Rate acceleration of Diels–Alder reactions utilizing a fluorous micellar system in water

A fluorous micellar system in water has been created to produce a large interfacial area between these media that retains substrates, effectively facilitating intermolecular Diels–Alder reactions due to repulsion effects from both media. Because LiFOS functioned not only as a surfactant but also as a supporting electrolyte, an electrochemical approach could be introduced to evaluate the rate acceleration effects. The measurement of the particle size distribution of the fluorous micelles clearly supported these evaluations.     

Return Link Systems for Wireless Mobile Camera Using 42 GHz-Band with Frequency and Space Diversity Techniques

In this paper, return link systems for wireless mobile camera using 42 GHz-band in multipath fading environments are proposed. The return link systems for wireless mobile camera require wireless transmission with high reliability as same as the conventional wired camera systems. The proposed return link systems achieve transmission with high reliability by taking into consideration frequency and space diversity techniques. The proposed systems can be classified as 3 three types of return link systems according to diversity techniques： FD （frequency diversity） systems, SD （space diversity） systems and FD＋SD system （frequency and space diversity）. Computer simulations are carried out in order to confirm the effectiveness of the proposed return link systems. It is confirmed that the proposed three types of return link systems have an advantage about BER performances and effectively exploit frequency and space resources.     

Influence of Particle Size on the Distributions of Liposomes to Atherosclerotic Lesions in Mice

ABSTRACT

In order to confirm the efficacy of liposomes as a drug carrier for atherosclerotic therapy, the influence of particle size on the distribution of liposomes to atherosclerotic lesions in mice was investigated. In brief, liposomes of three different particle sizes (500, 200, and 70 nm) were prepared, and the uptake of liposomes by the macrophages and foam cells in vitro and the biodistributions of liposomes administered intravenously to atherogenic mice in vivo were examined. The uptake by the macrophages and foam cells increased with the increase in particle size. Although the elimination rate from the blood circulation and the hepatic and splenic distribution increased with the increase in particle size in atherogenic mice, the aortic distribution was independent of the particle size. The aortic distribution of 200 nm liposomes was the highest in comparison with the other sizes. Surprisingly, the aortic distribution of liposomes in vivo did not correspond with the uptake by macrophages and foam cells in vitro. These results suggest that there is an optimal size for the distribution of liposomes to atherosclerotic lesions.     

Determination of optical purity and absolute configuration of natural 12‐hydroxystearic acid by the 1H NMR anisotropy method

The enantiopure of (R)‐(?) MαNPA was allowed to react with racemic 18‐(tert‐butyldimethylsilyloxy)‐5‐octadecayne‐7‐ol which was derived from dodecane‐1,12‐diol, yielding diastereomeric esters mixture. These racemic esters were easily separated by HPLC on silica‐gel. The absolute configurations of the first‐eluted diastereomeric esters from the separated esters were determined using ¹H NMR anisotropy method. Analysis on ¹H NMR spectra and HPLC elution time of the synthesized esters and those of MαNP ester derived from natural methyl‐12‐hydroxystealate showed that the absolute configuration of natural 12‐hydroxystearic acid was R form, and the enantiomeric excess was over 99%.     

Stability and accuracy of power‐series method for one‐dimensional heat conduction with non‐uniform grid systems

The power‐series method, a finite analytic approach to heat transfer and fluid flow problems that is based on power‐series expansion, was applied to a one‐dimensional heat‐conduction problem to evaluate its stability and accuracy. Application to a specific heat‐conduction problem with non‐uniform grid systems showed that it had stability within the ranges 10⁻⁵<Δt,Δx_E, and Δx_W,a<10⁵, and 10⁻⁵<β<10⁵. Comparison of its solutions with those by the fully implicit and Stefanovic–Stephan methods showed that this method yielded more accurate and robust solutions. © 2005 Wiley Periodicals, Inc. Heat Trans Asian Res, 34(7): 470–480, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20085     

Performances of metal fluoride added carbon anodes with pre-electrolysis for electrolytic synthesis of NF3

Metal fluoride added carbon anodes treated by pre-electrolysis were investigated for electrolytic production of nitrogen trifluoride (NF₃) in molten NH₄F·KF·4HF at 100 °C. The conditions for pre-electrolysis were first optimized using a graphite sheet anode as a model anode. The formation of fluorine-graphite intercalation compounds (fluorine-GICs) with semi-covalent C–F bonds, (C_xF)_n, on the MgF₂ and CaF₂ added carbon anode surface was accelerated by pre-electrolysis at potentials less than 4.0 V. Critical current densities (CCD) on the MgF₂ added carbon anodes pre-electrolyzed under various conditions were determined, and the highest CCD was 290 mA cm⁻² obtained for that pre-electrolyzed at 3.5 V for 500 C cm⁻². This anode was successfully used in the electrolysis at 100 mA cm⁻² for 290 h and the maximum NF₃ current efficiency was 55%. From these results, it was concluded that the metal fluoride added carbon anode treated by pre-electrolysis has a high potential for electrolytic production of NF₃ at higher current density.     

Creep deformation properties of creep strength enhanced ferritic steels

Creep deformation properties of creep strength enhanced ferritic steels were investigated. Good linear relationships between creep strain vs. time and creep rate vs. time were observed within a transient stage in a double logarithmic plot. It was appropriately expressed by a power law rather than exponential law, logarithmic law and Blackburn’s equation. With decrease in stress, a magnitude of creep strain at the onset of accelerating creep stage decreased from about 2% in the short-term to less than 1% in the long-term. Life fraction of the time to specific strain of 1% creep strain and 1% total strain, to time to rupture tended to increase with decrease in stress. A time to 1% total strain, that is a parameter for design of high temperature components, was observed in the transient creep stage in the short-term regime, however, it shifted to the accelerating creep stage in the long-term regime. Difference in stress dependence of the minimum creep rate was observed in the high- and low-stress regimes with a boundary condition of 50% of 0.2% offset yield stress. Stress dependence of the minimum creep rate in the high stress regime was equivalent to a strain rate dependence of flow stress observed in tensile test, and a magnitude of stress exponent, n, in the high stress regime decreased with increase in temperature from 20 at 550°C to 10 at 700°C. On the other hand, n value in the low stress regime was about 5, and creep deformation in the low stress regime was considered to be controlled by dislocation climb.     

Real-time system for measuring gaze direction and facial features: towards automatic discrimination of lies using diverse nonverbal information

Interactive and autonomous agents might be common in everyday life in the future; we expect that such agents will have the ability to communicate with people naturally. For natural communication, the agents should speculate about the intentions of the people they interact with. To enable agents to speculate about intentions like deception, we focused on unconscious expressions when people tell a lie. However, there is no system that can meet the necessary conditions for measuring nonverbal information in natural communication. Therefore, we made a real-time system for measuring gaze direction and facial features. We conducted experiments for discriminating lies by using the system in a situation similar to actual communication. As a result, we found that we could discriminate lies by using diverse nonverbal information in the same way people did.     

Extraction,selection and ranking of Field Association (FA) Terms from domain-specific corpora for building a comprehensive FA terms dictionary

Field Association (FA) Terms—words or phrases that serve to identify document fields are effective in document classification, similar file retrieval and passage retrieval. But the problem lies in the lack of an effective method to extract and select relevant FA Terms to build a comprehensive dictionary of FA Terms. This paper presents a new method to extract, select and rank FA Terms from domain-specific corpora using part-of-speech (POS) pattern rules, corpora comparison and modified tf-idf weighting. Experimental evaluation on 21 fields using 306 MB of domain-specific corpora obtained from English Wikipedia dumps selected up to 2,517 FA Terms (single and compound) per field at precision and recall of 74–97 and 65–98. This is better than the traditional methods. The FA Terms dictionary constructed using this method achieved an average accuracy of 97.6% in identifying the fields of 10,077 test documents collected from Wikipedia, Reuters RCV1 corpus and 20 Newsgroup data set.