An improved technique for exfoliating and dispersing nanoclay particles into polymer matrices using supercritical carbon dioxide

An environmentally benign process, which uses supercritical carbon dioxide (sc-CO₂) as a processing aid, is developed in this work to help exfoliate and disperse nanoclay into the polymer matrices. The process relies on rapid expansion of the clay followed by direct injection into the extruder where the mixture is dispersed into the polymer melt. Results from the mechanical properties, rheological studies, and X-ray diffraction (XRD) show that this method represents a significant improvement relative to direct melt blending in single or twin-screw extruders or other methods using sc-CO₂. The greatest mechanical property response was a result of directly injecting pre-mixed sc-CO₂ and nanoclay into the polypropylene melt during extrusion. It was observed that for concentrations as high as 6.6 wt% (limited only by present process capabilities), XRD peaks were eliminated, suggesting a high degree of exfoliation. Mechanical properties such as modulus increased by as much as 54%. The terminal region of the dynamic mechanical spectrum was similar to that of the base polymer, contrary to what is frequently reported in the literature.     

Authentification and identification — Taking the user into account

Username/Password is still the prevailing authentication mechanism for internet based services — but it is not secure! We show how new authentication and identification mechanisms focused on usability and security can change this.     

Graft polymerization of vinyl acetate onto silica

The free‐radical graft polymerization of vinyl acetate onto nonporous silica particles was studied experimentally. The grafting procedure consisted of surface activation with vinyltrimethoxysilane, followed by free‐radical graft polymerization of vinyl acetate in ethyl acetate with 2,2′‐azobis(2,4‐dimethylpentanenitrile) initiator. Initial monomer concentration was varied from 10 to 40% by volume and the reaction was spanned from 50 to 70°C. The resulting grafted polymer, which was stable over a wide range of pH levels, consisted of polymer chains that are terminally and covalently bonded to the silica substrate. The experimental polymerization rate order, with respect to monomer concentration, ranged from 1.61 to 2.00, consistent with the kinetic order for the high polymerization regime. The corresponding rate order for polymer grafting varied from 1.24 to 1.43. The polymer graft yield increased with both initial monomer concentration and reaction temperature, and the polymer‐grafted surface became more hydrophobic with increasing polymer graft yield. The present study suggests that a denser grafted polymer phase of shorter chains was created upon increasing temperature. On the other hand, both polymer chain length and polymer graft density increased with initial monomer concentration. Atomic force microscopy–determined topology of the polymer‐grafted surface revealed a distribution of surface clusters and surface elevations consistent with the expected broad molecular‐weight distribution for free‐radical polymerization. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 300–310, 2003     

Restoration of depressed prostanoid-induced ileal contraction in spontaneously hypertensive rats by dietary fish oil

We have reported that dietary fish oil (FO) rich in n-3 PUFA modulates gut contractility. It was further demonstrated that the gut of spontaneously hypertensive rats (SHR) has a depressed contractility response to prostaglandins (PG) compared with normotensive Wistar-Kyoto (WKY) rats. We investigated whether feeding diets supplemented with n-3 PUFA increased gut contractility and restored the depressed prostanoid response in SHR gut. Thirteen-week-old SHR were fed diets containing fat at 5 g/100 g as coconut oil (CO), lard, canola oil containing 10% (w/w) n-3 FA as alpha-linolenic acid (1 8:3n-3), or FO (as HiDHA, 22:6n-3) for 12 wk. A control WKY group was fed 5 g/100 g CO in the diet. As confirmed, the SHR CO group had a significantly lower gut response to PGE2 and PGF2alpha compared with the WKY CO group. Feeding FO increased the maximal contraction response to acetylcholine in the ileum compared with all diets and in the colon compared with lard, and restored the depressed response to PGE2 and PGF2alpha in the ileum but not the colon of SHR. FO feeding also led to a significant increase in gut total phospholipid n-3 PUFA as DHA (22:6n-3) with lower n-6 PUFA as arachidonic acid (20:4n-6). Canola feeding led to a small increase in ileal EPA (20:5n-3) and DHA and in colonic DHA without affecting contractility. However, there was no change in ileal membrane muscarinic binding properties due to FO feeding. This report confirms that dietary FO increases muscarinic- and eicosanoid receptor-induced contractility in ileum and that the depressed prostanoid response in SHR ileum, but not colon, is restored by tissue incorporation of DHA as the active nutrient.     

Efficacy of iron fortification compared to iron supplementation among Vietnamese schoolchildren

Background  

Parents of six children are facing a trial on charges of aggravated manslaughter in the care a 5 1/2 month old infant who died suddenly and neglect of their four older children for causing them to be malnourished by feeding them all an exclusively raw foods vegan diet. Both parents declined plea bargains and plan to defend themselves in court.     

Kinetics of Thermal Dehydroxylation and Carbonation of Magnesium Hydroxide

The kinetics of simultaneous dehydroxylation and carbonation of precipitated Mg(OH)₂ were studied using isothermal and nonisothermal thermogravimetric analyses. Specimens were analyzed using X-ray diffraction, transmission electron microscopy, and through measurements of the volume of carbon dioxide evolved in a subsequent reaction with hydrochloric acid. From 275° to 475°C, the kinetics of isothermal dehydroxylation in helium were best fit to a contracting-sphere model, yielding an activation energy of 146 kJ/mol, which was greater than values reported in the literature for isothermal dehydroxylation under vacuum (53–126 kJ/mol). The carbonation kinetics were complicated by the fact that dehydroxylation occurred simultaneously. The overall kinetics also could be fit to a contracting-sphere model, yielding a net activation energy of 304 kJ/mol. The most rapid carbonation kinetics occurred near 375°C. At this temperature, Mg(OH)₂ underwent rapid dehydroxylation and subsequent phase transformation, whereas thermodynamics favored the formation of carbonate. During carbonation, MgCO₃ precipitated on the surface of disrupted Mg(OH)₂ crystals acting as a kinetic barrier to both the outward diffusion of H₂O and the inward diffusion of CO₂.     

Hierarchical three dimensional curved beam element based on p-version

This paper presents a three node curved three dimensional beam element for linear static analysis where the element displacement approximation in the axial () and transverse directions ( and ) can be of arbitrary polynomial orders p , p and p . This is accomplished by, first constructing one dimensional hierarchical approximation functions and the corresponding nodal variable operators in , and directions using Lagrange interpolating polynomials and then taking the products (also called tensor product) of these hierarchical one dimensional approximation functions and the corresponding nodal variable operators. The resulting approximation functions and the corresponding nodal variables for the three dimensional beam element were hierarchical. The formulation guarantees C ⁰ continuity. The element properties are established using the principle of virtual work. In formulating the properties of the element all six components of the stress and strain tensor are ratained. The geometry of the beam element is defined by the coordinates of the nodes located at the axis of the beam and node point vectors representing the nodal cross-sections. The results obtained from the present formulation are compared with analytical solutions (when available) and the h-models using isoparametric three dimensional solid elements. The formulation is equally effective for very slender as well as deep beams since no assumptions are made regarding such conditions during the formulation.     

Compression based clustering technique for enhancing accuracy in web scale videos

Multimedia Tools and Applications - Detection and clustering of commercial advertisements plays an important role in multimedia indexing also in the creation of personalized user content. In...     

Application of Fuzzy Moving Sliding Surface Approach for Container Cranes

International Journal of Control, Automation and Systems - In this paper, we consider the fuzzy moving sliding surface anti-sway control problem for container cranes. We first introduce the dynamic...     

Satellite-Based Water Quality Mapping from Sequential Simulation with Parameter Outlier Removal

The satellite-based regression model provides the data model that identifies water quality for inland and coastal waters. However, the satellite regression usually depends on the selection of observation, satellite data, and model type. A resampling simulation technique, such as sequential simulation using geographically weighted regression (GWR simulation), can be applied in generating multiple realizations for water quality estimation to reduce the sampling effect and consider spatial heterogeneity. Traditional models often result in considerable underestimation in extreme observations. The GWR simulation provides the best goodness of fit and spatial varying relationship between observed water quality and remote sensing considering parameter outlier and noise removal for parameter stability. This simulation model can increase the sampling diversity from various observations and reduce the neighboring effects of observations using outlier and noise removal. The model that handles spatial uncertainty and heterogeneity is a novel tool for inferring the characteristics of water quality from a series of sample subsets.