A novel microneedle array for the treatment of hydrocephalus

We present a microfabricated 10 by 10 array of microneedles for the treatment of a neurological disease called communicating hydrocephalus. Together with the previously reported microvalve array, the current implantable microneedle array completes the microfabricated arachnoid granulations (MAGs) that mimic the function of normal arachnoid granulations. The microneedle array was designed to enable the fixation of the MAGs through dura mater membrane in the brain and thus provide a conduit for the flow of cerebrospinal fluid. Cone-shaped microneedles with hollow channels were fabricated using a series of microfabrication techniques: SU-8 photolithography for tapered geometry, reactive ion etching for sharpening the microneedles, 248 nm deep UV excimer laser machining for creating through-hole inside the microneedles, and metal sputtering for improved rigidity. Puncture tests were conducted using porcine dura mater and the results showed that the fabricated microneedle array is strong enough to pierce the dura mater. The in vitro biocompatibility test result showed that none of the 100 outlets of the microneedles exposed to the bloodstream were clogged significantly by blood cells. We believe that these test results demonstrate the potential use of the microneedle array as a new treatment of hydrocephalus.     

Preparation of ketoprofen‐loaded high‐molecular‐weight poly(vinyl alcohol) gels

High‐molecular‐weight atactic poly(vinyl alcohol) (a‐PVA) gels loaded with (R,S)‐2‐(3‐benzoylphenyl)propionic acid (ketoprofen) were prepared from 5, 6, 7, and 8 g/dL solutions of a‐PVA with a number‐average degree of polymerization of 4000 in an ethylene glycol/water mixture with an aging method to identify the effect of the initial polymer concentration on the swelling behavior, morphology, and thermal properties of a‐PVA gels. Then, the release behavior of ketoprofen from a‐PVA gels was investigated. As the polymer concentration decreased, the ability for network formation decreased, and the degree of swelling of the a‐PVA gels increased. In addition, the enthalpy increased with an increase in the a‐PVA concentration, but the melting temperatures of the gels prepared at different initial polymer concentrations were the same; this indicated that tighter gel networks would be formed by a higher polymer chain density. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Preparation of high‐molecular‐weight poly(vinyl alcohol) with high yield by solution polymerization of vinyl acetate in methanol using 4,4′‐azobis(4‐cyanovaleric acid)

Vinyl acetate (VAc) was solution‐polymerized at 40°C and 50°C using 4,4′‐azobis(4‐cyanovaleric acid) (ACVA) as an initiator and methanol as a solvent, and effects of polymerization temperature and initiator concentration were investigated in terms of conversion of VAc into poly (vinyl acetate) (PVAc), degree of branching (DB) for acetyl group of PVAc, and molecular weights of PVAc and resulting poly(vinyl alcohol) (PVA) obtained by saponifying with sodium hydroxide. Slower polymerization rate by adopting ACVA and lower viscosity by methanol proved to be efficient in obtaining linear high‐molecular‐weight (HMW) PVAc with high conversion and HMW PVA. PVA having maximum number–average degree of polymerization (P_n) of 4300 could be prepared by the saponification of PVAc having maximum P_n of 7900 polymerized using ACVA concentration of 2 × 10^?5 mol/mol of VAc at 40°C. Moreover, low DB of below 1 could be obtained in ACVA system, nevertheless of general polymerization temperatures of 40°C and 50°C. This suggests an easy way for producing HMW PVA with high yield by conventional solution polymerization without using special methods such as low‐temperature cooling or irradiation. © 2006 Wiley Periodicals, Inc. J Appl PolymSci 102: 4831–4834, 2006     

Thermal and thermomechanical properties of poly(ethylene oxide) networks produced with silica and organic crosslinking agents

The thermal and thermomechanical properties of two series of poly(ethylene oxide) networks (NPEOs) were investigated as a function of the chain length between crosslink sites (M_c) and the concentration of LiClO₄ (C_L) in the NPEOs. The two series of networks were produced with silica and organic crosslinking agents and, therefore, had crosslink sites of different natures: one was an inorganic silicate network (silica NPEO), and the other was an organic polar group (organic NPEO). The crosslink sites in both series of networks were commonly covalently bonded to the poly(ethylene oxide) (PEO) phase through a urethane group in the NPEOs. The glass‐transition temperatures (T_g's) of the PEO phases in the NPEOs, according to differential scanning calorimetry, increased with a decrease in M_c and were higher in the silica NPEOs than in the organic NPEOs under the same M_c conditions. The difference in T_g between the two series of networks with the same M_c values increased with decreasing M_c. These results suggested that the interaction of crosslink sites with the PEO phase was stronger in the silica NPEOs than in the organic NPEOs. The addition of LiClO₄ to the NPEOs resulted in T_g of the PEO phase in the NPEOs being elevated and increased according to the increase in C_L. The increase of T_g of the PEO phase according to the increase of C_L in the NPEOs was retarded or saturated at high values of C_L, and this indicated that the limit of solubility of the salt in the polymer was attained. The retardation or saturation of the increase of T_g was also observed in dynamic mechanical analyses. The curves of the loss factor tan δ and temperatures from the dynamic mechanical analyses for the NPEOs with high values of C_L showed shoulders or double peaks indicating the existence of the second phase in the polymer networks. In the curves of tan δ for salt‐complexed NPEOs with high values of C_L, silica NPEOs showed a shoulder of low intensity, but organic NPEOs showed a distinguished second peak becoming stronger with increasing C_L. The results of the T_g behavior and tan δ curves suggested that the salt solubility in the NPEOs was limited and that the salt solubility of PEO in the silica NPEOs was higher than that in the organic NPEOs. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 270–277, 2003     

Measurement and modeling solubility of bioactive coumarin and its derivatives in supercritical carbon dioxide

To design a supercritical fluid extraction process for the separation of bioactive substances from natural products, a quantitative knowledge of phase equilibria between target biosolutes and solvent is necessary. How-ever, mostly no such information is available in literature to date. Thus in the present study, illustratively the solubility of bioactive coumarin and its various derivatives (i.e., hydroxy-, methyl-, and methoxy-derivatives) in supercritical CO₂ were measured at 308.15–328.15 K and 10–30 MPa. Also, the pure physical properties such as normal boiling point, critical constants, acentric factor, molar volume and standard vapor pressure for coumarin and its derivatives were estimated. By these estimated information, the measured solubilities were quantitatively correlated by an approximate lattice equation of state proposed recently by the present authors.     

A quadratic spline approximation using detail multi-layer for soft shadow generation in augmented reality

Implementation of shadows is crucial to enhancement of images in AR environments. Without shadows, virtual objects would look floating over the scene resulting in unrealistic rendering of AR environments. Casting hard shadows would provide only spatial information while soft shadows help improve realism of AR environments. Several algorithms have been proposed to render realistic shadows which often incurred high computational costs. Little attention has been directed towards the balanced trade-off between shadow quality and computational costs. In this study, two approaches are proposed: Quadratic Spline Interpolation (QSI) to soften the outline of the shadow and Detail Multi-Layer (DML) technique to optimize the volume of computations for the generation of soft shadows based on real light sources. QSI estimates boarder hard shadow samples while DML involves three main phases: real light sources estimation, soft shadow production and reduction of the complexity of 3-Dimensional objects’ shadows. To be more precise, a reflective hemisphere is used to capture real light and to create an environment map. The Median Cut algorithm is implemented to locate the direction of real light sources on the environment map. Subsequently, the original hard shadows are retrieved and a sample of multilayer hard shadows is produced where each layer has its unique size and colour. These layers overlap to produce soft shadows based on the real light sources’ directions. Finally, the Level of Details (LOD) algorithm is implemented to increase the efficiency of soft shadows by decreasing the complexity of vertex transformations. The proposed technique is tested using three samples of multilayer hard shadows with varying numbers of light sources generated from the Median Cut algorithm. The experimental results show that the proposed technique successfully produces realistic soft shadows at low computational costs.     

Ce3+/Tb3+-coactived NaMgBO3 phosphors toward versatile applications in white LED,FED, and optical anti-counterfeiting

Ce³⁺/Tb³⁺ co-doped NaMgBO₃ phosphors were successfully synthesized by solid-state method. Under 381 nm excitation, the cyan emission owing to the 5d → 4f of Ce³⁺ ions and green emissions arising from the ⁵D₄ → ⁷F_J (J = 6, 5, 4, and 3) transitions of Tb³⁺ ions were seen in all the phosphors. Through theoretical analysis, one knows that the energy transfer from Ce³⁺ to Tb³⁺ ions with high efficiency of 83.74% was contributed by dipole–dipole transition. Furthermore, the internal quantum efficiency of NaMgBO₃:0.01Ce³⁺,0.03Tb³⁺ phosphor was 54.28%. Compared with that of at 303 K, the emission intensity of the developed products at 423 K still kept 73%, revealing the splendid thermal stability of the studied phosphors. Through utilizing the resultant phosphors as cyan-green components, the fabricated white-LED device exhibited an excellent correlated color temperature of 2785 K, high color-rendering index of 85.73, suitable luminance efficiency of 25.00 lm/W, and appropriate color coordinate of (0.4279, 0.3617). Aside from the superior photoluminescence, the synthesized phosphors also exhibited excellent cathode-luminescence properties which were sensitive to the current and accelerating voltage. Furthermore, the NaMgBO₃:0.01Ce³⁺,0.03Tb³⁺ phosphors with multi-mode emissions were promising candidates for optical anti-counterfeiting. All the results indicated that the Ce³⁺/Tb³⁺ co-doped NaMgBO₃ phosphors were potential multi-platforms toward white-LED, field emission displays, and optical anti-counterfeiting applications.     

Reliability-based design optimization of problems with correlated input variables using a Gaussian Copula

The reliability-based design optimization (RBDO) using performance measure approach for problems with correlated input variables requires a transformation from the correlated input random variables into independent standard normal variables. For the transformation with correlated input variables, the two most representative transformations, the Rosenblatt and Nataf transformations, are investigated. The Rosenblatt transformation requires a joint cumulative distribution function (CDF). Thus, the Rosenblatt transformation can be used only if the joint CDF is given or input variables are independent. In the Nataf transformation, the joint CDF is approximated using the Gaussian copula, marginal CDFs, and covariance of the input correlated variables. Using the generated CDF, the correlated input variables are transformed into correlated normal variables and then the correlated normal variables are transformed into independent standard normal variables through a linear transformation. Thus, the Nataf transformation can accurately estimates joint normal and some lognormal CDFs of the input variable that cover broad engineering applications. This paper develops a PMA-based RBDO method for problems with correlated random input variables using the Gaussian copula. Several numerical examples show that the correlated random input variables significantly affect RBDO results.     

Reliability-based design optimization with confidence level under input model uncertainty due to limited test data

For obtaining a correct reliability-based optimum design, the input statistical model, which includes marginal and joint distributions of input random variables, needs to be accurately estimated. However, in most engineering applications, only limited data on input variables are available due to expensive testing costs. The input statistical model estimated from the insufficient data will be inaccurate, which leads to an unreliable optimum design. In this paper, reliability-based design optimization (RBDO) with the confidence level for input normal random variables is proposed to offset the inaccurate estimation of the input statistical model by using adjusted standard deviation and correlation coefficient that include the effect of inaccurate estimation of mean, standard deviation, and correlation coefficient.     

Position control of a mobile inverted pendulum system using radial basis function network

This article presents the implementation of position control of a mobile inverted pendulum (MIP) system by using the radial basis function (RBF) network. The MIP has two wheels to move on the plane and to balance the pendulum. The MIP is a nonlinear system whose dynamics is nonholonomic. The goal of this study was to control the MIP to maintain the balance of the pendulum while tracking a desired position of the cart. The reference compensation technique scheme is used as a neural network control method for the MIP. The back-propagation learning algorithm of the RBF network is derived for online learning and control. The control algorithm has been embedded on a DSP 2812 board to achieve real-time control. Experimental results are conducted and show successful control performances of both balancing and tracking the desired position of the MIP.