoted Oxidation on Si(100)2×1 Surface

The alkali-metal Na adsorption on Si(100)2×1 surface and its promoted oxidation and Si oxidegrowth have been investigated by means of thermal desorption,work function,Auger electronspectroscopy and photoemission electron spectroscopy.The experimental data showed that therewas a new state,interface electron state,near the Fermi level after the deposition of Na atoms.It wasfound that the presence of Na always caused an increase of the oxygen initial uptake whereas thepromotion of Si oxide growth was observed only at the coverage of Na greater than 0.5 ML.A newmechanism of Na-promoted Si oxide growth is suggested in this paper.     

钢管内径光电检测装置

介绍了一种检测细长钢管内径的光电检测装置。该装置利用线阵ＣＣＤ作传感器，采用８０３１单片机作为主控制。     

抽油机减速器齿轮的失效分析

找出了人字齿轮减速器在工作中右端齿轮出现严重磨损的原因并进行了分析。提出在国内现有制造技术的条件下，对于37kN·m以下的减速器应推广使用斜齿轮传动。     

无压三产品重介旋流器大型化问题探讨

对淮南矿业集团选煤厂目前使用的1200/850型无压三产品重介旋流器和改扩建方案中采用的1400/1050型进行了对比分析,认为无压三产品重介旋流器大型化后需要增加煤泥重介系统,并未达到提高效率、简化工艺、降低消耗的目的,而且还会影响后续作业,增加大量设备以及运行费用和维修量;无压三产品重介旋流器大型化应以有效分选下限0.5mm为标准。     

蒸汽凝结水除油试验研究

介绍了利用类萃取技术进行蒸汽凝结水除油的过程。利用具有亲油功能的HOL-100树脂,经过试验和工业应用证明,萃取除油可以达到1．0mg/L以下,可满足炼油化工装置锅炉用水对含油量的要求。HOL-100树脂具有在高温状态下(120℃)除油的特点。通过标定考核,萃取除油技术是一项节能、节水、环保措施,可在中石油和中石化企业推广应用。     

新型改性有机硅防水剂合成工艺研究

利用丙烯酸系单体对普通有机硅防水剂进行改性,合成一种新型的改性有机硅防水剂。丙烯酸系单体比例为5%～13%,A、B2种表面活性剂复合使用且m(A)∶m(B)=1∶1时,对有机硅的改性效果最好。     

基于高速双DSP的柔性机载实时图像跟踪系统研究

给出了以两片高性能TMS320C6414作为核心处理器，并辅以FPGA来实现系统逻辑时序控制，从而组成双DSP柔性机载实时图像处理系统的设计方案。同时对系统的硬件资源选择及工作流程进行了讨论。     

LNG气化站自控仪表系统设计方案探讨

依据LNG存储和气化工艺以及生产管理对自控仪表系统的要求,介绍LNG气化站自控仪表系统设计过程应进行研究的几个主要环节,并对其设计原则及系统结构进行了概述,以满足供气工况的要求。