Area- and time-specific marginal capacity costs of electricity distribution

Marginal costs of electricity vary by time and location. In the past, researchers attributed the variations to factors related to electricity generation and transmission. These authors, however, have not analyzed possible variations in marginal distribution capacity costs (MDCC). The objectives of this paper are:

1. (i) to show that large MDCC variations are due to the dispersion in distribution capital expenditures by time and space,

2. (ii) to propose a method for quantifying the area- and time-specific MDCC in the presence of lumpy investments, and

3. (iii) to compare our MDCC estimates to those commonly used in the electric utility industry.

Our proposed method and its results were adopted by the California Public Utilities Commission (CPUC) in 1992 for Pacific Gas and Electric Company (PG&E), the largest privately owned electric utility in the U.S.     

顶封封隔管柱的研制与应用

中原油田近年来注水压力不断升高，井况恶化严重，为此开发了顶封封隔管柱，主要阐述了管柱工况受力特点、结构、工作原理及现场使用效果。经现场较大面积的应用证明，各项性能、技术指标达到了现场要求。     

水平井岩屑录井的影响因素及对策

由于岩屑沉积床的形成、井壁坍塌和井眼不规则、岩屑多次破碎、钻时资料失真及混油钻井液污染等因素影响，水平井的岩屑比普通直井更混杂、更细碎，代表性也更差，岩屑中的油气显示真假难辨。通过加密实测迟到时间，参考钻井参数及DC指数可以对岩屑进行较准确地分层、描述，采用多次荧光滴照、四氯化碳浸泡、气测资料分析等方法，能够有效地区分真假油气显示。     

Evaluation of Monkman-Grant parameters for type 316LN and modified 9Cr-Mo stainless steels

The Monkman-Grant (M-G) and its modified parameters were evaluated for type 316LN and modified 9Cr-Mo stainless steels prepared with minor element variations. Several sets of creep data for the two alloy systems were obtained by constant-load creep tests in 550-650°C temperature range. The M-G parameters,m, m’,C, andC’ were proposed and discussed for the two alloy systems. Them value of the M-G relation was 0.90 in type 316LN steel and 0.84 in modified 9Cr-Mo steel. Them’, value of the modified relation was 0.94 in type 316LN steel and 0.89 in 9Cr-Mo steel. Although creep fracture modes and creep properties between type 316LN and modified 9Cr-Mo steels showed a basic difference, the M-G and its modified relations demonstrated linearity quite well. Them’ of modified relation almost overlapped regardless of the creep testing conditions and chemical variations in the two alloy systems, and the parameterm’ was closer to unity than that of the M-G relation.     

提高自蔓延高温合成陶瓷内衬钢管性能的研究

在概括了自蔓延高温合成陶瓷内衬钢管的制备原理基础上，从降低陶瓷层孔隙率，减少陶瓷层裂纹和提高陶瓷层结合强度等方面，论述了提高自蔓延高温合成陶瓷内衬钢管性能的措施，对自蔓延高温合成陶瓷内衬钢管的应用现状及展望进行了评述。     

复合乳化沥青的粘附性试验方法研究

鉴于目前使用的阳离子乳化沥青粘附性试验方法难以有效评价复合乳化沥青粘附性，通过试验研究并综合考虑乳化沥青施工和路用实际情况，提出了乳化沥青水煮法试验方法和采用该方法检验复合乳化沥青粘附性时的评定标准。     

NO emission characteristics in counterflow diffusion flame of blended fuel of H2/CO2/Ar

Flame structure and NO emission characteristics in counterflow diffusion flame of blended fuel of H₂/CO₂/Ar have been numerically simulated with detailed chemistry. The combination of H₂, CO₂ and Ar as fuel is selected to clearly display the contribution of hydrocarbon products to flame structure and NO emission characteristics due to the breakdown of CO₂. A radiative heat loss term is involved to correctly describe the flame dynamics especially at low strain rates. The detailed chemistry adopts the reaction mechanism of GRI 2.11, which consists of 49 species and 279 elementary reactions. All mechanisms including thermal, NO₂, N₂O and Fenimore are taken into account to separately evaluate the effects of CO₂ addition on NO emission characteristics. The increase of added CO₂ quantity causes flame temperature to fall since at high strain rates a diluent effect is prevailing and at low strain rates the breakdown of CO₂ produces relatively populous hydrocarbon products and thus the existence of hydrocarbon products inhibits chain branching. It is also found that the contribution of NO production by N₂O and NO₂ mechanisms are negligible and that thermal mechanism is concentrated on only the reaction zone. As strain rate and CO₂ quantity increase, NO production is remarkably augmented. Copyright © 2002 John Wiley & Sons, Ltd.     

A compact LTCC-based Ku-band transmitter module

Presents design, implementation, and measurement of a three-dimensional (3-D)-deployed RF front-end system-on-package (SOP) in a standard multi-layer low temperature co-fired ceramic (LTCC) technology. A compact 14 GHz GaAs MESFET-based transmitter module integrated with an embedded bandpass filter was built on LTCC 951AT tapes. The up-converter MMIC integrated with a voltage controlled oscillator (VCO) exhibits a measured up-conversion gain of 15 dB and an IIP3 of 15 dBm, while the power amplifier (PA) MMIC shows a measured gain of 31 dB and a 1-dB compression output power of 26 dBm at 14 GHz. Both MMICs were integrated on a compact LTCC module where an embedded front-end band pass filter (BPF) with a measured insertion loss of 3 dB at 14.25 GHz was integrated. The transmitter module is compact in size (400 /spl times/ 310 /spl times/ 35.2 mil/sup 3/), however it demonstrated an overall up-conversion gain of 41 dB, and available data rate of 32 Mbps with adjacent channel power ratio (ACPR) of 42 dB. These results suggest the feasibility of building highly SOP integrated RF front ends for microwave and millimeter wave applications.     

中国陶瓷业如何与国际市场对接——访中国建筑卫生陶瓷协会秘书长缪斌

我国是陶瓷生产大国,近几年发展速度很快.2001年,我国的建筑陶瓷产量约20亿平方米,卫生瓷5000万件以上,全年全行业出口额超过2亿美元,创历史最好水平.加入WTO给我国陶瓷行业带来了很多机遇和挑战,但我们究竟与意大利、西班牙等陶瓷强国差距在哪里呢?记者最近走访了中国建筑陶瓷协会秘书长缪斌先生.恰逢秘书长刚从欧洲考察回来,便聊起这次欧洲之行……     

Accumulation of thiobarbituric acid‐reactive substances in cured pork sausages treated with propolis extracts

Propolis collected by bees has many components that possess antifungal, anticancer and antioxidant properties. Cured ground pork meat was treated separately with 0.4% w/w ethanol‐extracted propolis (EEP 0.4%), 0.6% w/w water‐extracted propolis (WEP 0.6%), 0.8% w/w dried residue of ethanol‐extracted propolis (DREEP 0.8%) and 0.1% w/w potassium sorbate (PS 0.1%) and made into sausages. Thiobarbituric acid‐reactive substances (TBARS) were measured in the sausages to assess the effects of storage at 5, 10 and 20 °C after 0, 2 and 4 weeks. After 4 weeks of storage at 5 °C the sausages treated with EEP 0.4%, DREEP 0.8%, WEP 0.6% and PS 0.1% yielded TBARS values which were 50, 59, 35 and 91% respectively of the control value. There was an increase of 0.33 mg MDA kg^?1, the lowest of all treatments, in TBARS for the 0.4% w/w EEP‐treated sausages. The curing process will control microbiological spoilage, as will potassium sorbate. © 2002 Society of Chemical Industry