On the Consistency of the Normalized Eight-Point Algorithm

A recently proposed argument to explain the improved performance of the eight-point algorithm that results from using normalized data (Chojnacki, W., et al. in IEEE Trans. Pattern Anal. Mach. Intell. 25(9):1172–1177, 2003) relies upon adoption of a certain model for statistical data distribution. Under this model, the cost function that underlies the algorithm operating on the normalized data is statistically more advantageous than the cost function that underpins the algorithm using unnormalized data. Here we extend this explanation by introducing a more refined, structured model for data distribution. Under the extended model, the normalized eight-point algorithm turns out to be approximately consistent in a statistical sense. The proposed extension provides a link between the existing statistical rationalization of the normalized eight-point algorithm and the approach of Mühlich and Mester for enhancing total least squares estimation methods via equilibration. The paper forms part of a wider effort to rationalize and interrelate foundational methods in vision parameter estimation.     

Etching behavior of CVD zinc selenide in inorganic acid solutions

Chemical interaction between polished surfaces of polycrystalline zinc selenide and inorganic acid solutions of various concentrations has been studied.     

Electromagnetic wave reflection from Fe/Cr nanostructures

The reflection of electromagnetic waves in the millimeter wave band from Fe/Cr nanostructures has been studied. It is established that the giant magnetoresistance (GMR) in the nanostructure leads to an increase in the reflection and a decrease in the transmission of microwaves, while the magnetic resonance leads to a decrease in both the reflection and transmission coefficients.     

High-temperature oxidation of intermetallics formed by group IV transition metals with chromium

We have studied the oxidation resistance of chromium intermetallics: TiCr₂, HfCr₂, and ZrCr₂, in the temperature interval 873–1473 K with isothermal holding of the specimens for up to 20 h. We have shown that the intermetallics TiCr₂ and HfCr₂ are oxidized 2–3 times more slowly than pure titanium and hafnium, but more than 1–2 orders of magnitude faster than chromium at T≤1273 K and 4–6 times faster at 1473 K. In this temperature interval, the intermetallic ZrCr₂ is rapidly oxidized at an increasing rate as the heating temperature rises. The scaling resistance of intermetallics of Group IV d metals with chromium is determined by formation of scales in which the major role is played by the oxides TiO₂, HfO₂, and ZrO₂, with weak protective properties.     

New encapsulation development for fine pitch IC devices

The continuous reduction of chip size driven by the market demand has a significant impact on circuit design and assembly process of IC packages. Shrinking chip size and increasing I/O counts require finer bond pad pitch and bond pad size for circuitry layout. As a result, serious wire deflection during transfer molding process could make adjacent wires short, and this issue becomes more critical as a smaller wire diameter has to be applied for the finer pitch wire bonded IC devices.This paper presents a new encapsulation process development for 50 μm fine pitch plastic ball grid array package. Since reduced wire diameter decreases the bending strength of bonded wires significantly, wire deflection during molding process becomes quite serious and critical. Experiments on conventional transfer molding were conducted to evaluate wire span threshold with 23.0 μm diameter gold wire. The results show that the wire span threshold is about 4.1 mm, which is much shorter than the wire span threshold of over 5.0 mm for wire with 25.4 μm diameter. Finite element analysis shows there is a significant difference in the wire deflection between 23.0 μm gold wire and 25.4 μm gold wire diameter under the same action of mold flow. A novel encapsulation method is introduced using non-sweep solution. The wire span could be extended to over 5.0 mm with wire sweep less than 1%. Reliability tests conducted showed that all the units passed 1000 temperature cycles (−55 to 125 °C) with JEDEC moisture sensitivity level 2a (60 °C/60% relative humidity for 120 h) and 3 times reflow (peak temperature at 220–225 °C). It is believed that this solution could efficiently overcome the risk of wire short issues and improve the yield of ultra fine pitch wire bonds in high-volume production.     

Energy management for commercial servers

Servers: high-end, multiprocessor systems running commercial workloads, have typically included extensive cooling systems and resided in custom-built rooms for high-power delivery. Recently, as transistor density and demand for computing resources have rapidly increased, even these high-end systems face energy-use constraints. Commercial-server energy management now focuses on conserving power in the memory and microprocessor subsystems. Because their workloads are typically structured as multiple application programs, system-wide approaches are more applicable to multiprocessor environments in commercial servers than techniques that primarily apply to single-application environments, such as those based on compiler optimizations.     

Three-dimensional structure of the cloud of a carbon pellet evaporated in plasma of Wendelstein 7-AS stellarator

Experiments performed on a Wendelstein 7-AS stellarator revealed asymmetry of the cloud of an ablating carbon pellet. The cloud is elongated in the direction of large radius toward stronger fields, that is, opposite to the direction expected due to the toroidal drift. In order to study the effect in more detail, the three-dimensional structure of the cloud was analyzed by computer tomography. The results confirmed asymmetry of the cloud. This asymmetry is related to a drift flow existing in the plasma and directed along large radius toward stronger fields. The drift velocity is numerically estimated at ～300 m/s.     

Customer service providers' attitudes relating to customer service and customer satisfaction in the customer-server exchange.

The authors proposed and tested a model describing the relationship between customer service providers' perceptions and attitudes toward their service-related duties and their customers' perceptions of satisfaction with their service experiences. Results indicated that the perception of having standards for service delivery in an organization is strongly related to line-level employees' perceptions of support from coworkers and supervisors. Perceived support from coworker, was significantly related to service providers' customer orientation, whereas perceived support from supervisors showed a weaker relationship to a customer orientation. Ultimately, service providers' customer orientation was strongly related to customers' satisfaction with service. Finally, a set of post hoc analyses indicated that coworker and supervisory support explained a greater proportion of incremental variance in the model than did perceived organizational support alone. (PsycINFO Database Record (c) 2010 APA, all rights reserved)