基于PCI总线的扫描电镜图像采集系统

图像采集系统是扫描电镜的一个重要组成部分，用于控制扫描电镜的扫描电源，视频图像采集，数字化与显示，电镜主控计算机与底层微机板的通讯和电镜照相，本图像采集系统基于PCI总线接口设计，硬件主要设计采用FPGA技术，实现了数字电路的模块化设计，集成度和灵活性高，目前，电镜图像卡已达到所要求的设计水平。     

-100kV／10MW全固态刚管调制器

介绍了一种 -10 0kV/10MW全固态刚管调制器的方案和工作原理。简要概述了其各个组成部分、调制器的高电位隔离、IGBT驱动电路、辅助供电以及保护电路的设计与原理。与采用电子管为开关的调制器的主要性能指标进行了对比 ,讨论了这种类型调制器在雷达发射机中应用的前景     

陆东凹陷油气藏烃类组成非均质性及其意义

陆东凹陷原油和油砂抽提物中烃类的宏观组成存在着明显的非均质性。在高孔隙度(>15%)储层单元中,饱和烃的含量高,占总组成的含量均大于40%,而极性化合物则相对较低,一般不足40%;相反,在低孔隙度(<15%)储层单元中,饱和烃的含量明显降低,而极性化合物则显著增加。此外,陆东凹陷原油和油砂抽提物中烃类成熟度亦存在着非均质性:在高孔隙度储层中,原油和油砂烃类的成熟度参数高,而在低孔隙度储层中原油和油砂烃类的成熟度参数低。根据原油和油砂抽提物中烃类的宏观组成特征和成熟度参数的变化规律,提出了陆东凹陷油气聚集模式。     

化学复合镀层激光处理研究

研究了激光处理对Ni-P -SiC化学复合镀层的影响。借助于扫描电镜、能谱仪、X射线衍射、显微硬度计等设备对激光处理后复合镀层的表面形貌、组织结构及性能进行了综合分析。结果表明 ,对复合镀层进行激光处理可以获得与炉内加热同样的镀层硬度 ,且当激光功率 4 0 0W ,扫描速度 1.5m /min时 ,镀层硬度高于炉内加热的硬度     

动态矩阵控制在浆料浓度控制系统中的应用

针对PTA生产中浆料配制过程这一有纯滞后、大时间常数的非线性系统，进行系统的动态机理分析，与工作点附近的线性化，在此基础上设计DMC-PID串级加前馈控制方案。目前该系统在扬子石化化工厂PTA装置上已成功投运。     

Electro-organic synthesis without supporting electrolyte: Possibilities of solid polymer electrolyte technology

The application of ion exchange membranes as solid polymer electrolytes (SPE) in fuel cells is state-of-the-art. This technology needs no supporting electrolyte; consequently it can be applied for electro-organic syntheses in order to save process steps. In this case the process is not predetermined to a maximized energy efficiency so that the selection of the cell design, of the electrode materials and of the operating conditions can be focused on a high selectivity of the electrode reactions. The electro-osmotic stream, which is caused by the solvation shells of the ions during their migration through the membrane, and hence is a typical property of SPE technology, has a significant effect on the electrode reactions. It generates enhanced mass transfer at the electrodes, which is beneficial for reaction selectivity. It can be influenced by the choice of, and possibly by the preparation of, the membrane. An additional remarkable advantage of SPE technology is the exceptional long durability of oxide coated electrodes. By combination of several process engineering methods stable operation of SPE cells has been realized, even for examples of non-aqueous reaction systems. Experiments up to 6000 h duration and in cells of up to 250 cm² membrane area show the potential for industrial application.     

珠光体球化的分形研究

珠光体球化反映到金相上，是一种不规则图像的变化，并且具有分形的特征，可望用分形几何的方法来进行描述。以Cr-Mo钢的珠光体球化为例，用分形维数来描述珠光体球化程度；用小岛法对15CrMo钢的珠光体球化图谱进行了测量。实验表明，珠光体球化从1级到6级，其相应的分形维数范围为1.3156-1.9282。从电厂运行了10^5h的15CrMo钢管上取样，实测了该试样的珠光体球化等级，结果表明，以分形维数表示的球化程度与按图谱评定的球化等级完全吻合。     

Leben, Arbeit, Kommunikation — Harmonie im Dreiklang

An enterprise is not just a tall shiny building or a collection of facilities. Rather, it is the sum of individuals collectively engaged in a common pursuit. From an information and communications perspective, this realization changes everything. By looking at the enterprise as a boundary-less collection of individuals who sometimes work in an office, sometimes at home, and sometimes on the road, we need new communications concepts designed to work with and enhance our complex home and work lives.     

土石过水围堰过水期最不利工况及其流量确定

本文系统分析了影响土石过水围堰溢流工况的主要因素，提出衡量最不利工况的指标和确定员不利流量的方法，为土石过水围堰堰体下游护坡结构及消能防冲设施设计提供了理论依据。通过理论计算结果与模型试验现场观测资料数据对比分析，说明提出的过水期最不利流量判别方法是符合实际情况的。