Social desirability effects on computerized and paper-and-pencil questionnaires

The objectives of the present study were to determine the impact of computer administration of questionnaires on impression management (IM) and self-deceptive enhancement (SDE) and on the disclosure of sensitive information such as alcohol use and risky sex. College students (N = 301) completed several questionnaires in either a computer-administered or paper-and-pencil condition. Respondents who completed the survey on the computer scored significantly higher on SDE than those completing the survey on paper. No differences were found for IM. Respondents in the computer condition also reported a higher level of alcohol consumption and riskier sexual behaviors than those in the paper-and-pencil condition. It is possible that computer administration of surveys creates a social situation that produces a sense of disinhibition in respondents, and this sense of disinhibition may lead to greater reports of risky behaviors.     

Control of SF6 discharge gap switch by XeCl excimer laser

Experimental studies have been carried out on triggering characteristics of the SF₆ discharge gap switch by use of XeCl excimer laser (wavelength = 308 nm). First, laser irradiation characteristics are studied on a pure SF₆ in the pressure range of p = 160 ～ 3,800 torr. Using a lens of f (focal length) = 133 mm, the laser is irradiated into the gas, where the energy absorption is studied. If the laser is injected into the gas with the energy above a certain threshold for the breakdown, the rate of energy absorption is found to be ～ 17 percent of the incident energy at p > 760 torr. Injecting the laser into the SF₆-filled gap switch (gap length = 7 mm, p = 760 torr), we have studied the triggering characteristics. Excellent triggering characteristics were obtained; delay time for the discharge ～ 20 ns, and the jitter ～ 260 ps when the gap voltage is operated at 99 percent of the self-breakdown voltage. In addition, the triggering characteristics are studied by changing the focusing point axially. It is found that both the delay time and the jitter decrease when the focusing point tends to approach the high-voltage electrodes.     

Development of Mo(Si,Al)<Subscript>2</Subscript>-base oxidation-resistant coating on Nb-base structural materials

Mo(Si,Al)₂-base oxidation-resistant coatings for Nb-base structural materials have been studied. The coating is composed of a Mo(Si,Al)₂-base Al reservoir and Al₂O₃ interlayer to suppress interface reactions between the Al reservoir and the substrate. To develop a suitable Al-reservoir material, some Mo(Si_0.6,Al_0.4)₂-HfB₂ composites were prepared. Their oxidation resistance and coefficients of thermal expansion were investigated, in addition to their chemical reactivity with the Nb substrate at high temperatures. As a result, Mo(Si_0.6,Al_0.4)₂-20 vol pct HfB₂ was selected as one of the satisfactory Al reservoirs. The introduction of a stable Al₂O₃ interlayer was attempted using a novel powder metallurgical process to overlay the Nb substrates with the Al reservoir, where the Nb substrates were subjected to a slight surface oxidation prior to the coating process. The Nb specimens, which are thoroughly coated with the Al reservoir and Al₂O₃ interlayer, can be successfully fabricated by this method. The coated Nb specimens are not damaged at all after prolonged exposure in flowing Ar-20 pct O₂ at 1673 K for 120 hours. Furthermore, the Al₂O₃ interlayer is very effective and no reactions occur at the interface. Thus, this Mo(Si,Al)₂-base oxidation-resistant coating is applicable to Nb. The utility of the coating system is also confirmed for a Nb_SS/Nb₅Si₃ composite. This article is based on a presentation made in the symposium entitled “Beyond Nickel-Base Superalloys,” which took place March 14–18, 2004, at the TMS Spring meeting in Charlotte, NC, under the auspices of the SMD-Corrosion and Environmental Effects Committee, the SMD-High Temperature Alloys Committee, the SMD-Mechanical Behavior of Materials Committee, and the SMD-Refractory Metals Committee.     

Reactive carbon black having isocyanate or acyl azide group

Summary Introduction of isocyanate (NCO) group onto carbon black surface was achieved by the treatment of carbon black with toluene-2,4-diisocyanate. In addition, carbon black having acyl azide (CON₃) group, a precursor of NCO group, was prepared by the reaction of COCl or COOCOOC₂H₅ group on carbon black with NaN₃. The CON₃ group on carbon black was relatively stable at below 20°C but readily decomposed to NCO group by heating (Curtius rearrangement). By the reation of NCO group on carbon black with hydroxyl group of polymers, such as polypropylene glycol, polyethylene glycol, and polyvinyl alcohol, these polymers were found to be grafted onto carbon black.     

Characterization of electrode/electrolyte interface for lithium batteries using in situ synchrotron X-ray reflectometry—A new experimental technique for LiCoO2 model electrode

A new experimental technique was developed for detecting structure changes at electrode/electrolyte interface of lithium cell using X-ray reflectometry and two-dimensional model electrodes with a restricted lattice-plane. The electrodes were constructed with an epitaxial film of LiCoO₂ synthesized by pulsed laser deposition method. The orientation of the epitaxial film depends on the substrate plane; the 2D layer of LiCoO₂ is parallel to the SrTiO₃ (1 1 1) substrate (_(0 0 3)LiCoO₂//_(1 1 1)SrTiO₃)$({(003)}_{\text{LiCo}{\text{O}}_2}//{(111)}_{\text{SrTi}{\text{O}}_3})$, while the 2D layer is perpendicular to the SrTiO₃ (1 1 0) substrate (_(1 1 0)LiCoO₂//_(1 1 0)SrTiO₃)$({(110)}_{\text{LiCo}{\text{O}}_2}//{(110)}_{\text{SrTi}{\text{O}}_3})$. The anisotropic properties were confirmed by electrochemical measurements. Ex situ X-ray reflectivity measurements indicated that the impurity layer existed on the as-grown LiCoO₂ was dissolved and a new SEI layer with lower density was formed after soaking into the electrolyte. In situ X-ray reflectivity measurements indicated that the surface roughness of the intercalation (1 1 0) plane increased with applying voltages, while no significant changes in surface morphology were observed for the intercalation non-active (0 0 3) plane during the pristine stage of the charge–discharge process.     

Display Method for Online Bookstore Emulating Real Bookstore by WebGL

Thanks to the spread of the Internet, opportunities to use online bookstores have been increasing in recent years. However, it is difficult for the typical customer to intuitively grasp which book sells well or which book is recommended by the shop. We have therefore developed a display system for virtual bookstores in which an image of books arranged in a bookshelf or stacked on a table is reproduced by using WebGL. Since the amount of book stock that is managed by the server side needs to be changed as orders come in from clients, we introduce a server side technology using a hypertext preprocessor(PHP).