Human exposure to air contaminants in sports environments

The aim of this review was to investigate human exposure to relevant indoor air contaminants, predictors affecting the levels, and the means to reduce the harmful exposure in indoor sports facilities. Our study revealed that the contaminants of primary concern are the following: particulate matter in indoor climbing, golf, and horse riding facilities; carbon dioxide and particulate matter in fitness centers, gymnasiums, and sports halls; Staphylococci on gymnasium surfaces; nitrogen dioxide and carbon monoxide in ice hockey arenas; carbon monoxide, nitrogen oxide(s), and particulate matter in motor sports arenas; and disinfection by-products in indoor chlorinated swimming pools. Means to reduce human exposure to indoor contaminants include the following: adequate mechanical ventilation with filters, suitable cleaning practices, a limited number of occupants in fitness centers and gymnasiums, the use of electric resurfacers instead of the engine powered resurfacers in ice hockey arenas, carefully regulated chlorine and temperature levels in indoor swimming pools, properly ventilated pools, and good personal hygiene. Because of the large number of susceptible people in these facilities, as well as all active people having an increased respiratory rate and airflow velocity, strict air quality requirements in indoor sports facilities should be maintained.     

Catalytic Conversion of Hexanol to 2-Butyl-octanol Through the Guerbet Reaction

Activity of heterogeneous catalysts for synthesis of Guerbet alcohols from hexanol was evaluated. Commercial synthetic hydrotalcite (HT) was used in the aldol condensation reaction, which is a part of the Guerbet reaction network. HTs were calcined at different temperatures in order to modify their basicity and additionally, NaOH was applied in some experiments as a homogeneous base. The homogeneous base proved to be more efficient in aldol condensation experiments, while HT also performed in an acceptable way. Bi-functional metal containing HTs were synthesized by wet impregnation and co-precipitation methods employing different active metals. The materials were characterized with a number of methods, including CO₂-TPD, pyridine-FTIR, nitrogen physisorption, transmission electron microscopy, SEM–EDX and XRD. Copper containing catalysts produced hexyl-hexanoate with a very high selectivity, while Ni-containing counterparts exhibited the highest selectivity towards the Guerbet alcohol. The co-precipitated catalysts were more active in the current study than the ones produced by wet-impregnation. Nevertheless, synthesis of Guerbet alcohols from hexanol with a one-pot method proved to be challenging, with the best yield of the Guerbet product in 24 h being 5%. This is proposed to be largely due to thermodynamic limitations, which was confirmed by calculations of thermodynamics.     

The importance of geographical distance to different types of R&D collaboration in the pharmaceutical industry

ABSTRACT

Innovation within companies is generated by a combination of different types of knowledge from external and geographically dispersed sources. Although the geographical dimension of collaboration has previously been investigated, studies have not distinguished between different types of knowledge involved in collaboration. This article analyses how the number of collaborations between pharmaceutical multinational companies (MNCs) and external organizations is affected by geographical distance, distinguishing between four knowledge types: basic science, clinical science, core knowledge, and exploration knowledge. We use co-publications as a proxy for collaborations. Our results show that collaborations in basic science and core knowledge areas are more negatively affected by geographical distance than collaborations within clinical science and exploration knowledge areas. This suggests that the importance of geographic proximity depends on the type of knowledge that is being transferred in R&D collaborations. Our results have implications for companies´ collaboration strategies and their choices for the R&D sites´ location.     

Emetic toxin-producing strains of Bacillus cereus show distinct characteristics within the Bacillus cereus group

One hundred representative strains of Bacillus cereus were selected from a total collection of 372 B. cereus strains using two typing methods (RAPD and FT-IR) to investigate if emetic toxin-producing hazardous B. cereus strains possess characteristic growth and heat resistance profiles. The strains were classified into three groups: emetic toxin (cereulide)-producing strains (n=17), strains connected to diarrheal foodborne outbreaks (n=40) and food-environment strains (n=43), these latter not producing the emetic toxin. Our study revealed a shift in growth limits towards higher temperatures for the emetic strains, regardless of their origin. None of the emetic toxin-producing strains were able to grow below 10 degrees Celsius. In contrast, 11% (9 food-environment strains) out of the 83 non-emetic toxin-producing strains were able to grow at 4 degrees Celsius and 49% at 7 degrees Celsius (28 diarrheal and 13 food-environment strains). non-emetic toxin-producing strains. All emetic toxin-producing strains were able to grow at 48 degrees Celsius, but only 39% (16 diarrheal and 16 food-environment strains) of the non-emetic toxin-producing strains grew at this temperature. Spores from the emetic toxin-producing strains showed, on average, a higher heat resistance at 90 degrees Celsius and a lower germination, particularly at 7 degrees Celsius, than spores from the other strains. No difference between the three groups in their growth kinetics at 24 degrees Celsius, 37 degrees Celsius, and pH 5.0, 7.0, and 8.0 was observed. Our survey shows that emetic toxin-producing strains of B. cereus have distinct characteristics, which could have important implication for the risk assessment of the emetic type of B. cereus caused food poisoning. For instance, emetic strains still represent a special risk in heat-processed foods or preheated foods that are kept warm (in restaurants and cafeterias), but should not pose a risk in refrigerated foods.     

Determination of 234U/238U ratio: comparison of multi-collector ICPMS and ICP-QMS for water, hair and nails samples, and comparison with alpha-spectrometry for water samples

The (234)U/(238)U ratio in water, hair and nails samples was determined by multi-collector inductively coupled plasma mass spectrometry (MC-ICPMS) and inductively coupled plasma quadrupole mass spectrometry (ICP-QMS) and by alpha-spectrometry for the water samples only. A correlation of 0.99 was found between the two ICPMS methods and of 0.98 with alpha-spectrometry. The range of activity ratios was between 0.9 and 2.6 according to the MC-ICPMS measurements. The reproducibility of both ICPMS techniques was better than 4% for water samples containing 1 mug l(-1) of uranium and a (234)U/(238)U atom ratio of 54.9 x 10(-6). Sample preparation for the ICPMS consisted of dilution of water samples containing >10 microg l(-1) of uranium and measurement time was approximately 1 min, while alpha-spectrometry involved pre-concentration and separation of the uranium and counting times of 1,000 min.     

The properties of biomimetically processed calcium phosphate on bioactive ceramics and their response on bone cells

This study looks for grounds to alter the chemical composition (phosphate, calcium, silica and carbonate), dissolution properties, structure and nanotopography of the biomimetically processed surfaces on bioactive ceramics to optimize their shown ability to influence bone cell behaviour and production of new bone. In the bone environment desirable characteristic of these materials is their ability to be remodeled by natural osteoclastic resorption. Different silica and carbonate containing calcium phosphate layers were prepared on bioactive glasses 9 (S53P4) and 1-98 (S53P2) and sol-gel processed pure silica SiO₂ in C- and R-SBF (conventional and revised simulated body fluid) for varying periods of time. It was shown that in R-SBF the CaP layer formed faster compared to C-SBF. The CaP layer in the R-SBF contained more carbonate (CO₃ ²⁻) compared to that formed with the same immersion time in C-SBF. The CaP so formed in R-SBF with faster precipitation is more amorphous than the bonelike HCA formed in C-SBF. The results indicate that the most suitable surface for both osteoblasts and osteoclasts was found to be an amorphous CaP having mesoporous nanotopography and proper dissolution rate of calcium and silica.     

Configurable parallel memory architecture for multimedia computers

This paper presents a novel parallel memory architecture for multimedia computers. Applying a configurable or programmable addressing circuitry capable of parallel memory accesses, the memory management of multimedia applications can be enhanced. Necessary computer architecture changes to virtual address representation, paging, virtual memory, address computation circuitry and data permutation are discussed. These changes allow the memory to be partitioned for different access functions. In addition, the same memory area can be accessed by multiple access patterns. Therefore, a general-purpose computing system that is capable of exploiting the repeating memory access patterns in its applications can be built. Performance of the configurable parallel memory architecture (CPMA) is analyzed in the case of a selection of algorithms from a video encoder. These motion estimation algorithms and zigzag scanning benefit from the multiple memory access functions, which is apparent from the comparisons to the traditional sequential memory accesses.     

The concept of fictitious loading

The concept of fictitious external loading being in exact equilibrium with the internal stresses in a structure is introduced. It is employed in conjunction with the principle of virtual work in an effort to examine certain details of the finite element displacement method in an alternative way.     

Cancer in the offspring of fathers in hydrocarbon-related occupations

Thirteen patients with bulbar urethral strictures were treated by excision of the stricture and end to end anastomosis of the urethra with uniformly good results.     

Assessment of occupational exposure to uranium by indirect methods needs information on natural background variations

Urine monitoring is the preferred method to determine exposure to soluble compounds of uranium in workplaces. The interpretation of uranium contents in workers bioassay samples requires knowledge on uranium excretion and its dependence on intake by diet. Exceptionally high concentrations of natural uranium in private drinking water sources have been measured in the granite areas of Southern Finland. Consequently, high concentrations of natural uranium have been observed in the urine and hair samples of people using water from their own drilled wells. Natural uranium content in urine and hair samples of family members, who use uranium-rich household water, have been analyzed by using ICP-MS. The uranium concentrations both in urine and hair samples of the study subjects were significantly higher than the world-wide average values. In addition, gammaspectrometric methods have been tested for determining uranium in hair samples. This method can be used only for samples with highly elevated uranium concentrations.