负压条件下氧化法的煤气脱硫工艺

针对HPF法及PDS法煤气脱硫流程温度梯度存在的问题,中冶焦耐工程技术有限公司在济南信赢煤焦化有限公司的焦化项目中,首次采用了负压条件下以氨为碱源的氧化法煤气脱硫工艺。通过对脱硫生产装置的测试表明,控制脱硫液中的氨含量在6.0～9.0g/L、悬浮硫小于4g/L、催化剂浓度为15～20ppm、盐类总量不超过300g/L、溶液pH值8.0～9.0、液气比为35～38L/m3等指标后,脱硫塔后煤气含H2S小于300mg/m3,脱硫效率大于95%。     

UV涂料在户外的应用

本文简述了辐射固化技术的发展历史，回顾了我国辐射固化涂料的发展状况，介绍了户外用UV涂料的特点、制备及国外最新进展。     

Cycling of lithium/metal oxide cells using composite electrolytes containing fumed silicas

The effect on cycle capacity is reported of cathode material (metal oxide, carbon, and current collector) in lithium/metal oxide cells cycled with fumed silica-based composite electrolytes. Three types of electrolytes are compared: filler-free electrolyte consisting of methyl-terminated poly(ethylene glycol) oligomer (PEGdm, M_w=250)+lithium bis(trifluromethylsufonyl)imide (LiTFSI) (Li:O=1:20), and two composite systems of the above baseline liquid electrolyte containing 10-wt% A200 (hydrophilic fumed silica) or R805 (hydrophobic fumed silica with octyl surface group). The composite electrolytes are solid-like gels. Three cathode active materials (LiCoO₂, V₆O₁₃, and Li_xMnO₂), four conducting carbons (graphite Timrex® SFG 15, SFG 44, carbon black Vulcan XC72R, and Ketjenblack EC-600JD), and three current collector materials (Al, Ni, and carbon fiber) were studied. Cells with composite electrolytes show higher capacity, reduced capacity fade, and less cell polarization than those with filler-free electrolyte. Among the three active materials studied, V₆O₁₃ cathodes deliver the highest capacity and Li_xMnO₂ cathodes render the best capacity retention. Discharge capacity of Li/LiCoO₂ cells is affected greatly by cathode carbon type, and the capacity decreases in the order of Ketjenblack>SFG 15>SFG 44>Vulcan. Current collector material also plays a significant role in cell cycling performance. Lithium/vanadium oxide (V₆O₁₃) cells deliver increased capacity using Ni foil and carbon fiber current collectors in comparison to an Al foil current collector.     

甲苯歧化与C9芳烃烷基转移反应动力学模型和模拟分析

A new kinetic model for commercial unit of toluene disproportionation and C9-armatiocs transalkylation is developed based on the reported reaction scheme.A time based catalyst deactivation function taking weight hourly space velocity（WHSV）into account is incorporated into the model,which reasonably accounts for the loss in activity because of coke deposition on the surface of catalyst during long-term operation.The kinetic parameters are benchmarked with several sets of balanced plant data and estimated by the differential variable metric optimiza- tion method.Sets of plant data at different operating conditions are applied to make sure validation of the model and the results show a good agreement between the model predictions and plant observations.The simulation analysis of key variables such as temperature and WHSV affecting process performance is discussed in detail,giving the guidance to select suitable operating conditions.     

液相催化调聚合成卤代烃的催化剂研究进展

综述了卤代烷与烯烃调聚合成卤代烃的催化剂体系，包括铜催化剂、铁催化剂、镍催化剂和复合金属催化剂等无载体型催化剂和负载型催化剂。     

Side-Surface Structure of a Commercial β-Silicon Carbide Whisker

The side surfaces of a commercial β-SiC whisker were analyzed by calculating the surface energy and observing the microstructure of the whiskers. The results indicated that the side surfaces displayed a type of zigzag structure and were composed of {111}, {110}, and {100} crystal planes.     

GC/MC法分析哈尔滨风干肠香辛料中的挥发性成分

为了获取关于香辛料在哈尔滨风干肠中的应用资料，利用静态顶空进样法从哈尔滨市售两种知名品牌的风干肠香辛料（FX）中收集到挥发性香气成分，连接GC／MC装置进行分析，分别测得FX1中有20种化合物，FX2中有22种化合物，这些化合物均以烯烃类、醇类、醚类、醛类、酮类、酸类、脂类及芳香类有机化学物质为主，而此类化学物质也均属于食品化学中所介绍的香辛料的主要成分的范畴，本实验利用峰面积归一化法通过G170LBA化学工作站数据处理系统得出各化学成分在每个样品中的相对百分比。     

PIV Investigations of Flow Patterns in the Entrance Configuration of Plate-fin Heat Exchanger

Flow characteristics in the entrance of plate-fin heat exchanger have been investigated by means of particle image velocimetry （PIV）. The flow field was measured using the two-frame cross-correlation technique. Streamline and velocity contour graphs at different cross-sections were obtained in the experiment. The experimental results indicate that flow maldistribution in the conventional header is very serious, while the improved header configuration with punched baffle can effectively improve the uniformity. The flow maldistribution parameter in plate-fin heat exchanger has been reduced from 1.21 to 0.21, and the ratio of the maximum velocity to the minimum is reduced from 23.2 to 1.8 by installing the punched baffle. The results suggest room for the optimum design of plate-fin heat exchanger.     

移动平台闸站监控系统的设计与实现

针对水利闸站监控系统对于应急信息和措施的需求, 提出了移动平台水利闸站监控系统。首先分析了系统的 整体框架结构, 然后实现了一套移动客户端软件完成水利闸站监控的功能。将手机客户端与云平台服务器相连, 通 过网络通信方式获取闸站现场传感器信息, 远程采集和存储数据, 客户端移动终端系统具有前端处理与计算能力通 过移动无线网络访问服务器, 实现了对多控制节点的远程监控。结果表明该系统能及时有效地获取闸站水利信息 并进行调度, 提高了水利信息化水平。     

改性淀粉与丙烯酸接枝共聚物的合成及应用性能

研究经过热处理的改性淀粉与丙烯酸的接枝共聚反应。接枝共聚产物在 790cm-1、85 0cm-1(物理改性淀粉的特征吸收峰 )和 172 0cm-1(聚丙烯酸的特征吸收峰 )处的红外光谱验证了接枝共聚反应的发生。探讨了引发剂过硫酸铵浓度、丙烯酸浓度、反应温度和反应时间等因素对接枝率和接枝效率的影响。当 ρ(淀粉 ) =70 g/L、t =6 0℃、反应时间为 3h、c〔(NH4) 2 S2 O8〕 =3 0× 10 -3 mol/L、c(丙烯酸 ) =0 4 2mol/L时 ,合成胶粘剂的初粘力为 10 0 % ,吸水率为 15 0 14 % ,吸油率为 2 0 6 % ,其压制的纸板冲击强度为 3 2 5kN/m ,拉伸强度为 3 75MPa ,与纯淀粉粘接剂相比较 ,所压制纸板的应用性能得到较大的改善。