Experimental realization of ‘universal homodyne tomography’ with a single local oscillator

We report preliminary experimental measurement of the twin-beam quantum state via optical homodyne tomography using a single local oscillator. The experiment is a realization of the recently reported ‘universal homodyne tomography’ technique. The results agree well with theoretical predictions and reveal the non-classical photon-number correlation between the signal and idler photons of the twin-beam state.     

Thermo-compression bonding of electrodes between FPCB and RPCB by using Pb-free solders

In this study, electrodes on a flexible printed circuit board (FPCB) and rigid PCB (RPCB) were bonded by a thermo-compression bonding. The surface finishes on the Cu electrodes of the FPCB and RPCB were organic-solderability-preservative and electroless Ni/immersion Au (ENIG), respectively. Pb-free Sn-3.0 Ag and Sn-3.0 Ag-0.5 Cu solders were used as interlayers. In order to determine the optimum bonding conditions, such as bonding force, time, and temperature, a 90° peel test of the FPCB-RPCB joint was conducted. The relationships between the bonding conditions and peel strength were investigated. We successfully accomplished the thermo-compression bonding of reliable FPCB-RPCB joints by using Sn-Ag and Sn-Ag-Cu interlayers. The thermo-compression bonding method is a stable and well-controlled process and can produce robust and reliable connections.     

Analysis of ethanol in soy sauce using electronic nose for halal food certification

The purpose of this study was to analyze ethanol content in soy sauce using mass spectrometry (MS) with electronic nose (e-nose) to determine if MS e-nose can replace gas chromatographic analysis for halal certification. Gas chromatography–flame ionization detector (GC-FID), the standard method of ethanol content, was used to analyze 24 different kinds of soy sauce. Ethanol was detected from 13 soy sauce samples in the concentration range of 0.0004–1.7wt%. The MS e-nose data were analyzed by discriminant function analysis (DFA). Based on an addition method, the results were more than 96.6% accurate when the ethanol concentrations were greater than 0.5%. A high correlation between the first score of the DFA plot and the ethanol concentration was observed. Thus, mass spectrometry based on e-nose is an efficient method for determining ethanol as a primary screening tool for halal certification.     

A geometric approach to animating thin surface features in smoothed particle hydrodynamics water

We propose a geometric approach to animating thin surface features of smoothed particle hydrodynamics‐based water. Explicit interparticle connections are created among smoothed particle hydrodynamics particles to approximate the geometries of thin surfaces while addressing the issue of unresolved surface areas. The deformations measured on the connections actuate the animations of the surfaces by disconnecting the stretched and bent connections. The reconstruction of thin surfaces and the accuracy of the animation are improved by adding auxiliary particles over the connections via Poisson‐disk sampling. Copyright © 2014 John Wiley & Sons, Ltd.     

Structural and Piezoelectric Properties of (Na1−xKx)NbO3 Platelets and Their Application for Piezoelectric Nanogenerator

(Na_1?xK_x)NbO₃ (NKN) platelets synthesized at 600°C for 12 h have an Amm2 orthorhombic structure. However, the structure of NKN platelets synthesized at 500°C is a mixture of R3m rhombohedral and Amm2 orthorhombic structures. The formation of a rhombohedral structure is attributed to the presence of OH^? and H₂O defects in the NKN platelets. The piezoelectric strain constant (d₃₃) of NKN platelets synthesized at 600°C for 12 h is 100 pmV^?1, whereas that of NKN platelets synthesized at 500°C is lesser (50 pmV^?1) due to the presence of these defects. Piezoelectric nanogenerators (PNGs) are fabricated using composites consisting of NKN platelets and polydimethylsiloxane. A large output voltage of 25 V and output current of 2.7 μA were obtained for the PNG with NKN platelets synthesized at 600°C for 6 h. This PNG shows a high output electrical energy of 3.0 μW at an external load of 5.1 MΩ.     

Development of a new automatic fault diagnosis system for fine pattern transmission lines

International Journal of Control, Automation and Systems - This paper presents a new automatic fault diagnosis and detection system for fine pattern interconnects. It is verified by performance of...     

Comparison of the antioxidant activities of roasted and explosive puffed coffees

We investigated the explosive process effect on antioxidant activities of coffee bean. The total polyphenol contents of powdered extract of explosive puffing coffee bean at 0.75 MPa (PEP 7.5) and powdered extract of explosive puffing coffee bean at 0.9 MPa (PEP 9.0) were at a significantly higher than that of the powdered extract of roasting coffee bean (PER) (P < 0.05). PEP 7.5 showed the highest levels of 3‐CQA (86.23 μg mg^?1), 4‐CQA (43.71 μg mg^?1), and 5‐CQA (31.66 μg mg^?1), and PEP 9.0 had also similar levels of chlorogenic acids, with 3‐CQA (77.99 μg mg^?1), 4‐CQA (43.71 μg mg^?1), and 5‐CQA (30.32 μg mg^?1). PEP 7.5 and PEP 9.0 showed relatively higher antioxidant capacities in DPPH, ABTS, taurine, FRAP, and β‐carotene/linoleic acid assays. PEPs partly recovered the HepG2 cell damage induced by t‐BOOH. These results suggest that puffed coffee has beneficial health effects, and could be used for the development of novel processed coffee products.     

Flow-induced voltage generation over monolayer graphene in the presence of herringbone grooves

While flow-induced voltage over a graphene layer has been reported, its origin remains unclear. In our previous study, we suggested different mechanisms for different experimental configurations: phonon dragging effect for the parallel alignment and an enhanced out-of-plane phonon mode for the perpendicular alignment (Appl. Phys. Lett. 102:063116, 2011). In order to further examine the origin of flow-induced voltage, we introduced a transverse flow component by integrating staggered herringbone grooves in the microchannel. We found that the flow-induced voltage decreased significantly in the presence of herringbone grooves in both parallel and perpendicular alignments. These results support our previous interpretation.