Monte Carlo despeckling of transrectal ultrasound images of the prostate

In this paper, a novel stochastic method is developed for despeckling transrectal ultrasound (TRUS) images of the prostate. By incorporating the circular probe acquisition particularities and speckle noise statistics of TRUS images of the prostate into a likelihood-weighted Monte Carlo estimation scheme, the proposed method can better remove speckle noise while preserving image structures and details that are relevant for image screening, allowing for a better delineation of the lesion contour. Our in silico and in vivo experimental results are promising, which was confirmed by a clinical evaluation of the in vivo test cases by experienced clinicians, and indicate that our method potentially can perform better than other previously proposed methods.     

酚醛树脂-CarboresP结合镁碳材料的性能与应用

研究了环境友好型含碳材料CarboresP在镁碳砖中的应用。采用MT14A镁碳砖生产工艺,改变CarboresP的加入量,对试样180℃处理后的体积密度、高温抗折强度(1400℃),以及1000℃埋炭处理后的显气孔率、耐压强度等指标进行了研究和对比,确定镁碳砖中合适的CarboresP添加量为1%,并且可适量降低金属防氧化剂的加入量;分析了酚醛树脂-CarboresP结合炭的显微结构,表明其为均质炭和非均质石墨化炭的混合结构,这将有助于改善炭化结构的抗氧化性能;采用尖劈试验绘制镁碳砖试样的应力-应变曲线,表明添加CarboresP的镁碳砖的特征长度LCH值得到明显提高,说明它具有很好的韧性和吸收应力的能力;与传统工艺生产的MT14A镁碳砖相比较,采用酚醛树脂-CarboresP“软性结合”工艺生产的MT14A镁碳砖,成型性能及热处理后各项性能指标均得到改善,在国内某40tLF-VD精炼钢包渣线上进行现场使用证明,平均使用寿命比现用渣线镁碳砖提高18.4%。     

Inside this month

This issue contains a preview of the CFA’s annual trade show, which this year takes place in Anaheim, California. Those of you who also attend the JEC Composites Show in Paris will see a vast difference between these two events, not only in cultural terms but also in focus. CFA is an association for US manufacturers and its show places a high emphasis on education and networking. JEC’s slant is to the end-user and it strives to be a showcase for composites technology. Both of these approaches are to the ultimate benefit of the composites industry, but as companies continue to look at ways of spending their money more effectively, show attendance is one area coming under increasing scrutiny. Many have been saying that it is too expensive to attend JEC every year and now a group of major resin suppliers, including DSM, Reichhold, Ashland and Cray Valley, have taken the step of staying away from next year’s show (see page 64). This will surely dent the show’s profits and it will be interesting to see how the organisers, as well as other exhibitors, will respond to this development.     

A study on the moisture sorption characteristics in woven sisal fabric reinforced natural rubber biocomposites

Textile biocomposites were prepared by reinforcing natural rubber with woven sisal fabric. Sisal fabric was subjected to various chemical modifications like mercerization, silanization, and thermal treatment. The moisture uptake of the textile composites was found to depend upon fiber content as well as architecture. The mechanism of diffusion in the composites was found to be fickian in nature. The effect of chemical modification of sisal fabric on moisture uptake was also analyzed. Mercerization was seen to increase the water uptake in the composites while thermally treated fabric reinforced composites exhibited lower water uptake. The influence of temperature on water sorption of the biocomposites is also analyzed. The thermodynamic parameters of the sorption process were also evaluated. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 416–423, 2006     

Rheological properties of bitumen in water emulsions with added solids

Experimental work was carried out to investigate the rheological properties of bitumen in water emulsions containing solids of different shape and size. The bitumen volumetric concentration was varied up to 60%, solids free basis, and the solids volume fraction (total volume basis) was varied up to 0.2. Irregular-shaped silica sand (average diameter: 9 and 33 μm) and smooth spherical glass beads (average diameter: 27 and 44 μm) were used as the added solids. In the low shear stress range, shear thinning behavior was observed for bitumen in water emulsions. At high shear stress, the viscosity of the emulsions became fairly independent of the shear stress. The addition of solids to the bitumen emulsions increased the mixture viscosity. The addition of irregular-shaped silica sand gave a higher viscosity than a similar addition of the spherical glass beads. The viscosity of the emulsion/solids mixtures was influenced by the solids size as well; the smaller size particles gave a higher viscosity. The addition of solids to the bitumen emulsions also induced shear thickening (dilatancy) behavior at high solids volume fraction. The degree of the shear thickening increased with the oil concentration.     

Alumina-, niobia-, and niobia/alumina-supported NiMoS catalysts: Surface properties and activities in the hydrodesulfurization of thiophene and hydrodenitrogenation of 2,6-dimethylaniline

The activity of NiMoS catalysts supported on niobia, alumina, and niobia/alumina was compared for the thiophene hydrodesulfurization (HDS) and 2,6-dimethylaniline (2,6-DMA) hydrodenitrogenation (HDN) reactions. To evaluate the acidity of the supports and identify the nature of the sulfide sites, adsorption of 2,6-dimethylpyridine, pyridine, and CO was performed and followed by IR spectroscopy. This study has shown that with niobia as a support, the activity of NiMoS catalysts in thiophene HDS and in HDN of 2,6-DMA was no longer promoted by the synergy between Ni and Mo. The absence of synergy between molybdenum and nickel on niobia can be explained by the strong interaction of each metal with niobia at the expense of interaction with each other. Moreover, it has been shown that on a niobia/alumina support, the formation of the NiMoS phase can be directly linked to the presence of alumina not covered by niobia. However, niobia is an interesting support for the HDN of 2,6-DMA, because it favors the formation of xylene through direct ammonia elimination involving low H₂ consumption. The activity for xylene formation on niobia is linked to the electron-deficient nature of the Mo sulfide site, as demonstrated by CO adsorption followed by IR.     

Enzyme‐catalyzed hydrolysis of poly(ethylene terephthalate) cyclic trimer

Oligoesters present in poly(ethylene terephthalate) fibers are commonly extracted from the fiber during processing, such as aqueous‐based dyeing. Aqueous, insoluble oligoesters, particularly cyclic trimers that precipitate on processing machinery and on the fiber surface are difficult to remove under benign conditions. Reported is a new method for the efficient removal of cyclic trimer by enzyme‐catalyzed hydrolysis. Almost complete hydrolysis of trimer was accomplished at pH 8 and 60°C. Effects of time, agitation, surfactant, and enzyme and trimer concentrations on the efficiency of hydrolysis are reported. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2545–2552, 2003     

High styrene–rubber ionomers,an alternative to thermoplastic elastomers

High styrene rubber ionomers were prepared by sulfonating styrene–butadiene rubber of high styrene content (high styrene rubber) in 1,2‐dichloroethane using acetyl sulfate reagent, followed by neutralization of the precursor acids using methanolic zinc acetate. The ionomers were characterized using X‐ray fluorescence spectroscopy, Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (NMR), dynamic mechanical analysis (DMA), and also by the evaluation of mechanical properties. The FTIR studies of the ionomer reveal that the sulfonate groups are attached to the benzene ring. The NMR spectra give credence to this observation. Results of DMA show an ionic transition (T_i) in addition to glass–rubber transition (T_g). Incorporation of ionic groups results in improved mechanical properties as well as retention of properties after three cycles of processing. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2294–2300, 2002     

Rheology of oil in water emulsions with added solids

The effect of added solids on the rheology of oil in water emulsions was investigated. The range of the oil concentration, solids free basis, was (0-70%) and the solids volume fraction was (0-0.16). The solids mean diameter was 45 μm and it was about four times larger than the oil droplets. In the absence of added solids, non-Newtonian behaviour was observed for oil concentrations above 40%. The added solids increased the emulsion viscosity in a manner similar to the addition of solids to a homogeneous fluid. The rheological data of all the emulsion-solids mixtures investigated were correlated as relative viscosity versus solids volume fraction, where the relative viscosity is defined as the ratio of the emulsion-solids mixture viscosity to the solids-free emulsion viscosity. In the case of non-Newtonian systems, the emulsion-solids mixture viscosity and the solids-free emulsion viscosity were calculated at the same shear stress. The Barnea and Mizrahi viscosity correlation was found to fit the data well.