First paralytic shellfish poison (PSP) infestation of bivalves due to toxic dinoflagellate Alexandrium tamiyavanichii, in the southeast coasts of the Seto Inland Sea, Japan

The mussel Mytilus edulis and the cultured ark shell Anadara broughtonii in the southeast coasts of the Seto Inland Sea were contaminated with paralytic shellfish poison (PSP) following the appearance of the dinoflagellate Alexandrium tamiyavanichii in early December 1999. A. tamiyavanichii plankton collected around the Straits of Naruto on December 3, 1999 showed PSP toxicity, of which 83 mol% was accounted for by GTX2, GTX3 and GTX4. Its specific toxicity was 112.5 fmol/cell, and one MU was equivalent to 7,200 cells. Toxicity values at the beginning of toxification were 4.7 MU/g for the ark shell and 7.3 MU/g for the mussel. In the former, the value remained at almost 4 MU/g, resulting in prohibition of marketing for about two months. In the latter, it sharply decreased to less than 4 MU/g. These bivalves collected during the toxification period were dissected into five tissues, mantle, adductor muscle, hepatopancreas, gills and "others", and submitted to high-performance liquid chromatography (HPLC). The cultured ark shell accumulated GTX2, GTX3 and STX as major components and GTX1, GTX4, GTX5, neoSTX, dcSTX and PX1-3 (C1-C3) as minor ones. The amount of GTX3 decreased with time, while STX tended to increase. At the early stage of PSP toxification, toxins were accumulated in the gills and "others", most of which were quickly detoxified. On the other hand, PSP of the toxified mussel consisted of GTX4 as a main component, and GTX1, GTX2, GTX3, GTX5, STX and PX1-2 (C1-C2) as minor ones. Its toxin composition pattern was similar to that of the ingested causative plankton. Its total toxin decreased soon after disappearance of the dinoflagellate. During the decrease of toxicity, PSP tended to be retained in the hepatopancreas, resulting in accumulation of 50 mol% of total toxin.     

Isotope 18O/16O ratio measurements of water vapor by use of the 950-nm wavelength region with cavity ring-down and photoacoustic spectroscopic techniques

Two optical methods, cavity ring-down spectroscopy and photoacoustic spectroscopy, are applied to the measurement of the isotope ratio 18O/16O in water-vapor samples with a Nd3+:YAG pumped-dye laser. The combination band of (2v1 + v3) in the 960-nm region of water molecules is investigated for two standard water samples, the Vienna Standard Mean Ocean Water and the Standard Light Antarctic Precipitation. The results demonstrate that the two methods have the potential of compact systems for in-situ measurements of H2O isotope ratio in the environment.     

A flow method with photocatalytic oxidation of dissolved organic matter using a solid-phase (TiO2) reactor followed by amperometric detection of consumed oxygen

A photocatalytic sensor for the determination of chemical oxygen demand (COD) using titanium dioxide, based on the use of a pair of oxygen electrodes and flow injection analysis, is described. The measuring principle is based on the direct determination of the oxygen concentration change resulting from photocataltic oxidation of organic compounds. One of the two oxygen electrodes, the reference oxygen electrode, was utilized to measure the reference signal responding only to oxygen present in the injected samples. Oxygen consumption due to the TiO2-catalyzed photochemical oxidation of organic compounds in samples was monitored with the working oxygen electrode. The COD value of this sensor was calculated as the difference of the currents at reference and working oxygen electrodes, respectively. The operation characteristics of the sensor are demonstrated using artificially treated wastewater as a substrate. The sensor was also applied to the determination of COD in real water samples from dam reservoirs (n = 20) all over Japan. The results were in good agreement with those from the conventional COD methods (i.e., permanganate and dichromate methods).     

Sperm phospholipase Czeta from humans and cynomolgus monkeys triggers Ca2+ oscillations,activation and development of mouse oocytes

Fusion with a fertilizing spermatozoon induces the mammalian oocyte to undergo a remarkable series of oscillations in cytosolic Ca(2+), leading to oocyte activation and development of the embryo. The exact molecular mechanism for generating Ca(2+) oscillations has not been established. A sperm-specific zeta isoform of phospholipase C (PLCzeta) has been identified in mice. Mouse PLCzeta triggers Ca(2+) oscillations in mouse oocytes and exhibits properties synonymous with the 'sperm factor' that has been proposed to diffuse into the oocyte after gamete fusion. The present study isolated the PLCzeta homologue from human and cynomolgus monkey testes. Comparison with mouse and monkey PLCzeta protein sequences indicates a shorter X-Y linker region in human PLCzeta and predicts a distinctly different isoelectric point. Microinjection of complementary RNA for both human and cynomolgus monkey PLCzeta elicits Ca(2+) oscillations in mouse oocytes equivalent to those seen during fertilization in mice. Moreover, human PLCzeta elicits mouse egg activation and early embryonic development up to the blastocyst stage, and exhibits greater potency than PLCzeta from monkeys and mice. These results are consistent with the proposal that sperm PLCzeta is the molecular trigger for egg activation during fertilization and that the role and activity of PLCzeta is highly conserved across mammalian species.     

Model-less visual servoing using modified simplex optimization

This article describes a robot positioning task with respect to a static target by visual servoing. The vision system is uncalibrated, and the kinematic model of the robot may be totally unknown. The displacements of the robot at joint level are generated in real time in order to minimize the objective function. The objective function includes the quadratic error between the current and the desired target images. A simplex method is used to minimize the objective function, and a Newton-like method is also used near convergence. We successfully validated this method with simulations under the graphic library OpenGL. This work was presented in part at the 10th International Symposium on Artificial Life and Robotics, Oita, Japan, February 4–6, 2005     

Mechanism for change in leakage current waveform on a wet silicone rubber surface-a study using a dynamic 3-D model

This paper describes the results of experiments and simulations made to examine the waveform of leakage current flowing through the surface of HTV (high temperature vulcanized) silicone rubber specimen exposed to clean fog. Water droplets were placed on the surface of specimen energized with AC voltage and investigations of the surface state were done by a high-speed video camera in a wet condition produced by sprayed clean fog. Simultaneously, according to the experimental condition, a dynamic 3-D model was built to calculate the electric field and current density distribution on the specimen surface by a finite element software. A conducting water layer is formed due to the deformation of droplets and the development of dry band arcing. This caused large distortion and nonlinearly which increased the odd harmonic components in the leakage current waveform. This is in good agreement with the simulating calculation. The information from the leakage current frequency characteristic was extracted and correlated with the insulation surface condition. It can be considered as a diagnostic index for electrical characteristics and insulation state of polymer insulators in the wet condition.     

Development of a novel emitting vinyl polymer and its application in organic electroluminescent devices

Abstract— A novel emitting vinyl polymer, poly[4‐(7‐{4‐[N,N‐bis(9,9‐dimethylfluoren‐2‐yl)amino]phenyl}‐2,1,3‐benzothiadiazol‐4‐yl)phenylethylene] (PVFABT), was designed and synthesized. The new vinyl polymer was found to form smooth amorphous films with a high glass‐transition temperature of 199°C. The polymer possesses bipolar character with both electron‐donating and accepting properties. It undergoes reversible anodic oxidation and cathodic reduction to give stable cation and anion radicals. It exhibits intense orange fluorescence in solution and as film. A multilayer organic electroluminescent device using PVFABT as an emitting material emitted orange light, exhibiting high performance.     

Efficient transformation of Mesorhizobium huakuii subsp. rengei and Rhizobium species

The transformation of Mesorhizobium huakuii subsp. rengei B3 with either pBBR122 or pKT230 was carried out. We determined the optimal conditions required for transformation by electroporation and obtained up to 10(5) CFU/microg pBBR122. Plasmids prepared from strain B3 yielded higher transformation efficiency than those from various dam or dcm mutant strains of Escherichia coli. This result suggests that a high transformation efficiency is not related to the methylation of plasmid DNA in E. coli. Using the optimal conditions for electroporation, we performed transformation of several species of Rhizobium, Mesorhizobium and Sinorhizobium. All tested strains of these species were transformed with pBBR122. Strains of M. huakuii and R. phaseoli AHU1133 were transformed at high efficiency, whereas transformation efficiencies of Rhizobium sp. NGR234 and S. meliloti strains were less than 2 x 10(3) CFU/microg plasmid DNA.     

Image contrast of ultra HVEM and future ultra HREM

Review of the measurements and interpretation of energy dependence of extinction distance and transmissive power of electrons, which have appeared in the electron microscope images of crystals at the voltages ranging from 50 to 3000 kV, is presented. Applications of two beam dynamical theory of electron diffraction considering absorption effect of electrons made clear the importance of relativistic effect of the mass of electron to the variation of extinction distance and transmissive power at higher voltage and noted that they are proportional to (v/c) and (v/c)2 respectively, where v and c are the velocity of illuminating electrons and light. With elevating accelerating voltage of illuminating electrons, it was noted that many diffracted waves are excited and thus, for understanding of the image contrast and the improvement of transmissive power of electrons, many beam dynamical theory considering absorption of electron waves has to be applied. Detailed analysis of the excitation and absorption of component Bloch waves was carried out and flux (electron current) flow of Bloch waves and total waves was deduced. Improvements of image contrast and visibility of the imperfection in crystalline materials both in thin and thick regions of ultra-high voltages were realized by using the multi-beam imaging (MBI) method. In MBI of very thick crystals, it was noted that most of the inelastically scattered electrons which appeared in the background of the diffraction patterns contribute to the image contrast by the successive elastic scattering after inelastic scattering. It was noted that the improvement of maximum usable thickness at high voltage is highly dependent on the contribution of inelastically scattered electrons. The calculated flux flows of total electrons of various materials in various orientations were calculated for not only ultra-high voltages but low voltages such as 100 kV. It was suggested that the intensity distribution of such flux flow will be recorded by the ultra HREM in the near future and will become useful to identify types of atoms, such as the interface consisting of different kinds of atoms.     

Analog Circuit Design Methodology in a Low Power RISC Microprocessor

There are various kinds of analog CMOS circuits in microprocessors. IOs, clock distribution circuits including PLL, memories are the main analog circuits. The circuit techniques to achieve low power dissipation combined with high performance in newest prototype chip in the Super H RISC engines are described. A TLB delay can be decreased by using a CAM with a differential amplifier to generate the match signal. The accelerator circuit also helps to speed up the TLB circuit, enabling single-cycle operation. A fabricated 96-mm² test chip with the super H architecture using 0.35-m four metal CMOS technology is capable of 167-MHz operation at 300 Dhrystone MIPS with 2.0-W power dissipation.