单片机仿真器EMV—51的工作原理及其使用中问题的解决方法

介绍了单片机仿真器的工作原理，提出了在实际使用中所遇到的一些问题，并给出了解决这些问题的办法。     

Study of Desorption and Adsorption During Grain Aeration

One requirement in designing and operating and operating system is to minimize the moisture change in stored grain. Moisture transfer during the aeration process is generally believed to be caused by the partial pressure difference between water in grain and water in air (P₃-P₄). A mathematical model was developed for rough rice, which predicts the partial pressure difference under various grain and ambient conditions. Observations of moisture change over 10 aeration tests confirmed the good correlation between sorption phenomena and partial pressure differences. Studies indicated that air relative humidity, air temperature, grain temperature and grain moisture are significant factors influencing the partial pressure differences and, thus, affecting     

珠江三角洲土坝和堤围震害初步预测

本项预测采用概率方法,即首先根据广东省水利部门提出的55座土坝和59个重点的座标(见附图),进行概率地震危险性分析,给出它们在一定预测年限T(取50年和100年)的地震烈度Ⅰ的超越概率;其次根据近年我国发生的几次强震时处于不同烈度区内的土坝和堤防的震害资料,形成表示土坝和土堤地震易损性的震害概率矩阵;然后,根据上述两方面结果用概率公式评价各土坝和堤围点在预测年限内各震害等级的超越概率,并取10％超越概率为标准,估计震害等级。结果表明,珠江三角洲土工构筑物的地震危害性南部高于北部。     

综合应用地震属性、测井数据反演储层参数

本文研究了样点地震属性的特征提取，利用BP神经网络建立测井声波时差和地震属性的非线性映射关系。采用距离加权平均对研究区所有井的反演结果进行外推。为了提高分辨率和计算结果的准确性，详细分析、研究了适合于地震信号分解和重构的小波，以及测井声波时差和地震波阻抗与层界面的关系。最后，对反演的声波时差资料进行界面影响校正，进而计算出较符合实际情况的孔隙率参数。经已知井和新钻井验证，计算结果和实际情况相一致，效果令人满意。     

固体火箭发动机喷管用烧蚀隔热材料研究进展

介绍了固体火箭发动机喷管用烧蚀隔热材料的研究进展，喷管受热分析，指出了先进复合材料的发展趋势，提出碳／酚醛复合材料在制造低成本的发动机喷管中仍有重大使用价值。     

有机发光器件平板显示及彩色象元实现方案

有机发光器件（OLED）具有固体平板化的优点，用OLED制做平板显示器不仅重量轻和功耗低，而且能实现低成本的彩色大屏幕显示。本文从有机发光器件的原理出发，阐述了有机发光器件平板显示器的三色象元的一些实现方案和目前的发展状况，并对它们的基本结构及技术特点进行了比较。     

Cellular mechanisms for developmental toxicity of chlorpyrifos: targeting the adenylyl cyclase signaling cascade

Developmental neurotoxicity caused by chlorpyrifos exposure is generally thought to target cholinesterase but chlorpyrifos may also act on cellular intermediates, such as adenylyl cyclase, that serve global functions in the coordination of cell development. In the current study, neonatal rats were exposed to apparently subtoxic doses of chlorpyrifos (no weight loss, no mortality) either on Postnatal Days 1-4 or on Postnatal Days 11-14, and the effects on components of the adenylyl cyclase cascade were evaluated in brain regions that are enriched (forebrain) or sparse (cerebellum) in cholinergic innervation, as well as in a nonneural tissue (heart). In all three, chlorpyrifos evoked deficits in multiple components of the adenylyl cyclase cascade: expression and activity of adenylyl cyclase itself, functioning of G-proteins that link neurotransmitter and hormone receptors to cyclase activity, and expression of neurotransmitter receptors that act through this cascade. Disruption of signaling function was not restricted to transduction of cholinergic signals but rather extended to adrenergic signals as well. In most cases, the adverse effects were not evident during the immediate period of chlorpyrifos administration, but appeared after a delay of several days. These results suggest that chlorpyrifos can affect cell development by altering the activity and reactivity of the adenylyl cyclase signaling cascade, a major control point for trophic regulation of cell differentiation. The effects are not restricted to cholinergic targets, nor even to the central nervous system. Hence, disruption of cell development by chlorpyrifos is likely to be more widespread than previously thought.     

水解酸化-A/O2-SMBR工艺处理高浓度含氮合成制药废水

采用水解酸化-A/02-SMBR工艺处理高浓度含氮合成制药废水,设计处理水量700 m3/d,实际处理水量400 m3/d.在实际进水CODCr约6 000 mg/L,NH3-N约200 mg/L,有机氮150 mg/L的情况下,处理后CODCr＜200 mg/L,NH3-N＜10 mg/L.介绍了组合工艺的特点、具体设计参数,并对系统调试运行情况和经济效益进行了探讨分析.     

The feature-based posterior crown design in a dental CAD/CAM system

This paper presents a newly developed CAD approach for a quick and accurate design of a dental posterior prosthesis. The approach arises from the basic idea that every human tooth has its own specific features. Based upon the features of the standard posterior tooth, the initial data containing the defined feature points are firstly acquired from the scanned points of the standard tooth. The standard prosthetic profile is thereby formulated using the bicubic Nurbs surface fitting technique. This profile has the two functions of possessing the same features with the patient’s missing posterior tooth, and the adjustability with the feature points and the defined B-spline profile feature curves. For the purpose of the adjustment of the established model, the global and occlusal feature curves are proposed considering the individual patient’s original information. According to these curves, the corresponding standard prosthetic profile is locally adjusted to meet the fit of the global size and occlusal surface. Finally, a close and continuous profile of a posterior crown is generated. Using this design, a posterior prosthesis is successfully manufactured in the computer-aided machining process.     

基于视觉效果的雷达目标动态回波序列特征提取方法

特征提取在雷达目标识别中具有重要地位,提取有效、可靠的目标特征,是建立目标识别系统的基础和关键。在常规低分辨雷达目标识别系统中,难以根据电磁散射理论进行有效建模。本文在观察和分析大量实测数据的基础上,根据雷达操作员进行目标判性的思维过程和描述方法,以雷达目标动态回波序列的视觉效果为切入点,建立了一整套雷达目标特征提取方法。在多个雷达目标识别项目中的实际应用,证明了该方法的有效性、稳健性和可推广性。